Gregory Nutt
|
70f0ffdfc5
|
Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_
|
2013-07-26 10:09:17 -06:00 |
|
Gregory Nutt
|
4a81d47c86
|
Basic framework to support the AT91SAMA5D3 family and the SAMA5D3x-EK board(s) in particular
|
2013-07-19 15:23:03 -06:00 |
|
Gregory Nutt
|
bc7ac20616
|
Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port
|
2013-06-26 18:46:44 -06:00 |
|
Gregory Nutt
|
3d1f29217e
|
Add support for a separate CCM memory allocator for members of the STM32 family that support CCM memory
|
2013-06-25 09:13:30 -06:00 |
|
Gregory Nutt
|
3d975e0a08
|
Fix UG-2832HSWEG04 landscape. Add reverse landscape support to UG_2864AMBAG01 and UG-9964HSWAG01. Fixe NXHELLO default colors for 1-bit mono modes
|
2013-06-24 12:37:02 -06:00 |
|
Gregory Nutt
|
d11050e978
|
Add support for the UG-2843HHSWEG04 OLED and for the SAM4L Xplained Pro OLED module that uses that OLED.
|
2013-06-23 14:39:56 -06:00 |
|
Gregory Nutt
|
8959fffedc
|
SAM4L Xplained SLCD driver is complete
|
2013-06-23 09:05:20 -06:00 |
|
Gregory Nutt
|
b41c96e1f8
|
Beginning debug of SAM4L Xplained SLCD
|
2013-06-22 17:01:44 -06:00 |
|
Gregory Nutt
|
7b716cf8f5
|
The SAM4L Xplained Pro SLCD driver is code complete but untested
|
2013-06-22 10:39:25 -06:00 |
|
Gregory Nutt
|
69fc11bb71
|
Fix test of NULL pointer in the SAM3/4 SPI driver
|
2013-06-18 12:16:52 -06:00 |
|
Gregory Nutt
|
39dcedb0f1
|
SAM3/4 SPI phase control (CPHA) is inverted
|
2013-06-18 09:29:55 -06:00 |
|
Gregory Nutt
|
b9ad057972
|
MMC/SD driver needs to manage SPI mode and data width as well
|
2013-06-17 12:31:24 -06:00 |
|
Gregory Nutt
|
c7fd7a4e27
|
Re-architected SAM3/4 SPI interface; Change BUSY bit handling in the ADS7843E driver
|
2013-06-16 10:09:21 -06:00 |
|
Gregory Nutt
|
dd2983e26a
|
SAM MMCSD/SPI related changes
|
2013-06-15 17:00:52 -06:00 |
|
Gregory Nutt
|
44fe999aea
|
Add support for the SAM4L Xplained Pro I/O1 module
|
2013-06-15 10:56:08 -06:00 |
|
Gregory Nutt
|
b1afe69591
|
Fixes for SAM4S and 4L due to recent changes to SAM3S; Updated README files
|
2013-06-14 08:54:24 -06:00 |
|
Gregory Nutt
|
83ecc03d17
|
Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup
|
2013-06-12 17:32:00 -06:00 |
|
Gregory Nutt
|
ce8b9c0d3c
|
SAM4S: GPIO, chip characteristics, peripheral Kconfig
|
2013-06-11 12:28:31 -06:00 |
|
Gregory Nutt
|
da0526f0bd
|
Add a directory to hold configurations for the SAM4S Xplained board
|
2013-06-10 18:20:30 -06:00 |
|
Gregory Nutt
|
3eefc08c12
|
SAM4L: Add an NSH configuration and C++ support
|
2013-06-09 11:43:20 -06:00 |
|
Gregory Nutt
|
b24d51c3c7
|
SAM4L: Mic fixes to get the SAM4L Xplained running. The ostest now passes.
|
2013-06-09 10:57:42 -06:00 |
|
Gregory Nutt
|
11f81d3bfa
|
SAM4L: Add logic to enable selected peripherals on power up; Extend configuration so that each peripheral can be selected -- even though the drivers are not yet implemented
|
2013-06-07 14:59:33 -06:00 |
|
Gregory Nutt
|
29de68525d
|
SAM4L alternate pin mapping header file; Use USART1 for virtual COM port console
|
2013-06-03 17:53:05 -06:00 |
|
Gregory Nutt
|
a732e03139
|
Add a skeleton configuration that will eventually support the SAM4L Xplained Pro board
|
2013-06-03 15:11:56 -06:00 |
|