Gregory Nutt
c80559c6b1
ILI9488: Correct logic that gets the LCD ID
2015-04-04 10:02:31 -06:00
Gregory Nutt
c1491b40f4
SAMV17-XULT: Can't use UART3 when LCD is conencted, switch to USART0
2015-04-04 08:43:41 -06:00
Gregory Nutt
c513469300
Fix typos in debug assertions
2015-04-04 06:59:14 -06:00
Gregory Nutt
d23a091ec3
More updates to README file
2015-04-03 20:12:30 -06:00
Gregory Nutt
d82a1083fc
SAMV71-XULT: The ILI9488 LCD is now enabled by default in the mxtxplnd configuration
2015-04-03 20:11:39 -06:00
Gregory Nutt
7e98a22aa6
SAMV71-XULT ILI9488 LCD driver is code complete but untested
2015-04-03 16:36:58 -06:00
Gregory Nutt
91bfe1f807
SAMV7: Add SMC register definition header file; SAMV71-Xult: Add an LCD driver. The initial commit is simply the SAVM4E-EK ILI9375 driver will bogus name changes to ILI9488.
2015-04-03 10:28:32 -06:00
Gregory Nutt
163626647a
SAMV7: Fixes to WM8904 build
2015-04-02 18:24:55 -06:00
Gregory Nutt
fd37fff1e7
Add a very basic driver for the CS2100-CP Fractional-N Multipler chip.
2015-04-02 13:00:10 -06:00
Gregory Nutt
15409a1ba6
SAMV7 WM8904: Leverage WM8904 logic from the SAMA5D4-EK
2015-04-01 12:13:51 -06:00
Gregory Nutt
fdfe38ea0d
rch_tcinitialize() and arch_tcunitinitialize() renamed to board_tsc_setup() and board_tsc_teardown(). These are not long called directly by applications but only indirectly throught the crappy boardctl() OS interface.
2015-03-31 13:21:25 -06:00
Gregory Nutt
15b90de919
NSH initialization now calls boardctl(BOARDIOC_INIT) instead of board_app_initaliaze. Modify all configurations: Make sure that CONFIG_LIB_BOARDCTL=y appears wherever CONFIG_NSH_ARCHINIT=y appears. Remove support for CONFIG_NSH_ARCHMAC. It is not used and there are better ways to do that operation
2015-03-31 12:14:16 -06:00
Gregory Nutt
103a17d4f1
Rename arch_nshinitialize() to board_app_initialize()
2015-03-31 10:21:31 -06:00
Gregory Nutt
7b3761f4ea
SAMV71-XULT: Add option to support connection of the maXTouch Xplained Pro on the 50-pin LCD connector
2015-03-31 09:01:38 -06:00
Gregory Nutt
519e00eba7
SAMV71-XULT: Add a configuration for testing the maXTouch Xplained Pro connected to the board
2015-03-30 15:31:53 -06:00
Gregory Nutt
9057fe2051
Update README
2015-03-30 07:33:48 -06:00
Gregory Nutt
55a7065f07
Cortex-M7: Add support for enabled the D-Cache in write only mode.
...
SAMV7 Ethernet: I- and D-Cache are now enabled in the netnsh/ configuration. D-Cache is enabled in write-though mode. This mode is necessary because the DMA descriptors are each 8-bytes in size but the D-Cache cache line is 32-bits in size. So it is impossible make coherency for every 8-byte DMA descriptor without write-through.
2015-03-29 14:42:03 -06:00
Gregory Nutt
7a636fdb13
SAMV7/Cortex-M7: Add support for write through D-Cache. SAMV7 Ethernet look like it needs this
2015-03-29 13:09:22 -06:00
Gregory Nutt
d85f3dd530
Minor update to a README
2015-03-29 07:04:39 -06:00
Gregory Nutt
9b906daa86
SAMV71-XULT: netnsh configuration is back to -O2
2015-03-28 14:54:30 -06:00
Gregory Nutt
3a93955fb3
SAMV7 EMAC: Fix alignment issue: RX buffers need to be invalidated. This means the alignment of buffers must be at least to the data cache line size at both ends of the buffer
2015-03-28 13:09:01 -06:00
Gregory Nutt
bbeca4a91c
SAMV7 EMAC: Sometimes TX is not started when TSTART is set??? Workaround seems to be to set it twice. Restored full optimization. Also CONFIG_NET_NOINTS is set so that interrupt level provessing is avoided
2015-03-28 09:42:45 -06:00
Gregory Nutt
2108499b4f
SAMV71-XULT: Add a network-enabled NSH configuration
2015-03-27 14:18:13 -06:00
Gregory Nutt
e57bb047c8
SAMV7 Ethernet: Fix some errors in circular queue handling
2015-03-27 13:04:43 -06:00
Gregory Nutt
3e89b2f8ff
SAMV7 Ethernet+USB Updates
2015-03-27 10:47:03 -06:00
Gregory Nutt
e1e7b63af4
Updated comments/README
2015-03-26 12:33:03 -06:00
Gregory Nutt
8eb9880410
SAMV7 USB: more updates
2015-03-25 15:56:10 -06:00
Gregory Nutt
260f58a289
SAMV7: Add framework for USB DCD. Initial check-in is just the SAMA5 USB DCD with naming changes to get a clean compilation. Needs careful review and comparison with datasheet and, of course, testing
2015-03-23 14:06:53 -06:00
Gregory Nutt
93e2975141
Refresh Configuration
2015-03-20 17:45:10 -06:00
Gregory Nutt
316d60909b
SAMV71-XULT: Add support for a ConfigData device on the 256 AT24 EEPROM
2015-03-19 14:53:05 -06:00
Gregory Nutt
547a2aea5a
SAMV7: Add a sneak internal interface that will allow us to set the MAC address before NSH even starts
2015-03-18 17:23:40 -06:00
Gregory Nutt
8e2c27f4d5
SAMV7: Updates to Ethernet driver based on comparison with Atmel sample code. Add configuration for other PHY GPIOs. Still no Ethernet interrupts
2015-03-18 15:55:00 -06:00
Gregory Nutt
97769595b0
Cosmetic update to README
2015-03-17 17:10:44 -06:00
Gregory Nutt
d3724701b9
SAMV7 Ethernet: Support getting IP address from the XULT AT24 EEPROM
2015-03-17 14:29:41 -06:00
Gregory Nutt
9849e22d3b
SAMV7: Quick'n'dirty port of the SAMA5D4 Ethernet MAC driver to the SAMV7. Still some unresovled issues with DCache handling
2015-03-16 13:51:37 -06:00
Gregory Nutt
471cd8491d
Trivial update to FAT, comments, README
2015-03-15 15:06:17 -06:00
Gregory Nutt
81b8736779
This commit enables HSMCI functionality in the SAMV71-XULT. TX DMA is, unfortunately, currently disabled.
2015-03-15 12:17:39 -06:00
Gregory Nutt
0b4133c064
Update README files
2015-03-15 10:22:14 -06:00
Gregory Nutt
79dbd00f54
SAMV7: Costmetic changes to SDRAM logic
2015-03-14 13:58:34 -06:00
Gregory Nutt
3d34f02168
SAMV7: More SDRAM logic. It does still does not work
2015-03-14 13:27:00 -06:00
Gregory Nutt
93a58ea955
SAMV71-XULT: Add support for SDRAM (unverified)
2015-03-14 11:00:46 -06:00
Gregory Nutt
6c262a4dfb
SAMV7-XULT: Build support for SDRAM (SDRAM init still missing)
2015-03-14 09:16:27 -06:00
Gregory Nutt
f89abc4afa
SAMV71-XULT: Bring HSMCI and auto-mounter support from SAMA5D4-EK
2015-03-13 09:27:16 -06:00
Gregory Nutt
eb6ff69470
SAMV7: Quick'n'dirty port of the SAMA5 HSMCI driver to the SAMV7
2015-03-12 18:03:41 -06:00
Gregory Nutt
7fd9380485
SAMV71: Quick'n'dirty port of the SAMA5 SSC driver to the SAM7. The IP is compatible but there are still some DMA- and Cache-related issues that need to be worked out.
2015-03-12 16:00:38 -06:00
Gregory Nutt
b4f44e9fbb
Minor update to README
2015-03-12 13:43:54 -06:00
Gregory Nutt
7f4959b864
SAMV71-XULT: Enable I2C and the I2C tool in the NSH configuration
2015-03-12 12:27:06 -06:00
Gregory Nutt
26ac9361e7
SAMV7-XULT: Integrate button support and apps/examples/buttons into the NSH configuration
2015-03-11 14:41:58 -06:00
Gregory Nutt
fbee7812f3
Update README
2015-03-11 12:32:00 -06:00
Gregory Nutt
b587ebaed5
SAMV71-XULT: Enable 64-bit floating point support
2015-03-11 12:30:14 -06:00
