sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4,784 Commits 1 Branch 0 Tags 291 MiB
c641b8fed4
Commit Graph

3752 Commits

Author SHA1 Message Date
Gregory Nutt
11eec5f5d8 Tiva Timer: Revert the previous change. Thre is a better way to handler timerout interrupts. 
Removed setting of the initial timer interval load value (or, rather, it is always set to zero for a free-running timer).  Also, do not unconditional enable the timer out interrupt.  The timerout interrupt is not not enabled until tiva_timer32_setinterval() is called.
 2015-01-14 07:33:59 -06:00
Gregory Nutt
db59dd2208 Tiva Timer: Remove a big chunk of unnecessary logic 2015-01-13 17:08:37 -06:00
Gregory Nutt
fe4e3f4529 Tiva Timer: Timer test must attach a timer handler or the timer is stopped at the first interrupt 2015-01-13 15:55:54 -06:00
Gregory Nutt
08638e10bd Timer Timer: Timer driver now initializes without complaints. Need a test driver of some kind to make more testing progress. 2015-01-13 11:49:00 -06:00
Gregory Nutt
5aab327457 DK-TM3C129X Timer: Add timer initialization logic to the board bring-up 2015-01-13 11:10:35 -06:00
Gregory Nutt
0aa32a003c Tiva Timer: Rename tiva_timerlow.c to tiva_timerlow32.c since it only supports 32-bit periodic timers 2015-01-13 10:10:02 -06:00
Gregory Nutt
ffa34aa5db Tiva Timer: Completes implementation of the timer driver lower half 2015-01-13 10:06:40 -06:00
Gregory Nutt
1bd74b4dcc Tiva Timer: Allow timeout interrupts even if the reload value is zero. That is the value that is need to get an interrupt on the wrap from 0xffffffff to 0x00000000 2015-01-13 08:29:25 -06:00
Gregory Nutt
cfc0732c57 Tiva Timer: Add conditional compilation to enable/disable each timer feature. Not only does this reduce the footprint by suppressing unused features, it also protects from partially implemented features that are now conditioned on EXPERIMENTAL 2015-01-13 07:49:20 -06:00
Gregory Nutt
73e6fc8142 Tiva Timer: Rename tiva_timer.c to tiva_timerlib.c 2015-01-12 15:55:41 -06:00
Gregory Nutt
f93e69e94e Tiva Timer: First cut at timer driver lower half (still incomplete) 2015-01-12 15:52:48 -06:00
Gregory Nutt
4510be6c7d Tiva Interrupts: Changes corresponding to the last needed in the Tiva Kconfig file as well 2015-01-12 10:14:48 -06:00
Gregory Nutt
9e546ff37a Tiva interrupts: Fix chip-specific interrupt un-definitions 2015-01-12 10:00:42 -06:00
Gregory Nutt
90da8aa71d Tiva Timers: Add interfaces to read the current timer value 2015-01-12 10:00:41 -06:00
Gregory Nutt
e5a0dcd0f9 USB host drivers: Change all parmeters named class to usbclass to avoid C++ conflicts 2015-01-11 08:05:09 -06:00
Gregory Nutt
b75c43f6ef Tiva Timer: Fix a typo 2015-01-10 12:42:39 -06:00
Gregory Nutt
3c06976ba7 Tiva Timer: Implements configuration of the 32-bit RTC timer 2015-01-10 12:41:15 -06:00
Gregory Nutt
c0e1dc3b8a Tiva Timer: Add support for RTC match interrupts 2015-01-10 12:22:37 -06:00
Gregory Nutt
a2a5c47d9d Tive Timer: Add support for ADC trigger generation from one-shot and periodic timers for timeout and match evetns 2015-01-10 10:07:56 -06:00
Gregory Nutt
2eeca96330 Tiva Timer: Add support to set the match regiser(s) relative to the timer counter (and prescale) registers. Enable match interrupts. These are one time interruprts: After the match interrupt is dispatched, further match interrupts are disabled 2015-01-10 08:34:39 -06:00
Gregory Nutt
2871677362 Tiva Timer: Add support for input clock prescaler in 16-bit one-shot/periodic modes 2015-01-09 16:49:00 -06:00
Gregory Nutt
df48abcc47 Tiva Timer: Add logic to acknowledge Tiva Timer interrupts 2015-01-09 15:01:49 -06:00
Gregory Nutt
9ae597c441 Tive System Control: Add logic to configure the alternatie clock source (ALTCLK). Needed by the Tiva timer module 2015-01-09 14:10:31 -06:00
Gregory Nutt
7384857658 Tiva Timer: Add more interrupt management logic 2015-01-09 13:29:03 -06:00
Gregory Nutt
626d6cdab4 Tiva Timer: Add functions to set match registers; Add logic to select count direction 2015-01-09 12:05:26 -06:00
Gregory Nutt
8552b2f679 Tiva Timer: Add interfaces to start/stop timers and to set the interval load registers. 2015-01-09 11:07:52 -06:00
Gregory Nutt
d5d3a23ac3 Tiva Timers: Add framework to support tmer interrupts 2015-01-09 10:21:59 -06:00
Gregory Nutt
1193b4aa55 STM32 SDIO: Don't let architectures select CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE unless they have implemented SDIOWAIT_WRCOMPLETE 2015-01-08 17:47:34 -06:00
Gregory Nutt
09bd382697 Tiva Timer: Partial support for 16- and 32-bit, oneshot and periodic timer configurations 2015-01-08 13:44:10 -06:00
Gregory Nutt
58818e1afd Tiva Timer: Add support to select alternate clock source and 32-bit register concatenation mode. 2015-01-08 11:08:54 -06:00
Gregory Nutt
d3bc0b7223 Tiva Timer: Add register level debug support 2015-01-08 10:14:38 -06:00
Gregory Nutt
6c612cf967 Tiva Timer: Add basic framework to configure timers. Incomplete on initial commit 2015-01-08 09:47:38 -06:00
Gregory Nutt
92dc58c376 Tiva Timer: SYNC regiser is only available on GPTM0 2015-01-08 08:07:31 -06:00
Gregory Nutt
e55df605a8 Tiva Timer: Update timer register bit definitions for the LM4F 2015-01-08 08:03:47 -06:00
Gregory Nutt
1ed2956ad5 Tiva Timer: Extend timer register definitions to handle other chips 2015-01-08 07:56:00 -06:00
Gregory Nutt
1ace391fcf MMCSD SDIO: Add support for a new SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait loop to pool the card R1 start to determine when the card was ready for the next transfer. That busy-wait can be quite long -- hundreds of milliseconds. And alternative is to look the the SD D0 pin which will change state when the card is no longer busy. 
This logic implements a change the avoids the busy-wait poll by reconfiguring the SD D0 pin as a GPIO interrupt, then waiting for the card to becom ready without taking up CPU cycles.

This change is conditioned on CONFIG_MMCSD_SDIOWATI_WRCOMPLETE and is currenlty only implemented for the STM32 SDIO driver.

From David Sidrane
 2015-01-08 06:23:42 -06:00
Gregory Nutt
5c68f0dd34 Tiva Timer: Missed one register bit field definition 2015-01-07 12:03:08 -06:00
Gregory Nutt
9eb693845e TM4C129X Timer: Completes timer register definition header file 2015-01-07 11:43:56 -06:00
Gregory Nutt
81afc06f54 TM4C129X Timer: Add some missing addresses and some of the register bit definitions. Still incomplete 2015-01-07 10:07:47 -06:00
Gregory Nutt
28a52cbd23 TM4C129X Timer: Update addresses in the timer register definitions file. Still missing bit field definitions 2015-01-07 08:57:48 -06:00
Gregory Nutt
0748291ce9 Tiva IRQs: Fix IRQ control logic; was limited to only 64 IRQs. That is a problem for higher numbered IRQs on many platforms 2015-01-06 10:49:47 -06:00
Gregory Nutt
c429a4d93f Tiva I2C: For TM4C, high speed mode is now configurable (but disabled as EXPERIMENTAL) 2015-01-06 10:48:08 -06:00
Gregory Nutt
10b349bd1a Tiva PHY Interrupts: Need to read the PHY interrupt status register in order to clear the pending PHY interrupt 2015-01-05 15:12:45 -06:00
Gregory Nutt
52c4334429 Tiva: Fixes to support building Tiva TM4C129X I2C driver 2015-01-05 13:15:40 -06:00
Gregory Nutt
67aeab7105 Tiva: Update I2C register definitions to include support for the TM4C129X 2015-01-05 13:08:07 -06:00
Gregory Nutt
c4f64c72c8 Tiva Ethernet: Add support for PHY interrupts 2015-01-03 13:16:26 -06:00
Gregory Nutt
40113f0b93 Tiva Ethernet: Configure external PHY interrupt pin 2015-01-03 10:59:12 -06:00
Gregory Nutt
a7e0acbc6f Tiva Ethernet: Removed logic that holds the PHY and re-ordered some reset logic. Can not ping the DK 2015-01-03 09:28:54 -06:00
Gregory Nutt
15f0a046fd Tive Ethernet: Wait for EMAC to come out of reset before accessing any registers 2015-01-03 06:52:19 -06:00
Gregory Nutt
6bb12a34dc Tiva serial: Add volatile to fix a wait loop that was not waiting; CR really should preced LF in CR-LF expansion 2015-01-02 14:05:42 -06:00
Gregory Nutt
28d44e1b30 Cosmetic changes 2015-01-02 13:59:47 -06:00
Gregory Nutt
b828741900 Tiva: Fix typos in conditional compilation 2015-01-02 13:59:30 -06:00
Gregory Nutt
91a92fc538 Tiva Ethernet: Add lots of debug output for testing 2015-01-02 13:10:25 -06:00
Gregory Nutt
ce3dac34b2 Tiva: If peripheral ready register not available, then lets say the peripheral is ready 2015-01-02 12:58:20 -06:00
Gregory Nutt
194e5a9600 Tiva: Wait for the console UART to be ready before configuring it 2015-01-02 12:57:41 -06:00
Gregory Nutt
47b8ce855e Tiva Ethernet: Fix compile problem when debug enabled 2015-01-02 12:04:22 -06:00
Gregory Nutt
86dc1726aa Tiva GPIO: Fix a compiler error when debug is enabled with TM4C129X 2015-01-02 11:53:02 -06:00
Gregory Nutt
9688a9aacb Tiva Ethernet: MMC interrupts need to be disable initially 2015-01-02 11:40:48 -06:00
Gregory Nutt
ea3895c2e8 Tiva Ethernet: Update DMA BUSMODE settings based on TI example code 2015-01-02 11:10:41 -06:00
Gregory Nutt
67699b8cae Tiva Ethernet: Update PHY initialization 2015-01-02 10:11:57 -06:00
Gregory Nutt
a97d304d1a STM32 RTC: Add Kconfig options needed with the preceding commit 2015-01-02 06:45:45 -06:00
Gregory Nutt
7b89f64b37 stm32-rtc: Add support for the internal low speed clock (LSI) 
Some boards do not have the external 32khz oscillator installed, for those boards we must fallback to the crummy to the crummy internal RC clock.  Turn on by defining CONFIG_RTC_LSICLOCK.

From Kevin Hester <kevinh@geeksville.com> via Lorenz Meier.
 2015-01-02 06:32:40 -06:00
Gregory Nutt
367af5c65d Cosmetic update to some comments 2015-01-02 06:07:56 -06:00
Gregory Nutt
adb9ac6c60 Cosmetic change to file formatting 2015-01-01 15:55:33 -06:00
Gregory Nutt
bc3fc9e3a3 TM4C129X Ethernet: Add logic to get pre-programmed MAC address from user FLASH registers 2015-01-01 12:28:46 -06:00
Gregory Nutt
48f6e06ed1 Tiva FLASH: Add FLASH register definitions for the TM4C129 family 2015-01-01 11:44:35 -06:00
Gregory Nutt
e83f531724 Tiva PHY: Hard code some properties of the internal PHY 2015-01-01 08:11:17 -06:00
Gregory Nutt
14992be38f Tiva Ethernet: Update Ethernet intializaiton logic. Still things to be done 2015-01-01 07:55:15 -06:00
Gregory Nutt
61edf50f9a Tiva: Add peripheral ready header file; fix typos in clock/pwr enable header files 2015-01-01 07:54:31 -06:00
Gregory Nutt
0eb224aeae Ethernet skeleton: Add some more example logic 2014-12-31 13:45:19 -06:00
Gregory Nutt
cc038a61f6 Tiva Ethernet: Integrate use of workqueue so the network processing is not done at the interrupt level 2014-12-31 13:03:00 -06:00
Gregory Nutt
b81661c258 Tiva Ethernet: Add basic clock/power controls for Ethernet and internal PHY 2014-12-31 11:40:01 -06:00
Gregory Nutt
903e7f5d2b Tiva Ethernet: First cut at TM4C129X Ethernet driver. Initial commit is basically just the STM32 Ethernet driver with modifications for a clean compilation in the Tiva environment 2014-12-31 11:34:24 -06:00
Gregory Nutt
a96c91db1e Tiva Ethernet: Minor naming update for compatibility 2014-12-31 09:39:00 -06:00
Gregory Nutt
7c07766468 Tiva Ethernet: Add DMA descriptor definitions 2014-12-31 07:32:11 -06:00
Gregory Nutt
119e957472 Mostly cosmetic 2014-12-30 17:00:15 -06:00
Gregory Nutt
f61d15bb55 Tiva Ethernet: Completes TM4C129X Ethernet register definition header file 2014-12-30 13:42:19 -06:00
Gregory Nutt
408139dada Don't error out if no ethernet definitions available 2014-12-30 13:26:18 -06:00
Gregory Nutt
9a71dc091b Tiva Ethernet: More progress with register bit definitions 2014-12-30 11:08:18 -06:00
Gregory Nutt
8cea115be7 Tiva Ethernet: More progress with register bit definitions 2014-12-30 09:22:24 -06:00
Gregory Nutt
6bd5702778 TM4C129G Ethernet: Add Ethernet register addresses. Header files still incomplete 2014-12-30 08:09:09 -06:00
Gregory Nutt
1dc66f3104 Tiva: Add framework to support the uniqueu TM4C Ethernet register definitions 2014-12-30 07:07:16 -06:00
Gregory Nutt
a0727124c2 stm32: update description and code documentation. Also fixes a few code formattings. 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-29 09:59:46 -06:00
Gregory Nutt
1a27614552 stm32: fix wait upon vertical blank. This should never have occurred before. 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-29 09:48:25 -06:00
Gregory Nutt
171c017a0c stm32: fix faulty access to non existing layer. This disables operation that requires double layer support, when configured for single layer only. 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-29 09:45:30 -06:00
Gregory Nutt
ad9429a527 Tiva SSI: Fix oversight in last commit. Would only fixe the case where the single SSI enabled was SSI0 2014-12-28 16:58:36 -06:00
Gregory Nutt
c802d5276b Tiva SSI: Fix some recent breakage to the Tiva SSI driver for the case where only one SSI modules is enabled 2014-12-28 16:55:47 -06:00
Gregory Nutt
59c6f42be4 STM32 Serial: PX4 HW workarround for flaky STM32 RTS. From David Sidrane 2014-12-27 18:58:18 -06:00
Gregory Nutt
d597e94332 Remove STM32-specific RX flow control logic from the upper level serial driver to the lower level STM32 serial driver 2014-12-27 09:45:45 -06:00
Gregory Nutt
405d72c1ad Serial Upper Half: Add watermarks to RX flow control logic 2014-12-27 07:43:06 -06:00
Gregory Nutt
214183ff93 STM32: Fix some incorrectly placed conditional logic 2014-12-26 12:41:35 -06:00
Gregory Nutt
78affd0f9a EFM32 Timer/PWM: Add support for timer/PWM EFM32GG. From Pierre-noel Bouteville 2014-12-26 09:55:19 -06:00
Gregory Nutt
45a93bb30e ARMv7M: More runtine stack checking logic. From David Sidrane 2014-12-26 08:46:25 -06:00
Gregory Nutt
570943bd71 STM32 I2C: Add strings to decode trace events. From David Sidrane 2014-12-26 08:35:21 -06:00
Gregory Nutt
831167f806 Add support for run time stack checking for the STM32. From David Sidrane 2014-12-26 08:30:42 -06:00
Gregory Nutt
8a2a594348 Tiva: Update UART header file for TM4C129X 2014-12-22 14:11:56 -06:00
Gregory Nutt
21f6598faf Tiva: Upate GPIO header file for TM4C129X 2014-12-22 12:59:13 -06:00
Gregory Nutt
f91583af61 TM4C129X: Simplify be removing unnecessary temporary variable 2014-12-22 12:01:33 -06:00
Gregory Nutt
bd2d83c656 TM4C129X: Simplify be removing unnecessary temporary variable 2014-12-22 11:53:31 -06:00
Gregory Nutt
3b863966fe TM4C129X: First cut at new Tiva clock configuration logic 2014-12-22 11:45:10 -06:00
Gregory Nutt
5184e4dade TM4C129X: A small step toward understanding new Tiva clocking 2014-12-22 09:30:41 -06:00
Gregory Nutt
7b6d0391ab Tiva: Rename TIVA_CRC_BASE to TIVA_CCM_BASE 2014-12-21 17:44:11 -06:00
Gregory Nutt
488b02ff6c Tiva: Add support for I2C6-9 2014-12-21 17:20:16 -06:00
Gregory Nutt
f26384c386 Tiva SSI and board configurations: hange negative Tiva logic CONFIG_SSIx_DISABLE to positive logic CONFIG_TIVA_SSIx. Add support for SSI2 and SSI3 2014-12-21 15:23:37 -06:00
Gregory Nutt
3ea03b9806 Improved comments 2014-12-21 14:09:04 -06:00
Gregory Nutt
f4543de408 TM4C129X: Increated power/clocking macros into I2C driver 2014-12-21 13:02:12 -06:00
Gregory Nutt
20986de89e TM4C129X: Add macros to enable/disable peripheral power 2014-12-21 11:40:39 -06:00
Gregory Nutt
9857b59e79 Tiva SSI: Use portable macros to enable peripheral clocking 2014-12-21 11:16:21 -06:00
Gregory Nutt
8ed83ac3a5 Tiva: More run mode clock enable macros 2014-12-21 11:02:56 -06:00
Gregory Nutt
d701532141 TM4C129X: Framework for new Tiva clocking logic (details not yet implemented) 2014-12-21 10:14:40 -06:00
Gregory Nutt
36acfdb26f Tiva: Completes first cut at system control header file 2014-12-20 12:05:22 -06:00
Gregory Nutt
22b4def56e Tiva: More TM4C129 system control register definitions 2014-12-20 11:10:10 -06:00
Gregory Nutt
e14608b272 Tiva: More TM4C129 system control register definitions 2014-12-20 09:59:21 -06:00
Gregory Nutt
b49f8b3baf Tiva: Add a configuration setting to better distinguish TM4C123 and 129 families. Reanem tm4c_syscontrol.h to tm4c123_syscontrol.h; rename tm4c129x_syscontrol.h to tm4c129_syscontrol.h 2014-12-20 08:38:11 -06:00
Gregory Nutt
ffae2cb3d7 Tiva: Updates to system control regiser definitions 2014-12-20 08:22:17 -06:00
Gregory Nutt
16a302e732 STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review 2014-12-19 14:52:17 -06:00
Gregory Nutt
44d72c6545 stm32: Add configuration option for ltdc 
This adds the following ltdc configuration options:
- dither support
- cmap support, is this the right place for CONFIG_FB_CMAP?
- support for extended ltdc interface

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:58:39 -06:00
Gregory Nutt
193edfb7be stm32: implements ltdc frambuffer and support for ltdc layer operation 
This implements the framebuffer support for the generic nuttx framebuffer
interface, (see nuttx/video/fb.h)

This also implements the interface to perform hardware accelerated layer
operation by the ltdc controller and dma2d controller later (see
nuttx/video/ltdc.h).

The following methods are supported by the ltdc interface:

- getvideoinfo
  Get video information of the layer

- getplaneinfo
  Get plane information of the layer

- getlid
  Handle specific layer identifier. This allows to detect to current layer
  state (e.g. important for layer flipping)

- setclut
  Set the layer color lookup table. Up to 256 color entries supported.

- getclut
  Get the layer color lookup table

- setcolor
  Set the default layer color. In the context of the ltdc layer this means set
  the default color outside the active area or if the layer is disabled.

- getcolor
  Get the default layer color

- setcolorkey
  Set the layer colorkey (chromakey). Colorkey is enabled by blendmode
  LTDC_BLEND_COLORKEY

- getcolorkey
  Get the layer colorkey

- setalpha
  Set the constant alpha value. If blend mode LTDC_BLEND_SRCPIXELALPHA or
  LTDC_BLEND_DESTPIXELALPHA is defined than the blended color is calculated
  by the formel:
    Cdest = Pixelalpha * Constalpha * Csrc.
  Otherwise:
    Cest = Constalpha * Csrc

- getalpha
  get the alpha value

- setblendmode
  Set the layer blendmode.
  Supported blendmodes:
    non blendmode (do not perform blend operation independent on the layers
                   alpha and colorkey)
    alpha          alpha blending (transparency)
    destpixelalpha use pixel alpha value for the top layer (Layer2)
    srcpixelalpha  use pixel alpha value for the subjacent layer (Layer1)
    colorkey       enable colorkey

- getblendmode
  Get the layer blendmode

- setarea
  Set the active layer area, the visible rectangle inside the whole layer.
  This also allows to change the position of the whole layer which is visible in
  the selected area independent on the area position.

- getarea
  Get the active layer area

- update
  Reload the layer shadow register and make changes visible. Also supports
  layer flipping.

Note! Dithering and background color are static parameter and can only changed
at build time.

Implementation details:

The implementation of ltdc interface was inspired by SDL and DirectFB.
All layer settings are shadowed before they become active (except setclut).
They are still inactive until the layer is updated. This is done by the update
method. Should clut only active after an update or not? Clut is used for drawing
while the other settings usually used for blend or blit operations. So i think
this should be the right way.

The implementation of ltdc interface was inspired by SDL and DirectFB.
All layer settings shadowed before they become active (except clut).
They are still inactive until the layer is updated. This is done by the update
call. Should clut only activated after an update or not? Clut is used for draw
operation while the other settings usually used for blend or blit operations.
So i think this should be the right way.

Deviations from the ltdc hardware implementation:

- Shadow register update of both layer (Layer1 or Layer2) is independent as long
  LTDC_UPDATE_SIM is not set. This flag allows to update both layer simultaneous.
  Otherwise only the desired layer is updated.

Layer operation:

Keep in mind, both layer are allways active (of course if both enabled by the
configuration). First the Layer 1 is blended with the background color and the
result is blended with the Layer2. To avoid blend effects, set the Layer2 in non
blend mode. This is equal to blend with alpha = 255. Enable blending of Layer2
with the background color by enable blending of Layer1 and disable the opacity
by setting the alpha value to 0.

Layer flip:

A layer flip usual mean swapping two framebuffer. So the current inactive buffer
can refreshed with data while the active framebuffer is visible. A flip
operation changes the inactive layer to the active one and vice versa.

The ltdc implementation supports layer flip. This can be done by the update call
and the flag LTDC_UPDATE_FLIP. In this case ltdc makes the inactive layer
invisible. In detail, the inactive layer is disabled and the blendmode reset.
Detection of the current layer state (e.g. active or inactive) is supported
by the getlid method combined with one of the LTDC_LAYER_* flags.
Maybe an additional method "flip" for flip operation should be added to the ltdc
interface? But this make no sence from my view if the layer is a non LTDC layer,
e.g. playing with dma2d only.

Supported and tested nuttx pixel formats:

Single Layer without LTDC interface support:
- FB_FMT_RGB8 (cmap support required)
- FB_FMT_RGB16_565
- FB_FMT_RGB24

Single Layer with LTDC interface support:
- FB_FMT_RGB8 (cmap support required)
- FB_FMT_RGB16_565
- FB_FMT_RGB24

Dual Layer with LTDC interface support:
- FB_FMT_RGB8 (cmap support required)
- FB_FMT_RGB16_565
- FB_FMT_RGB24

Why is FB_FMT_ARGB8888 missing?

Changes:
- Remove unused register debug method.

Todo:
- Add support for backlight, currently not neccessary

Did i forgot something? Take a look in the ltdc example or the interface
description (see nuttx/include/video/ltdc.h).

Thanks to Ken for the base layout. ;)

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:48:53 -06:00
Gregory Nutt
83d87e5ef7 stm32: Add infrastructure for dma2d support 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:41:08 -06:00
Gregory Nutt
060a61dfac stm32: Add common stm32 layer description. This defines a common layer description for the ltdc and dma2d controller. 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:37:08 -06:00
Gregory Nutt
df31cf1db8 stm32: configure PLLSAI clock to enable ltdc register access 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:30:58 -06:00
Gregory Nutt
3385fe60cf stm32: Add missing clut register definition 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:28:42 -06:00
Gregory Nutt
e9074c8a44 stm32: rename CFBLR register name to the name used in the reference manual 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:26:04 -06:00
Gregory Nutt
f181dcef29 stm32: rename PLLSAI register name to this one in the reference manual 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:21:39 -06:00
Gregory Nutt
58e4e69656 TM4C129X: Add custom system control header file (incomplete) 2014-12-19 12:12:52 -06:00
Gregory Nutt
da700ddc06 Tiva: Fix configuration logic for IRQ interrupts. The various parts support varying numbers of GPIO blocks and with varying capabilities to support interrupts on the pins of different GPIO blocks 2014-12-18 15:33:52 -06:00
Gregory Nutt
aabd4c59a3 Tiva: Change negative logic CONFIG_TIVA_DISABLE_GPIOx_IRQS to positive logic CONFIG_TIVA_GPIOx_IRQS 2014-12-18 15:19:16 -06:00
Gregory Nutt
83c56151ab Tiva: Add GPIO interrupt support for the TMS4C129X 2014-12-18 11:52:06 -06:00
Gregory Nutt
a719e75851 DK-TM4C129X: Fixes to get clean build. Logic is still not complete, however 2014-12-18 08:24:24 -06:00
Gregory Nutt
05d7520461 TM4C129X: Add pin multiplexing 2014-12-17 11:55:45 -06:00
Gregory Nutt
327a554d0b Tiva TM4C129X: Fix some errors in memory map 2014-12-17 09:42:37 -06:00
Gregory Nutt
14b987dbfa Add memory map for the TM4C129X 2014-12-17 09:40:56 -06:00
Gregory Nutt
aa724ea75b Add interrupt definitions for the TM4C129X 2014-12-17 08:19:23 -06:00
Gregory Nutt
1410a650e0 Tiva: Better distinguish features of the TM4C1294xx and the TM4C129Xxx 2014-12-16 18:02:59 -06:00
Gregory Nutt
29d23ae626 Remove packaging indications for TM4C129 configuration variables 2014-12-16 16:22:52 -06:00
Gregory Nutt
188e092398 Add TM4C129XNCZAD and TM4C1294NCPDT to the Tiva configuration system 2014-12-16 16:02:21 -06:00
Gregory Nutt
f284c5cab2 Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg() 2014-12-16 09:54:32 -06:00
Gregory Nutt
da8b040984 More changes associated with GPIO interrupt for the KL architecture from Alan Carvalho de Assis 2014-12-13 17:30:25 -06:00
Gregory Nutt
810fcd297e Add GPIO interrupt capability for the KL architecture. The patch is almost the same as kinetis_pinirq.c, just minor modifications and rename kl_pinirq to kl_gpioirq to make it more generic to developers. From Alan Carvalho de Assis 2014-12-13 17:27:06 -06:00
Gregory Nutt
a574a3cc8a STM32 LTDC: Fix a typo in conditional compilation 2014-12-13 07:45:42 -06:00
Gregory Nutt
f8592281a7 STM32 OTG HS DEV (in FS mode): Disable ULPI clock enable in RCC AHB1 Register. If Both ULPI and the FS clock enable bits are set in FS mode, then the ARM never awakens froom WFI due to a chip issue. From Ken Pettit 2014-12-13 07:44:13 -06:00
Gregory Nutt
c653ff5ce4 Tiva I2C: Don't try to ACK and STOP on the same byte. Improve logic that suppresses STOP on a repeated start 2014-12-12 12:13:31 -06:00
Gregory Nutt
54c8d5c6e4 Tiva I2C: Legacy mode reset logic ommitted in last commit 2014-12-12 09:31:17 -06:00
Gregory Nutt
19ef820925 Tiva I2C: Add logic to reset I2C when busy hangs with busy 2014-12-12 09:26:10 -06:00
Gregory Nutt
dd3d417aed STM32 OTGHS Device: Fix for OTGHS core working in FS mode. From Ken Pettit 2014-12-12 07:43:32 -06:00
Gregory Nutt
310983bee6 Cosmetic change to force compliance with coding standard 2014-12-12 07:14:16 -06:00
Gregory Nutt
1311e76adc Tiva I2C: Fix how I2C transactions are started and some I2C error reporting 2014-12-11 12:31:42 -06:00
Gregory Nutt
04d8169f0f Tiva I2C: All SDA pins should be open drain, but all SCL pins should be digital output 2014-12-11 12:30:48 -06:00
Gregory Nutt
218967b80e Tiva I2C: Add register-level debug capability 2014-12-11 09:34:03 -06:00
Gregory Nutt
6a98255aa0 Tiva I2C: Minor clean-up to I2C tracing 2014-12-11 08:11:32 -06:00
Gregory Nutt
2e8ad53ed4 Tiva I2C: Fix error in assertion logic 2014-12-11 07:02:14 -06:00
Gregory Nutt
af31b219a3 Tiva I2C: Add I2C options to Kconfig 2014-12-10 13:56:00 -06:00
Gregory Nutt
37eb362b08 Tiva I2C: Add workaround for errata; clean up some error handling 2014-12-10 13:01:47 -06:00
Gregory Nutt
38bd919930 Tiva I2C: Driver is code complete but untested 2014-12-10 12:43:46 -06:00
Gregory Nutt
bdd5289100 Tiva i2C: Lots of compilation fixes 2014-12-10 08:47:34 -06:00
Gregory Nutt
0951d80d45 Simplify I2C master/slave addresing to simplify driver development 2014-12-10 08:47:07 -06:00
Gregory Nutt
3313cee55c Tiva I2C: Finishes initialization logic 2014-12-10 07:31:44 -06:00
Gregory Nutt
7373e66213 Tiva: Do I2C clock initialization without using legacy registers. Necessary for I2C3-5 2014-12-09 15:28:10 -06:00
Gregory Nutt
90c98f8526 Add a little bit more Tiva I2C initialization logic 2014-12-09 14:48:24 -06:00
Gregory Nutt
f851a1328e Fix typo in Tiva UART regiser address definition. SourceForge Ticket #37 2014-12-09 12:18:41 -06:00
Gregory Nutt
286a142a08 Tiva: Add build framework and skeleton files for Tiva I2C driver. Initial commit is just the STM32 I2C driver with name changes and STM32-specific logic removed 2014-12-09 12:18:40 -06:00
Gregory Nutt
1d43784c48 Update the Tiva I2C register definitions for the TM4C123 and TM4C129 2014-12-09 08:42:12 -06:00
Gregory Nutt
cb9e3c2bb9 Set the GPIO_SPEED_50MHz on all F2 and F4 SPI pin configurations. This is based on an F411 SPI1 errata but the fixed is generalized to all SPI and all F2 and F4 (let me know if this introduces any other issues). Discovered and fixed by Sebastien Lorquet after much consternation. 2014-12-08 09:51:52 -06:00
Gregory Nutt
e333132280 SAMA5D3 Xplained: Add support for the Itead Joystick shield 2014-12-03 12:24:23 -06:00
Gregory Nutt
6d7106424e STM32: Add MCO configuration for the STM32L1xx. From Jussi Kivilinna 2014-12-02 10:19:37 -06:00
Gregory Nutt
13de352dcd STM32L15: Fix typo in MCO pin definition. From Jussi Kivilinna 2014-12-02 10:18:02 -06:00
Gregory Nutt
f94052de26 Update comments 2014-11-29 15:28:28 -06:00
Gregory Nutt
eace825e3b STM32 F4 I2C: Port Tridge's I2C noise resiliance logic from the PX4 repository. 2014-11-29 13:37:45 -06:00
Gregory Nutt
0d50608eae Fix one warning. There are a couple of others that look like real problems 2014-11-28 11:49:24 -06:00
Gregory Nutt
70f778c02b EFM32 Serial: Add support for termios TCGET and TCSET. For the moment, only set/get speed is implemetned. From Pierre-noel Bouteville 2014-11-27 19:14:10 -06:00
Gregory Nutt
3d55cd82ee Forgot too add file before last commit 2014-11-27 06:14:09 -06:00
Gregory Nutt
0ad88d9664 Enable support for STM32F102. https://github.com/PX4/NuttX/pull/28.diff 2014-11-27 06:12:35 -06:00
Gregory Nutt
4f22093bfa Initial support for the LPC4357-EVB provided by Toby Duckworth 2014-11-26 15:18:24 -06:00
Gregory Nutt
2c1f018e85 More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs. 2014-11-25 13:15:09 -06:00
Gregory Nutt
727a7c9e40 Fixes for more issues found by cppcheck 2014-11-24 17:00:26 -06:00
Gregory Nutt
697b0f8f19 More bugs/warnings found by cppcheck 2014-11-24 13:24:51 -06:00
Gregory Nutt
8becf3c18c Various issues/bugs detected by cppcheck 2014-11-24 12:59:52 -06:00
Gregory Nutt
7dfb945979 I2C header file for the Freescale KL family. From Alan Carvalho de Assis. 2014-11-23 16:49:00 -06:00
Gregory Nutt
f548a10c6b SAMA5D3 Xplained: Add an apps/examples/bridge configuration 2014-11-20 16:24:30 -06:00
Gregory Nutt
184ebdf191 STM32 F4 OTGHS device controller driver from Brennan Ashton 2014-11-20 07:19:04 -06:00
Gregory Nutt
7ab214d811 SAM EMAC: Fix typo in the check for successfull allocation of a timer 2014-11-18 14:20:31 -06:00
Gregory Nutt
7dd183fa50 SAMA5D4-EK EMAC1: Correct name of EMAC1 configuration variable 2014-11-18 11:02:22 -06:00
Gregory Nutt
62e94bc883 Cosmetic fixes to comments 2014-11-18 07:19:10 -06:00
Gregory Nutt
f4736a2042 Update ChangeLog 2014-11-17 12:48:01 -06:00
Gregory Nutt
2330c9c842 Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers 2014-11-16 08:10:06 -06:00
Gregory Nutt
da160bfee9 EFM32 USART setup: Computation of BAUD includes shift; Eliminate additional shift. From Pierre-noel Bouteville 2014-11-16 07:57:57 -06:00
Gregory Nutt
83e5ee1c04 SAM3/4: Add missing SPI0 clock configuartion macro for the SAM4S 2014-11-16 06:43:08 -06:00
Gregory Nutt
f4e947ee80 Remove use of NET_LL_HDRLEN from Ethernet drivers. Use ETH_HDRLEN instead 2014-11-15 09:05:34 -06:00
Gregory Nutt
bf984b2b3a Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
025e36ba8c Cosmetic updates; updates to README 2014-11-14 09:54:00 -06:00
Gregory Nutt
a451f3b99e EFM32: Finishes USB naming fixup. Still some missing initialization logic 2014-11-14 08:36:18 -06:00
Gregory Nutt
3a4e126f2d EFM32: More USB naming updates. Still not finished 2014-11-14 07:20:13 -06:00
Gregory Nutt
d667b9072a EFM32: More USB register name corrections. Still incomplete 2014-11-13 12:25:42 -06:00
Gregory Nutt
299b4db5de EFM32: Finishes USB naming changes for device 2014-11-13 10:45:47 -06:00
Gregory Nutt
e69e2767ad Correct a typo in the STM32 OTGFS register bit definitions 2014-11-13 10:43:54 -06:00
Gregory Nutt
312cb6ffa0 EFM32: Tweaks to get EFM32GG-STK3700 running NSH over LEUART0 2014-11-12 12:50:09 -06:00
Gregory Nutt
e424ddbabd EFM32: More USB register name corrections. Still incomplete 2014-11-12 10:43:29 -06:00
Gregory Nutt
365afd95a6 EFM32: More USB register name corrections. Still incomplete 2014-11-12 09:46:58 -06:00
Gregory Nutt
f4be851b0e Remove the definition of INT_FAST32_MIN which is already defined in stdint.h (the correct location). From Lorenz Meier. 2014-11-12 07:47:37 -06:00
Gregory Nutt
123baad163 Add protection from C++ name mangling in the ARM up_internal.h. From Lorenz Meier. 2014-11-12 07:27:28 -06:00
Gregory Nutt
dc16ffe11a Fix a typo in an I2C header file. From Jahu Niskanen 2014-11-11 07:12:16 -06:00
Gregory Nutt
c65372b80c Support for the STM32F103RG. From Murilo Ponte 2014-11-10 07:48:46 -06:00
Gregory Nutt
089124ef8a EFM32: Reduce writes to the CTRL register 2014-11-09 09:43:43 -06:00
Gregory Nutt
6ea107784d EFM32: Fix issues associated with SPI bi order. From Pierre 2014-11-09 08:21:38 -06:00
Gregory Nutt
b96654347b EFM32: Fix typo in connecting ODD GPIO interrupt. Noted by Pierre 2014-11-08 06:18:21 -06:00
Gregory Nutt
ceffd2f121 EFM32 USB: More naming fixes... still does not compile 2014-11-05 14:22:12 -06:00
Gregory Nutt
a2a2af526f EFM32 USB: A few more naming conversions... still a long way to go 2014-11-04 11:48:41 -06:00
Gregory Nutt
d8bfd5a4d2 EFM32: Port USB device and host drivers from STM32. Still does not compile 2014-11-04 10:14:04 -06:00
Gregory Nutt
88dc7b3b3c EFM32: Add USB build support 2014-11-04 06:47:14 -06:00
Gregory Nutt
9051ffd638 STM32GG Starter Kit: Add basic NSH configuration 2014-11-03 16:58:22 -06:00
Gregory Nutt
493ba46ec6 Fix typo is SAM4E pinmap file 2014-11-03 11:59:53 -06:00
Gregory Nutt
811d557053 EFM32 ROM table header files 2014-11-01 13:27:36 -06:00
Gregory Nutt
3189a1acc7 EFM32: Add LESENSE header file 2014-11-01 12:56:55 -06:00
Gregory Nutt
458992ca5b EFM32: Add USB header file 2014-11-01 11:57:11 -06:00
Gregory Nutt
0f754bd6d7 Add optional timestamp to syslog output. From pn_bouteville@yahoo.fr 2014-11-01 09:17:34 -06:00
Gregory Nutt
3d2a34045b Remove carriage returns 2014-11-01 08:06:50 -06:00
Gregory Nutt
918a74805c ARMv7-M: ETM header file 2014-11-01 08:06:06 -06:00
Gregory Nutt
442c646955 EFTM32 ITM: Add missing ~ in bit clear operation. From pn_bouteville@yahoo.fr 2014-11-01 06:51:14 -06:00
Gregory Nutt
0f59ab369a EFM32: Add LCD header file 2014-10-31 20:25:37 -06:00
Gregory Nutt
a36bb77e05 EFM32: Add DAC header file 2014-10-31 20:05:47 -06:00
Gregory Nutt
7f3bd970d7 EFM32: Add BURTC header file 2014-10-31 13:05:00 -06:00
Gregory Nutt
61300aa12e EFM32: Add PRS signals 2014-10-31 12:30:01 -06:00
Gregory Nutt
a9fb2f78b5 EFM32: Add ADC heder file 2014-10-31 12:22:45 -06:00
Gregory Nutt
54af514ef6 EFM32: Add I2C header file 2014-10-31 12:07:57 -06:00
Gregory Nutt
ecd84c7844 EFM32: Add PRS header file 2014-10-31 11:47:40 -06:00
Gregory Nutt
4660eb6e1f EFM32: Add PCNT header file 2014-10-31 11:34:00 -06:00
Gregory Nutt
acf5cbb3dc EFM32: Add RMU header file 2014-10-31 11:17:12 -06:00
Gregory Nutt
afdf44e3c6 EFM32: Add EMU header file 2014-10-31 10:56:15 -06:00
Gregory Nutt
16c1eb924a EFM32: Add VCMP header file 2014-10-31 10:41:28 -06:00
Gregory Nutt
f4fd24acb7 EFM32: Add RTC header file 2014-10-31 10:27:52 -06:00
Gregory Nutt
b984a7c9c0 EFM32: Add AES header file 2014-10-31 10:17:48 -06:00
Gregory Nutt
f081a9ccf5 EFM32: Add watchdog header file 2014-10-31 10:02:37 -06:00
Gregory Nutt
7e661442ed EFM32: Add LETIMER header file 2014-10-31 09:54:26 -06:00
Gregory Nutt
c25f0062ce EFM32: Add ACMP header file 2014-10-31 09:38:21 -06:00
Gregory Nutt
16c9292c3e EFM32: Add timer header file 2014-10-31 09:27:15 -06:00
Gregory Nutt
6313e5dcb3 EFM32: Changes picked up from Pierre's repository 2014-10-30 18:01:46 -06:00
Gregory Nutt
0eaa74962c Costmetic changes -- spacing, comments. 2014-10-30 16:33:40 -06:00
Gregory Nutt
05c1d9707d SAM3/4: Fix error serial TERMIOS ioctl handling 2014-10-30 12:23:15 -06:00
Gregory Nutt
11ab9c908e Add support for SAM3/4 basic TERMIOS and flow control. There are issues with IFLOW control: PDC or DMAC support is required 2014-10-29 15:47:15 -06:00
Gregory Nutt
692f63e3ee EFM32: In order to use LEUART, LE clocking must be enabled 2014-10-29 11:20:54 -06:00
Gregory Nutt
4ec43d1002 EFM32: Various fixes for LEUART build 2014-10-29 09:37:39 -06:00
Gregory Nutt
2ea73f760c EFM32: Minor serial interrupt mask change; Add LEUART0 board support 2014-10-29 08:04:29 -06:00
Gregory Nutt
7e697f2369 EFM32: Implement HFPERCLK logic 2014-10-28 19:46:45 -06:00
Gregory Nutt
b13b80e35f Fix a few more EFM32 integration bugs 2014-10-28 19:02:21 -06:00
Gregory Nutt
4098d8c4a2 SAM4: Fix a usbnsh build problem that has crept into all serial drivers 2014-10-28 15:44:47 -06:00
Gregory Nutt
7edef0f970 EFM32: Need to configure UART GPIOs as outputs 2014-10-28 14:50:15 -06:00
Gregory Nutt
28ac9e5841 Oops... fix an error in an assertion of last commit 2014-10-28 12:42:19 -06:00
Gregory Nutt
77a622da0b EFM32: Add missing shift of register value 2014-10-28 12:36:47 -06:00
Gregory Nutt
5ab16ee550 EFM32: Fix GPIO configuration logic; Add missing board initializatin logic; Fix LED naming 2014-10-28 10:39:57 -06:00
Gregory Nutt
1e6524cac8 EFM32G: Fix typo in memory map header file 2014-10-28 09:26:06 -06:00
Gregory Nutt
103e5dc791 SAM4E: Fix error TC header file 2014-10-28 09:22:37 -06:00
Gregory Nutt
3805a31473 EFM32: Correct a typo in LFXO bit in clock configuration 2014-10-28 08:59:27 -06:00
Gregory Nutt
027b7c5983 EFM32: Update a configuration; Compile fix for when DEBUG is enabled 2014-10-28 07:24:04 -06:00
Gregory Nutt
5ebc472f43 STM32 Serial: Don't compile up_earlyserialinit() if USE_EARLYSERIALINIT is not define. Otherwise, a macro definition clobbers the function definition 2014-10-28 06:58:37 -06:00
Gregory Nutt
60d2547cd7 Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS 2014-10-27 11:31:16 -06:00
Gregory Nutt
1252286845 Cosmetic... removed checks for non-existent configuration setting 2014-10-27 09:05:52 -06:00
Gregory Nutt
fe6f857f13 Cosmetic changes 2014-10-27 07:57:12 -06:00
Gregory Nutt
818f4c8675 EFM32 SPI: setfrequency() needs to return actual frequency; simplify nbits usages by removing conditional logic 2014-10-27 07:07:30 -06:00
Gregory Nutt
a6f70a00a9 EFM32 SPI: Add check to make sure that the SPI RX buffer is empty before starting a transfer 2014-10-26 13:13:53 -06:00
Gregory Nutt
82bf0558e1 EFM32 SPI: Change some logic that I fear could cause RX data overrun 2014-10-26 12:53:26 -06:00
Gregory Nutt
0100d0f6c0 EFM32: Cosmetic changes to comments and format 2014-10-26 12:48:47 -06:00
Gregory Nutt
5c03174fe4 Cosmetic update to spacing and comments 2014-10-26 11:25:47 -06:00
Gregory Nutt
30946beaf0 EFM32: Integrate SPI DMA capability 2014-10-26 11:22:16 -06:00
Gregory Nutt
cd004832d1 EFM32: Integrate Pierre's SPI driver 2014-10-26 09:27:55 -06:00
Gregory Nutt
2c85b0e85f Remove unnecessary header file inclusion 2014-10-26 06:09:20 -06:00
Gregory Nutt
0f9139f2e9 EFM32: dma_config_t needs to be only 16-bits for now 2014-10-25 17:53:29 -06:00
Gregory Nutt
8dbef3ea4c EFM32 DMA: Cosmetic changes to debug instrumentatin and comments 2014-10-25 17:43:56 -06:00
Gregory Nutt
4b4fc79257 EFM32: Fix misconception in DMA control descriptor alignment 2014-10-25 17:21:58 -06:00
Gregory Nutt
556751bb7a EFM32: More fixes to DMA descriptor table logic 2014-10-25 17:15:16 -06:00
Gregory Nutt
042963cb54 Add debug assertion 2014-10-25 15:29:23 -06:00
Gregory Nutt
04d732dbab EFM32: Correct handling of DMA descriptors; Add initialization of DMA CTRLBASE 2014-10-25 14:55:02 -06:00
Gregory Nutt
ca202adadb EFM32: Completes very basic DMA support. Needs review. Untested 2014-10-25 11:31:13 -06:00
Gregory Nutt
8c875f992f Dangle whitespace removal 2014-10-25 10:35:29 -06:00
Gregory Nutt
2bc74db84b EFM32: A little more DMA logic. Still incomplete 2014-10-25 10:34:07 -06:00
Gregory Nutt
7a845e82de Add some logic to EFM32 DMA module. Still incomplete 2014-10-25 08:09:19 -06:00
Gregory Nutt
800826ac64 Add framework for EFM32 DMA support -- no logic in place yet 2014-10-24 17:59:13 -06:00
Gregory Nutt
002fa55c04 Fix some typos that I just introduced... Sometimes I can't do anything right 2014-10-24 17:58:33 -06:00
Gregory Nutt
4d393f3801 Update EFM32 DMA header file for Gecko support 2014-10-24 16:58:38 -06:00
Gregory Nutt
1a532c1744 SAM4E-EK: Add support for PHY insterrupt 2014-10-24 12:28:57 -06:00
Gregory Nutt
2e829a5ff8 Another fix to SAM3/4 GPIO IRQ issue 2014-10-24 10:55:52 -06:00
Gregory Nutt
96405b1913 SAM3/4: Fix conditional compilation in GPIO IRQ logic 2014-10-24 10:44:43 -06:00
Gregory Nutt
8dfb3a1dd0 SAM4E: Fix options to select GPIO interrupts in Kconfig 2014-10-24 09:29:01 -06:00
Gregory Nutt
d87cc50b31 Add EFM32 DMA header file 2014-10-24 07:57:16 -06:00
Gregory Nutt
e242f945ba Another typo in EMF32 GPIO logic 2014-10-23 19:19:58 -06:00
Gregory Nutt
687a28cc09 Fix compiler errors in up_itm_syslog.c. From Pierre-Noel Bouteville 2014-10-23 18:30:32 -06:00
Gregory Nutt
d342fbfb0c Fix file naming: arm_item_syslog.c changed to up_itm_syslog.c. From Pierre-Noel Bouteville 2014-10-23 18:25:05 -06:00
Gregory Nutt
afeb7a46e2 EFM32 port and pin decoding backward in every case. From Pierre-Noel Bouteville 2014-10-23 18:16:57 -06:00
Gregory Nutt
cfd344c1a6 Oops last changes still in editor 2014-10-23 10:13:32 -06:00
Gregory Nutt
eaa0b18c18 EFM32: Add configuration option to use USARTs as SPI 2014-10-23 08:54:26 -06:00
Gregory Nutt
113483a177 EFM32: Add configuration option to use USARTs as SPI 2014-10-23 08:25:37 -06:00
Gregory Nutt
cc0a5d6004 Update to the LPC43xx RIT/Tickless code. From Brandon Warhurst 2014-10-23 07:14:37 -06:00
Gregory Nutt
c10f826ae3 Add support for tickless operation using the NXP LPC43xx 2014-10-23 06:54:24 -06:00
Gregory Nutt
df2abd3efc EFM32: Add logic to initialize and use ITM system 2014-10-22 09:05:22 -06:00
Gregory Nutt
9878205b1c Remove whitespace and and carriage returns 2014-10-22 09:04:40 -06:00
Gregory Nutt
d36bb47210 ARMv7: Add support to use ITM for SYSLOG debug output 2014-10-22 09:03:00 -06:00
Gregory Nutt
98c904d694 Eliminate a warning 2014-10-22 07:56:48 -06:00
Gregory Nutt
2763da5ddd EFM32: Add IDLE power management hooks. Nothing implemented; just define the hooks 2014-10-22 07:26:31 -06:00
Gregory Nutt
f06890c931 Add ARMv7-M DWT and TPI register definitions 2014-10-21 16:46:26 -06:00
Gregory Nutt
c447bb7537 Add CMSIS ITM header file and library 2014-10-21 16:16:00 -06:00
Gregory Nutt
3591729d17 EFM32: Add buton interrupt handling for the Olimex board 2014-10-21 13:51:30 -06:00
Gregory Nutt
b965c7e8f4 The olimex-efm32g880f128-stk now defaults to use LEUART1 as the serial console. Also fixes lots of compile bugs from the original LEUART checkin 2014-10-21 11:38:51 -06:00
Gregory Nutt
e7fe3882a6 EFM32: Add LFA and LFB clock support 2014-10-21 10:45:33 -06:00
Gregory Nutt
6cf07c2a0e EFM32: Add configuration support for LEUARTs 2014-10-21 09:37:02 -06:00
Gregory Nutt
1640ee9108 EFM32: Add a LEUART-based serial driver (untestee) 2014-10-21 09:21:03 -06:00
Gregory Nutt
58f6b696f6 EFM32: Add basic, low-level support for the low energy UARTs 2014-10-21 08:48:38 -06:00
Gregory Nutt
994dbda075 EFM32: Addred LEUART register definition header file 2014-10-21 08:11:03 -06:00
Gregory Nutt
94270a0229 Add ADC pinmap definitions for the STM32 F103R from Lederhilger Martin 2014-10-21 06:48:16 -06:00
Gregory Nutt
23db8a44c3 Fixe to allow compile of lpc43_gpioint.c. It likely doesn't work. From Brandon warhurst_002 2014-10-21 06:36:27 -06:00
Gregory Nutt
d2cf8395f9 stm32: rename spi frame format definition 
This renames the stm32 spi frame format definition to the short description
name as well as the other cr2 register flags.

Note! STM32_SPI3_FRF was never used by nuttx somewhere

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:12:59 -06:00
Gregory Nutt
ebf9bce9d8 EFM32: Another update to USART oversampling calculation. Clip to positive; update comments 2014-10-20 13:54:43 -06:00
Gregory Nutt
1a77fbcaca Fix some naming 2014-10-20 12:29:28 -06:00
Gregory Nutt
260238aa8a EFM32 USART: Fix oversampling selection; Should be biased toward higher oversampling rates 2014-10-20 10:54:13 -06:00
Gregory Nutt
75b728498a Finsh USART configuration logic 2014-10-20 08:12:08 -06:00
Gregory Nutt
956fc38fca Add GPIO interrupt logic 2014-10-20 08:12:08 -06:00
Gregory Nutt
33a12dfb84 Trivial, cosmetic typos in comments 2014-10-20 08:12:07 -06:00
Gregory Nutt
1524c67a17 Add EFM32 serial driver 2014-10-19 18:55:44 -06:00
Gregory Nutt
74db6df61f Add some UART configuration logic (still incomplete) 2014-10-19 16:42:15 -06:00
Gregory Nutt
df85772cea Fleshes out GPIO configuration logic 2014-10-19 13:47:52 -06:00
Gregory Nutt
2a7edd7e1c Add GPIO header file + a little bit of GPIO configuration logig 2014-10-19 13:07:52 -06:00
Gregory Nutt
3896f187a6 Basic clock configuration logic 2014-10-19 11:08:56 -06:00
Gregory Nutt
06ac7e3a6f Add MSC header file 2014-10-19 09:59:40 -06:00
Gregory Nutt
f0b13590ac Fix conditional logic in CMU header file 2014-10-19 06:46:35 -06:00
Gregory Nutt
8155730f28 Add frame for EFM32 GPIO logic (empty functions) 2014-10-18 18:40:08 -06:00
Gregory Nutt
ebc8333a0b Fix some incorrect conditional logic 2014-10-18 16:16:57 -06:00
Gregory Nutt
a011c250da Add skeleton lowputc() file for EFM32 2014-10-18 16:16:48 -06:00
Gregory Nutt
4f0b8da33c Add skeleton lowputc() file for EFM32 2014-10-18 16:16:22 -06:00
Gregory Nutt
6b1e87a848 Add EFM32 configuration header file 2014-10-18 16:15:53 -06:00
Gregory Nutt
ae3e75a5aa efm32_vectors.S is not really a HEAD object 2014-10-18 15:32:56 -06:00
Gregory Nutt
9069fc797a Add EFM32 SysTick timer support 2014-10-18 15:27:36 -06:00
Gregory Nutt
de5c451a30 Add empty file for event EFM32 clock configuration logic 2014-10-18 15:22:11 -06:00
Gregory Nutt
1bfec65ac5 More framework for GPIO interrupt support 2014-10-18 14:05:07 -06:00
Gregory Nutt
8d73e56145 Use UART0 for the serial console 2014-10-18 12:47:45 -06:00
Gregory Nutt
21d906db0b Add EFM32 UART/USART header file 2014-10-18 11:13:03 -06:00
Gregory Nutt
c071687ae5 Oops committed the wrong version 2014-10-18 09:46:35 -06:00
Gregory Nutt
6d5c75c2ff Add EFM32 CMU header file 2014-10-18 09:26:56 -06:00
Gregory Nutt
686a29624c Add EFM32 Memory Maps 2014-10-17 16:43:52 -06:00
Gregory Nutt
17399091ed Add GPIO header file and EFM32 Gecko Starter Kit LED support 2014-10-17 14:17:44 -06:00
Gregory Nutt
8eb85ce1f8 More EFM32 files 2014-10-17 12:31:44 -06:00
Gregory Nutt
a45de60aca More EFM32 files and logic 2014-10-17 12:02:32 -06:00
Gregory Nutt
2bafdf3d59 Add EFM32 interrupt vector defintions 2014-10-17 10:34:39 -06:00
Gregory Nutt
895cfe0e7c Add configuration support for the EFM32 Gecko Starter Kit 2014-10-17 09:25:52 -06:00
Gregory Nutt
0aea891272 Enable selection of SPI2 for STM32L15XX in Kconfig. From Jussi Kivilinna 2014-10-16 07:03:23 -06:00
Gregory Nutt
26b42e3f57 Minor update to last Kconfig change 2014-10-15 12:33:37 -06:00
Gregory Nutt
e73b64f5ea Add Kconfig selections for STM32-F4x1RE SPI peripheral 2014-10-15 12:22:04 -06:00
Gregory Nutt
a835387529 Fix file mode on modified files 2014-10-14 15:45:56 -06:00
Gregory Nutt
56841b9e20 Support for the STM32 F411RE from Serg Podtynnyi 2014-10-14 15:42:28 -06:00
Gregory Nutt
7012d13e95 Cosmetic changes to comments 2014-10-10 16:54:47 -06:00
Gregory Nutt
85c75a39b0 Fix a few typos 2014-10-10 11:41:40 -06:00
Gregory Nutt
abc90f0e50 Fix watchdog stop bit usage. From Lazlo 2014-10-10 11:36:50 -06:00
Gregory Nutt
385ac926b6 Fix a typo in the lpc43 makefile, lpc43_usb0dev not lpc31_usb0dev 2014-10-09 17:59:42 -06:00