In some extreme scenarios(eg. crash, reboot, reset, etc...),
an established connection cannot guarantee that the port can be
closed properly, if we try to reconnect quickly after reset, the
connection will fail since the current port is same as the
previous one, the previous port connection has been hold on server side.
dynamically apply for the port base to avoid duplication.
Change-Id: I0089244b2707ea61f553a4dae09c7af3649c70bd
Signed-off-by: chao.an <anchao@xiaomi.com>
SO_ERROR is used to report asynchronous errors that are the result
of events within the network stack and not synchronous errors that
are the result of a library call(send/recv/connect)
Synchronous results are reported via errno.
Linux Programmer's Manual
...
NAME
getsockopt, setsockopt - get and set options on sockets
...
RETURN VALUE
...
On error, -1 is returned, and errno is set appropriately
Change-Id: I1a1a05a684dff8672aaf47eabee157ac0d275c2d
Signed-off-by: chao.an <anchao@xiaomi.com>
It's enough to check the buffer available in the net event handler
Change-Id: I2d7c7a03675cf6eff6ffb42a81b7c7245253e92c
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
All complaints fixed except for those that were not possible to fix:
- Used of Mixed case identifier in ESP32 files. These are references to Expressif ROM functions which are outside of the scope of NuttX.
Since the request address was not properly resolved before the handshake,
every time of connection, the handshake data will be overwitten into
arp packet and retransmitted until the next tcp timer.
Request the arp address before the handshake to avoid the retransmission.
Change-Id: I80118b9a8096c126c8e16cdf2f7b3d98fca92437
Signed-off-by: chao.an <anchao@xiaomi.com>
Sockets are created in two steps:
1. The socket is allocated, then
2. The socket is initialized.
In SMP mode, there is a possibility that a pthread executing one CPU may create a new task while a pthread on another CPU has allocated the socket but not yet initialized it. This commit updates the socket clone test to assure that the socket is both allocated and initailized.
Without the change, it is possible that uninitialized sockets could be cloned, leading to errors later in the newly started task.
netlink/netlink_conn.c: In function 'netlink_add_broadcast':
netlink/netlink_conn.c:319:45: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses]
319 | if (conn->groups & (1 << (group - 1)) == 0)
| ~~~~~~~~~~~~~~~~~~~^~~~
lpc2148_spi1.c:142:24: warning: initialization of 'uint32_t (*)(struct spi_dev_s *, uint32_t)' {aka 'unsigned int (*)(struct spi_dev_s *, unsigned int)'} from incompatible pointer type 'uint16_t (*)(struct spi_dev_s *, uint16_t)' {aka 'short unsigned int (*)(struct spi_dev_s *, short unsigned int)'} [-Wincompatible-pointer-types]
142 | .send = spi_send,
| ^~~~~~~~
lpc2148_spi1.c:142:24: note: (near initialization for 'g_spiops.send')
In file included from ieee802154/mac802154_bind.c:49:
ieee802154/mac802154_internal.h: In function 'mac802154_setdevmode':
ieee802154/mac802154_internal.h:788:42: warning: converting a packed 'enum ieee802154_devmode_e' pointer (alignment 1) to a 'const union ieee802154_attr_u' pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
788 | (FAR const union ieee802154_attr_u *)&mode);
| ^~~~~~~~~~~~~~~~~
chip/stm32_hciuart.c: In function 'hciuart_read':
chip/stm32_hciuart.c:2104:30: warning: statement with no effect [-Wunused-value]
2104 | ntotal == (ssize_t)ret;
| ~~~~~~~^~~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c: In function 'bcmf_wl_auth_event_handler':
wireless/ieee80211/bcm43xxx/bcmf_driver.c:579:23: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
579 | type = bcmf_getle32(&event->type);
| ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c:580:25: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
580 | status = bcmf_getle32(&event->status);
| ^~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c: In function 'bcmf_wl_scan_event_handler':
wireless/ieee80211/bcm43xxx/bcmf_driver.c:619:25: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
619 | status = bcmf_getle32(&event->status);
| ^~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c:620:35: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
620 | escan_result_len = bcmf_getle32(&event->len);
| ^~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_bdc.c: In function 'bcmf_bdc_process_event_frame':
wireless/ieee80211/bcm43xxx/bcmf_bdc.c:166:27: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
166 | event_id = bcmf_getle32(&event_msg->event.type);
| ^~~~~~~~~~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c: In function 'sdio_io_rw_direct':
wireless/ieee80211/bcm43xxx/mmc_sdio.c:157:3: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
157 | ret = SDIO_RECVR5(dev, SD_ACMD52, (uint32_t *)&resp);
| ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
79 | begin_packed_struct struct sdio_resp_R5
| ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c: In function 'sdio_io_rw_extended':
wireless/ieee80211/bcm43xxx/mmc_sdio.c:239:11: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
239 | ret = SDIO_RECVR5(dev, SD_ACMD53, (uint32_t *)&resp);
| ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
79 | begin_packed_struct struct sdio_resp_R5
| ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:244:11: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
244 | ret = SDIO_RECVR5(dev, SD_ACMD53, (uint32_t *)&resp);
| ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
79 | begin_packed_struct struct sdio_resp_R5
| ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:257:7: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
257 | ret = SDIO_RECVR5(dev, SD_ACMD53, (uint32_t *)&resp);
| ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
79 | begin_packed_struct struct sdio_resp_R5
| ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:265:3: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
265 | SDIO_RECVR1(dev, SD_ACMD52ABRT, (uint32_t *)&resp);
| ^~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
79 | begin_packed_struct struct sdio_resp_R5
| ^~~~~~~~~~~~
chip/stm32_adc.c: In function 'adc_reset':
chip/stm32_adc.c:2860:7: warning: unused variable 'ret' [-Wunused-variable]
2860 | int ret;
| ^~~
chip/stm32_adc.c: In function 'adc_shutdown':
chip/stm32_adc.c:3044:7: warning: unused variable 'ret' [-Wunused-variable]
3044 | int ret;
| ^~~
chip/stm32_i2c.c:722:12: warning: 'stm32_i2c_sem_wait_noncancelable' defined but not used [-Wunused-function]
722 | static int stm32_i2c_sem_wait_noncancelable(FAR struct i2c_master_s *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wireless/gs2200m.c: In function 'gs2200m_read':
wireless/gs2200m.c:727:20: warning: passing argument 1 of 'nxsem_wait' from incompatible pointer type [-Wincompatible-pointer-types]
727 | ret = nxsem_wait(dev);
| ^~~
| |
| struct gs2200m_dev_s *
.config:1207:warning: symbol value '' invalid for TESTING_OSTEST_FPUSIZE
platform/audio/cxd56_audio_analog.c:69:13: warning: inline function 'cxd56_audio_clock_is_enabled' declared but never defined
69 | inline bool cxd56_audio_clock_is_enabled(void);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
platform/audio/cxd56_audio_analog.c:68:13: warning: inline function 'cxd56_audio_clock_disable' declared but never defined
68 | inline void cxd56_audio_clock_disable(void);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
platform/audio/cxd56_audio_analog.c:67:13: warning: inline function 'cxd56_audio_clock_enable' declared but never defined
67 | inline void cxd56_audio_clock_enable(uint32_t clk, uint32_t div);
| ^~~~~~~~~~~~~~~~~~~~~~~~
chip/stm32_adc.c: In function 'adc_reset':
chip/stm32_adc.c:1348:7: warning: unused variable 'ret' [-Wunused-variable]
1348 | int ret;
| ^~~
chip/stm32_adc.c: In function 'adc_shutdown':
chip/stm32_adc.c:1496:7: warning: unused variable 'ret' [-Wunused-variable]
1496 | int ret;
| ^~~
chip/stm32_i2c.c:729:12: warning: 'stm32_i2c_sem_wait_uninterruptble' defined but not used [-Wunused-function]
729 | static int stm32_i2c_sem_wait_uninterruptble(FAR struct i2c_master_s *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wireless/lpwan/sx127x/sx127x.c:147:52: warning: missing terminating ' character
147 | # warning OOK support is not complete, RX+TX doesn't work yet!
| ^
str71_spi.c:435:24: warning: initialization of 'uint32_t (*)(struct spi_dev_s *, uint32_t)' {aka 'unsigned int (*)(struct spi_dev_s *, unsigned int)'} from incompatible pointer type
'uint16_t (*)(struct spi_dev_s *, uint16_t)' {aka 'short unsigned int (*)(struct spi_dev_s *, short unsigned int)'} [-Wincompatible-pointer-types]
435 | .send = spi_send,
| ^~~~~~~~
str71_spi.c:435:24: note: (near initialization for 'g_spiops.send')
chip/pic32mx-lowconsole.c:147:24: warning: 'pic32mx_getreg' defined but not used [-Wunused-function]
static inline uint32_t pic32mx_getreg(uintptr_t uart_base,
^
chip/pic32mx-gpio.c:113:20: warning: 'pic32mx_value' defined but not used [-Wunused-function]
static inline bool pic32mx_value(uint16_t pinset)
^
chip/pic32mz-gpio.c:124:20: warning: 'pic32mz_value' defined but not used [-Wunused-function]
static inline bool pic32mz_value(pinset_t pinset)
^
chip/pic32mx-usbdev.c:3065:1: warning: 'pic32mx_epreserved' defined but not used [-Wunused-function]
pic32mx_epreserved(struct pic32mx_usbdev_s *priv, int epno)
^
mmcsd/mmcsd_spi.c: In function 'mmcsd_mediachanged':
mmcsd/mmcsd_spi.c:1938:7: warning: 'return' with a value, in function returning void
return ret;
^
In file included from partition/fs_partition.c:42:0:
partition/partition.h:66:19: warning: 'read_partition_block' defined but not used [-Wunused-function]
static inline int read_partition_block(FAR struct partition_state_s *state,
^
local/local_netpoll.c: In function 'local_pollsetup':
local/local_netpoll.c:305:1: warning: label 'pollerr' defined but not used [-Wunused-label]
pollerr:
^~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: If3ea8f32b878aa218072130f7c3018f0d3c1aca5
arp/arp_notify.c:132:43: warning: for loop has empty body [-Wempty-body]
prev = curr, curr = curr->nt_flink);
^
sixlowpan/sixlowpan_tcpsend.c:806:31: warning: implicit conversion from 'unsigned int' to 'uint16_t' (aka 'unsigned short') changes value from 4294967295 to 65535 [-Wconstant-conversion]
_SO_TIMEOUT(psock->s_sndtimeo));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Numerous warnings like:
ieee802154_getreq.c:93:3: warning: implicit declaration of function 'memcpy' is invalid in C99 [-Wimplicit-function-declaration]
IEEE802154_EADDRCOPY(eaddr, req.attrval.mac.eaddr);
^
nxfonts/nxfonts_cache.c:839:35: warning: for loop has empty body [-Wempty-body]
fcache = fcache->flink);
bluetooth/bluetooth_finddev.c💯11: warning: implicit declaration of function 'memcmp' is invalid in C99 [-Wimplicit-function-declaration]
if (BLUETOOTH_ADDRCMP(dev->d_mac.radio.nv_addr, match->bf_addr))
^
rwbuffer.c:559:7: warning: variable 'ret' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
if (rwb->rhmaxblocks > 0 && rwb->rhnblocks > 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
These warnings fix a class of warnings that I saw during CI checks for macOS sim builds. For example:
devif/devif_callback.c:111:49: warning: for loop has empty body [-Wempty-body]
prev = curr, curr = curr->nxtdev);
^
devif/devif_callback.c:111:49: note: put the semicolon on a separate line to silence this warning
I did not put the semi-colon on a separate line, but used braces.
The same functionality could be implemented in the common place(netlink_recvfrom)
Change-Id: I8aedb29c4f0572f020ca5c0775f06c5e1e17ae4a
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
so netdb could reuse these global variable directly
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Iaa26ddbdaf416f64d43c6e8888a14bbe0c3405eb
Resolution of Issue 619 will require multiple steps, this part of the first step in that resolution: Every call to nxsem_wait_uninterruptible() must handle the return value from nxsem_wait_uninterruptible properly. This commit is only for those files under graphics/, mm/, net/, sched/, wireless/bluetooth.
Still to do: Files under fs/, drivers/, and arch. The last is 116 files and will take some effort.
* The appropriate size of stack varies among archs.
E.g. for 64-bit sim, 2048 is way too small, especially when the task
happens to use host OS functionalities.
I plan to allow an arch provide its own default.
* I plan to use this to replace hardcoded "STACKSIZE = 2048" in APPDIR.
The tcp_backlog is used when there is not process running to accept a new connection, but it is limited by the number of allocated backlog containers. The current error message induces the user to believe there is not free memory to allocate a new container, but actually the containers were allocated during the initialization and were available until the last element of the list has been removed to use.
since usrsock_conn_s::resp::result contain more detailed info and fix the below error in usrsocktest:
Testing group "WakeWithSignal" =>
[TEST ASSERT FAILED!]
In function "do_usrsock_blocking_connect_thread":
line 200: Assertion `(ssize_t)((*get_errno_ptr())) == (ssize_t)((test_abort ? 113 : 4))' failed.
got value: 110
should be: 113
[TEST ASSERT FAILED!]
In function "do_usrsock_blocking_connect_thread":
line 200: Assertion `(ssize_t)((*get_errno_ptr())) == (ssize_t)((test_abort ? 113 : 4))' failed.
got value: 110
should be: 113
[TEST ASSERT FAILED!]
In function "do_usrsock_blocking_connect_thread":
line 200: Assertion `(ssize_t)((*get_errno_ptr())) == (ssize_t)((test_abort ? 113 : 4))' failed.
got value: 110
should be: 113
[TEST ASSERT FAILED!]
In function "do_wake_test":
line 567: Assertion `(bool)((usrsocktest_test_failed)) == (bool)(false)' failed.
got value: 1
should be: 0
Group "WakeWithSignal": [FAILED]
Fix the below error in usrsocktest:
Testing group "WakeWithSignal" =>
[TEST ASSERT FAILED!]
In function "do_usrsock_blocking_socket_thread":
line 122: Assertion `(ssize_t)((*get_errno_ptr())) == (ssize_t)((115))' failed.
got value: 123
should be: 115
[TEST ASSERT FAILED!]
In function "do_wake_test":
line 567: Assertion `(bool)((usrsocktest_test_failed)) == (bool)(false)' failed.
got value: 1
should be: 0
Group "WakeWithSignal": [FAILED]
MSG_DONTWAIT (since Linux 2.2)
Enables nonblocking operation; if the operation would block, the
call fails with the error EAGAIN or EWOULDBLOCK. This provides
similar behavior to setting the O_NONBLOCK flag (via the fcntl(2)
F_SETFL operation), but differs in that MSG_DONTWAIT is a per-call
option, whereas O_NONBLOCK is a setting on the open file description
(see open(2)), which will affect all threads in the calling process
and as well as other processes that hold file descriptors referring
to the same open file description.
Historically, the loopback driver used the largest packet size of all enabled link layer protocols. This permitted packets to be forward via the loopbak device with no major loss of performance. However, in experimenting with configurations where no other link layer protocols were enabled, this means the loopback packet size was set to the smallest possible size, to the SLIP minimum of 296 bytes. This resulted in terrible loopback performance.
This commit adds an option to increase the loopback packet size with the option CONFIG_NET_LOOPBACK_PACKETSIZE.
The loopback driver packet buffer should be quite large. The larger the loopback packet buffer, the better will be TCP performance of the loopback transfers. The Linux loopback device historically used packet buffers of size 16Kb, but that was increased in recent Linux versions to 64Kb. Those sizes may be excessive for resource constrained MCUs, however.
The network still enforces the lower limit that is the maximum packet size of all enabled link layer protocols. But this new option permits the loopback packet size to be increased from that.
* net/Kconfig: Adds CONFIG_NET_LOOPBACK_PKTSIZE option
* include/nuttx/net/netconfig.h: Assures that the packet size that is used is at least as large as the largest packet size of other link layer protocols.
* drivers/net/loopback.c: Use that larger packet size.
* boards/sim/sim/sim/configs/tcploop/defconfig: Set the loopback packet size to 1500
Build nucleo-144/f767-netnsh fail with below error:
In file included from igmp/igmp_initialize.c:54:
./igmp/igmp.h:130:3: error: unknown type name 'sem_t'
130 | sem_t sem; /* Used to wait for message transmission */
| ^~~~~
make[1]: *** [igmp_initialize.o] Error 1
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
1. Remove the unused and unimplemented ipv6_chksum declaration
2. Update NET_ARCH_CHKSUM description to align with the implementation
3. Declare all checksum function prototype regardless CONFIG_NET_ARCH_CHKSUM
4. Remove the CONFIG_NET_ARCH_CHKSUM guard for tcp_ipv[4|6]_chksum
Author: Gregory Nutt <gnutt@nuttx.org>
net/tcp: Fix errors found in build testing.
Recent re-organization moved some functions from net/inet to net/tcp and net/udp. This include references to nxsem_wait(), SEM_PRIO_NONE, and other internal NuttX semaphore functions. These all failed to compile because nuttx/semaphore.h was not included in any of the files.
Author: Alan Carvalho de Assis <acassis@gmail.com>
Run nxstyle against .c and .h files and fix it
Author: Juha Niskanen <juha.niskanen@haltian.com>
Fix typos and some incorrect comments
NuttX follows OpenGroup.org: https://pubs.opengroup.org/onlinepubs/009695399/functions/recv.html :
[EAGAIN] or [EWOULDBLOCK]
The socket's file descriptor is marked O_NONBLOCK and no data is waiting to be received; or MSG_OOB is set and no out-of-band data is available and either the socket's file descriptor is marked O_NONBLOCK or the socket does not support blocking to await out-of-band data.
ETIMEDOUT is not a valid error to be returned from recv() or recvfrom().
Author: chao.an <anchao@xiaomi.com>
net/udp: break the network lock to avoid deadlock
network deadlock when udp sendto() storm is coming
net/close: force wait tx drain to complete
atomic send() and close() will causes data to be discarded directly
Signed-off-by: chao.an <anchao@xiaomi.com>
