Gregory Nutt
|
c88e9538d4
|
SAMA5Dx: Fix a header file naming collision
|
2015-09-29 12:49:24 -06:00 |
|
Stefan Kolb
|
51fb4d3252
|
SAMV7: SPI Slave fixes
|
2015-09-29 09:13:36 -06:00 |
|
Gregory Nutt
|
2a6c71e850
|
Costmetic changes from last merge to better conform to the coding standard
|
2015-09-29 09:06:16 -06:00 |
|
Gregory Nutt
|
daa4d4b422
|
Merged in petekol/arch (pull request #16)
init hw, draft
|
2015-09-29 08:22:23 -06:00 |
|
pkolesnikov
|
e6ab9cc339
|
init hw, draft
|
2015-09-29 15:53:20 +02:00 |
|
Gregory Nutt
|
cd6b51847b
|
SAMV71: Fix SPI compilation errors when SPI DMA is enabled
|
2015-09-29 07:31:21 -06:00 |
|
Gregory Nutt
|
82cc93c71b
|
Add some comments to a Kconfig file
|
2015-09-24 14:53:04 -06:00 |
|
Gregory Nutt
|
50b64f6991
|
Sim target on Cygwin64: Modern Cygwin X86_64 machines follow the Microsoft ABI for parameter passing. The older,inux System 5 ABI will not work on X86_64-based Cygwin machines. With this change, the simulator agains works with the newer Cygwin64 platform
|
2015-09-24 14:41:57 -06:00 |
|
Gregory Nutt
|
569a29a327
|
Simulation: Newer versions of Cygwin tools do not seem to pre-pend symbol names with underscore character
|
2015-09-24 09:08:52 -06:00 |
|
Gregory Nutt
|
473a3cf2a6
|
STM32: Trivial chnages from review of merge
|
2015-09-23 15:00:47 -06:00 |
|
Gregory Nutt
|
f16c3fd763
|
Merged in pnb990/nuttx-kernel-arch (pull request #15)
add swo for stm32F4xxx
|
2015-09-23 14:58:15 -06:00 |
|
Pierre-noel Bouteville
|
53fbd6b4ec
|
Merged nuttx/arch into master
|
2015-09-23 22:52:37 +02:00 |
|
pnb
|
f19c5e883d
|
add swo for stm32F4xxx
|
2015-09-23 22:51:22 +02:00 |
|
Gregory Nutt
|
cbdafb96d5
|
Remove unused function setipsr. Cortex-M IPSR register is not writable
|
2015-09-23 08:38:32 -06:00 |
|
Gregory Nutt
|
a1cbb7d8fb
|
Correct bad cut-and-paste in STM32 F7 stm32_uart.h. Noted by Vlad Chiorean
|
2015-09-22 09:02:06 -06:00 |
|
Gregory Nutt
|
139a31b875
|
stm32f74xx75xx_irq.h: STM32_IRQ_SAI2 is not defined but STM32_IRQ_SAI1 is defined twice. Noted by Vlad Chiorean
|
2015-09-22 07:45:59 -06:00 |
|
Gregory Nutt
|
7a2428819f
|
Minor style: # if pre-processor command should be in columnn 1
|
2015-09-18 12:47:24 -06:00 |
|
Gregory Nutt
|
39859a9645
|
All ARMV7-M: Force 8-byte stack alignment when calling from assembly to C to interrupt handling
|
2015-09-15 07:37:09 -06:00 |
|
Gregory Nutt
|
f7ca98c5ae
|
Fix error in almost all ARMv7-M interrupt stack handling
|
2015-09-14 07:07:13 -06:00 |
|
Gregory Nutt
|
f5d015d8a2
|
Clean up some kruft left in the SAMA5D2 PIO driver
|
2015-09-13 07:25:45 -06:00 |
|
Gregory Nutt
|
a27e673967
|
SAMA5D2: Finish implementtion of the PIO driver
|
2015-09-12 11:36:06 -06:00 |
|
Gregory Nutt
|
ac986987de
|
SAMA5D2: Add PIO driver. Still a work in progress
|
2015-09-12 09:58:18 -06:00 |
|
Gregory Nutt
|
7c62fcbe96
|
Rename sam_pio.c to sama5d53x4x_pio.c
|
2015-09-12 09:14:34 -06:00 |
|
Gregory Nutt
|
114f353224
|
SAMA5D2: Update matrix header file for the SAMA5D2
|
2015-09-12 09:02:42 -06:00 |
|
Gregory Nutt
|
94bdeda28e
|
SAMA5D2: Add PIO register definition header file
|
2015-09-12 08:24:48 -06:00 |
|
Gregory Nutt
|
b8c1f0bfeb
|
SAMA5: Rename chip/sam_pio.h to chip/sama5d3s4x_pio.h
|
2015-09-12 06:49:37 -06:00 |
|
Gregory Nutt
|
1f745e534b
|
SAMA5D2: Make sure that USART mode is selected for each Flexcom used as a serial device
|
2015-09-11 18:42:49 -06:00 |
|
Gregory Nutt
|
36eba6ef99
|
Fix some errors in comments
|
2015-09-11 18:03:40 -06:00 |
|
Gregory Nutt
|
cc0f1d1f04
|
SAMA5D: Ooops. Committed wrong version of RXLP header file
|
2015-09-11 18:01:38 -06:00 |
|
Gregory Nutt
|
7c4428b67e
|
SAMA5D2: Add RXLP register definition header file
|
2015-09-11 16:11:00 -06:00 |
|
Gregory Nutt
|
972ae84d95
|
SAMA5D2: Add logic to enable Flexcom clocking and to configure Flexcom pins
|
2015-09-11 14:54:30 -06:00 |
|
Gregory Nutt
|
b19c3d7cbe
|
SAMA5D2: Add Flexcom UART serial driver
|
2015-09-11 14:30:19 -06:00 |
|
Gregory Nutt
|
9385a98588
|
SAMA5D: Move common configuration logic from sam_lowputc.c and sam_serial.c to new sam_config.h. Make room in the architecture for forthcoming Flexcom USARTs
|
2015-09-11 12:00:30 -06:00 |
|
Gregory Nutt
|
a39b2351f0
|
SAMA5D2: Add Flexcom register definition header files
|
2015-09-11 10:40:12 -06:00 |
|
Gregory Nutt
|
f51541dfd6
|
SAMA5Dx UART: SAMAD4 also has BRSRCCK bit in the MR register
|
2015-09-11 08:27:18 -06:00 |
|
Gregory Nutt
|
9b55b91fea
|
Merged in paulpatience/nuttx-arch (pull request #14)
Fix typo
|
2015-09-11 08:03:04 -06:00 |
|
Paul A. Patience
|
260778feb1
|
Fix typo
|
2015-09-10 21:07:03 -04:00 |
|
Gregory Nutt
|
cf7ea3bc3e
|
Updates for SAMA5D2: It has no USARTS
|
2015-09-10 17:15:52 -06:00 |
|
Gregory Nutt
|
2cdbc17a63
|
SAMA5: Fix support for varying number of PIO ports
|
2015-09-10 13:46:57 -06:00 |
|
Gregory Nutt
|
c1b83cfbc8
|
SAMA5D2: Add pin multiplexing definition file and other necessary changes for the SAMA5D2
|
2015-09-10 13:07:04 -06:00 |
|
Gregory Nutt
|
7ad8c32adf
|
Trivial spacing change
|
2015-09-10 12:11:10 -06:00 |
|
Ilya Averyanov
|
0fea56cd8b
|
LPC43xx: Add ehci driver.
|
2015-09-10 07:23:03 -06:00 |
|
Gregory Nutt
|
87aa1cb83b
|
SAMA5D2: Update PMC definitions; has UART2-4, but not USART0-4
|
2015-09-09 12:11:45 -06:00 |
|
Gregory Nutt
|
c391ada5e7
|
SAMA5D2: Update boot logic, AXIMX, SFR, and WDT register definition files for SAMA5D2
|
2015-09-09 10:00:29 -06:00 |
|
Ilya Averyanov
|
76ab22debf
|
LPC43xx: Fix IRQ Ethernet name
|
2015-09-09 07:22:02 -06:00 |
|
Gregory Nutt
|
5f54db8c17
|
Separate memory mapping tables for SAMA5D2, 3, and 4
|
2015-09-08 16:40:13 -06:00 |
|
Gregory Nutt
|
6e900bc88a
|
Eliminate warning
|
2015-09-08 13:26:51 -06:00 |
|
Gregory Nutt
|
36f1d84374
|
Remove some nonfunctional logic that also generates warnings
|
2015-09-08 13:02:33 -06:00 |
|
Gregory Nutt
|
0f8a416b20
|
More fixes for warning removal typos
|
2015-09-08 12:15:29 -06:00 |
|
Gregory Nutt
|
35866ede44
|
Eliminate warnings
|
2015-09-08 12:02:35 -06:00 |
|