Gregory Nutt
dab3dbc75b
Cortex-M7: Add support for enabled the D-Cache in write only mode.
...
SAMV7 Ethernet: I- and D-Cache are now enabled in the netnsh/ configuration. D-Cache is enabled in write-though mode. This mode is necessary because the DMA descriptors are each 8-bytes in size but the D-Cache cache line is 32-bits in size. So it is impossible make coherency for every 8-byte DMA descriptor without write-through.
2015-03-29 14:42:03 -06:00
Gregory Nutt
9b906daa86
SAMV71-XULT: netnsh configuration is back to -O2
2015-03-28 14:54:30 -06:00
Gregory Nutt
ce34402dac
SAMV71-XULT: netnsh configuration is back to -O2
2015-03-28 14:54:30 -06:00
Gregory Nutt
3a93955fb3
SAMV7 EMAC: Fix alignment issue: RX buffers need to be invalidated. This means the alignment of buffers must be at least to the data cache line size at both ends of the buffer
2015-03-28 13:09:01 -06:00
Gregory Nutt
d2fd139ebc
SAMV7 EMAC: Fix alignment issue: RX buffers need to be invalidated. This means the alignment of buffers must be at least to the data cache line size at both ends of the buffer
2015-03-28 13:09:01 -06:00
Gregory Nutt
bbeca4a91c
SAMV7 EMAC: Sometimes TX is not started when TSTART is set??? Workaround seems to be to set it twice. Restored full optimization. Also CONFIG_NET_NOINTS is set so that interrupt level provessing is avoided
2015-03-28 09:42:45 -06:00
Gregory Nutt
d7dbdfef58
SAMV7 EMAC: Sometimes TX is not started when TSTART is set??? Workaround seems to be to set it twice. Restored full optimization. Also CONFIG_NET_NOINTS is set so that interrupt level provessing is avoided
2015-03-28 09:42:45 -06:00
Gregory Nutt
2108499b4f
SAMV71-XULT: Add a network-enabled NSH configuration
2015-03-27 14:18:13 -06:00
Gregory Nutt
756d19ff28
SAMV71-XULT: Add a network-enabled NSH configuration
2015-03-27 14:18:13 -06:00
