This change improves upon current support for pin interrupts. Before,
a pin interrupt was handled (with nrf52_gpiote_setevent) using one
of the eight available GPIOTE channels. Moreover, it didn't event let
the user specify which channel to use (simply tried to get a free one).
Also, it was buggy since it did not consider unsetting the callback.
Besides GPIOTE channels, there is another way to deal with pin interrupts.
The GPIO peripheral is capable of generating a PORT event
(for the whole GPIO port) depending on the pin SENSE configuration
(HIGH or LOW, or NONE) and GPIO DETECTMODE register
(latching or non-latching).
This change then renames nrf52_gpiote_setevent into nrf52_gpiote_set_ch_event,
maintaining functionality of original function, but now allows specifying
channel (and correctly handles unsetting the callback). Then, a
new nrf52_gpiote_set_pin_event is added, which allows to set a callback
for a given pin. During initialization, interrupt for the PORT event is
enabled and handled in such way that for each pin whose corresponding
bit in LATCH register (indicates the result of pin SENSEing) the
callback for this pin will be invoked. This mechanism means that
every pin can get an ISR. It also avoids using GPIOTE channels for this
purpose which carry higher current consumption.
This new per-pin callback mechanism has some added memory requirement
so it can be disabled and its default is dependant on DEFAULT_SMALL.
When disabled, a callback for the PORT event can be set directly
with nrf52_gpiote_set_port_event
There was only one use of nrf52_gpio_setevent() which was migrated
into nrf52_gpio_set_ch_event() passing channel zero.
arch/arm/src/tiva/hardware/cc13x2_cc26x2/cc13x2_cc26x2_flash.h:
* Merge comments when they are section separators for
similar/related registers:
- TIVA_FLASH_FWPWRITE*
- TIVA_FLASH_FSM_SECTOR1*
- TIVA_FLASH_FSM_BSLE*
- TIVA_FLASH_FSM_BSLP*
When HAVE_HSI_CONTROL, adc_reset_hsi_disable() calls adc_reset()
followed by adc_shutdown() and this combination is called before
adc_setup() by upper level ADC driver. Without this patch,
priv->initialized wraps from 0 to 255 in this case.
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
arch/arm/src/tiva/hardware/cc13x2_cc26x2/cc13x2_cc26x2_adi3_refsys.h:
* Fix syntax error. The define ADI3_REFSYS_DCDCCTL0_VDDR_TRIM_MIN
had an unintentional comment closing "*/" in the middle of its
name.
This separation allows to interact with the watchdog from OS code,
for example initiating the watchdog very early on boot. Moreover,
these changes make the lower-half driver support an already running
watchdog, which may happen if there's a bootloader which already
started it.
Summary:
- This commit fixes kernel stack dump information
Impact:
- Affects armv7-a with kernel build
Testing:
- Built with sama5d4-ek:knsh
- Not tested
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Apply the same logic for armv7-m
- NOTE: stack pointer alignment is 4-byte
Impact:
- Affects armv6-m with interrupt stack enabled
Testing:
- Built with freedom-kl25z:nsh (CONFIG_ARCH_INTERRUPTSTACK=2048)
- Not tested but should work
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Apply the same logic for armv7-m
- NOTE: stack pointer alignment is 8-byte
Impact:
- Affects armv8-m with interrupt stack enabled
Testing:
- Not tested but should work
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Apply the same logic for armv7-a
- NOTE: stack pointer alignment is 8-byte
Impact:
- Affects armv7-r with interrupt stack enabled
Testing:
- Not tested but should work
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Apply the same logic for armv7-a
- NOTE: stack pointer alignment is 4-byte
Impact:
- Affects arm (arm7/9) and c5471 with interrupt stack enabled
Testing:
- Built with c5471evm.nsh (CONFIG_ARCH_INTERRUPTSTACK=2048)
- Built with ea3131:nsh (CONFIG_ARCH_INTERRUPTSTACK=2048)
- Not tested but should work
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Remove -4/-8 offset coding in imx_irq.c and arm_vectors.S
- Instead, add SP adjustment after calling setirqstack/setfiqstack
- Fix off-by-one irq/fiq stack allocation in 8-byte aligned arch
- Fix comments on the user stack pointer in arm_vectors.S
- Also, fix up_dumpstate() to extract the user stack pointer
- NOTE: stack pointer alignment is 8-byte
Impact:
- Affects armv7-a with interrupt stack enabled
Testing:
- Tested with sabre-6quad:smp with QEMU
- Tested with sabre-6quad:nsh with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit fixes CPUx IDLE stack top for SMP
- Also removes SMP_STACK_TOP from smp.h
Impact:
- Affects armv7-a SMP only
Testing:
- Tested with sabre-6quad:smp (QEMU)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
There is a good case on sim platform:
When we input some cmd and click enter key to start application in terminal,
this context will change to application from IDLE loop. Althrough entey key '\r'
has been received to recv buffer and complete post semaphore of reader, but
pollnotify may not be called because context change. So when application run
poll function, because no events happend and poll enter wait, context will
again change to IDLE loop, this pollnotify of IDLE loop will run to send poll
events, poll function of applicaton will wake up. It's wrong!
Change-Id: I812a889f2e90781a9c3cb4b0251cccc4d32bebd1
Signed-off-by: dongjiuzhu <dongjiuzhu1@xiaomi.com>
Summary:
- Modify arm_intstack_base() to return "top" of the IRQ stack for the current CPU
- This change fixes IRQ stack dump information for ARM SMP
- Add arm_intstack_alloc() to return "bottom" of the IRQ stack for the current CPU
- Also, these functions are now implemented in xxx_irq.c (imx/cxd56/lc823450)
- up_color_intstack() and up_check_intstack() now call arm_intstack_alloc()
- These semantics are now consistent with non-SMP case
- up_color_intstack() now initializes whole IRQ stack region for SMP
- Adjust IRQ stack top address for each CPU (e.g. -8)
- Fix setintstack to handle in case of NCPUS=1 (cxd56, lc823450)
- Adjust INTSTACK_SIZE to 8 bytes alignment (cxd56, lc823450)
- Refactor setintstack for lc823450
- Remove old IRQ stack coloring code from up_irqinitialize() (lc823450)
- Introduce g_cpu_intstack_top for lc823450
- Refactor header files
Impact:
- Affects imx6/cxd56xx/lc823450 SMP with interrupt stack enabled
Testing:
- Tested with sabre-6quad:smp (with QEMU, NCPUS=1 and 4)
- Tested with spresense:wifi_smp (NCPUS=1 and 2)
- Tested with lc823450-xgevk:rndis (NCPUS=1 and 2)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
cfsetispeed() now stores baud rate to c_cflag member of
struct termios, so it must not be overridden later on.
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
1.Get the stack pointer from sp instead of .Lstkinit's field
2.Make g_idle_topstack point to the end of the idle stack
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
arch/arm/src/tiva/cc13xx/cc13x0_rom.h,
arch/arm/src/tiva/cc13xx/cc13x2_cc26x2_v2_rom.h:
* Fix nxstyle errors; nxstyle was complaining about lack of a
space after comma because of the presence of line
continuation backslashes immediately after the comma.
Removed these backslashes as they are not necessary: these
lines are typedefs, not preprocessor defines.
arch/arm/src/tiva/cc13xx/cc13x2_v2_trim.c:
* Fix nxstyle errors.
* No functional changes; however modified one function,
trim_wakeup_fromshutdown(), to avoid blocks that existed
only to declare variables mid-function; nxstyle was
complaining about the positions of the opening and
closing braces of those blocks.
Summary:
- During Wi-Fi audio streaming test, I noticed data corruption in tcb
- Finally, I found an issue in IRQ request handing with IPI
- This commit fixes this issue
Impact:
- Affects SMP only
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds interrupt stack for SMP
Impact:
- Affects SMP only
Testing:
- Tested with spresense:wifi_smp with CONFIG_ARCH_INTERRUPTSTACK=2048
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
