Gregory Nutt
|
caba61999a
|
Remove CONFIG_DISABLE_CLOCK
|
2014-08-07 12:35:24 -06:00 |
|
Gregory Nutt
|
44988c6ca6
|
Rename apps/examples/uip to apps/examples/webserver
|
2014-07-03 17:31:17 -06:00 |
|
Gregory Nutt
|
0eb1666cb0
|
NET: Rename uiplib/UIPLIB to netlib/NETLIB
|
2014-07-02 16:04:25 -06:00 |
|
Gregory Nutt
|
f924601fc1
|
The alternate console device CONFIG_NSH_CONDEV must not be defined unconditionally. This causes errors when using Telnet sessions. This was solved by adding CONFIG_NSH_ALTCONDEV: CONFIG_NSH_ALTCONDEV enables or disables the feature then, if enabled, CONFIG_NSH_CONDEV provides the alternative console device name
|
2014-05-05 08:52:02 -06:00 |
|
Gregory Nutt
|
e21212f2b4
|
Undefine IRQPRIO in all configurations it should not be set
|
2014-04-16 08:29:39 -06:00 |
|
Gregory Nutt
|
596bdc73df
|
Removed the CONFIG_NUTTX_NEWCONFIG setting from every defconfig file
|
2014-03-06 12:23:26 -06:00 |
|
Gregory Nutt
|
136488624a
|
configs/lpc4330-xplorer/nsh converted to use the kconfig-frontends tools
|
2014-03-01 16:01:13 -06:00 |
|
Gregory Nutt
|
e4c56e27ed
|
configs/eagle100/nsh converted to use the kconfig-frontends tools
|
2014-03-01 14:12:05 -06:00 |
|
Gregory Nutt
|
26009bf8bb
|
A consequence of previous change: Configurations that select a PHY also need to set CONFIG_NETDEVICES or PHY configuration will be lost on the next reconfiguration
|
2013-09-17 17:13:20 -06:00 |
|
Gregory Nutt
|
9557eb70db
|
Add prefex ETH0 to all PHY configurations to support multiple NICs
|
2013-09-17 10:44:23 -06:00 |
|
Gregory Nutt
|
70f0ffdfc5
|
Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_
|
2013-07-26 10:09:17 -06:00 |
|
Gregory Nutt
|
14df812735
|
SAMA5: Adapt clocking for different boot modes. New header files for AXI matrix, BSC, and SFR
|
2013-07-23 13:54:49 -06:00 |
|
Gregory Nutt
|
83ecc03d17
|
Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup
|
2013-06-12 17:32:00 -06:00 |
|
Gregory Nutt
|
88892d3bec
|
Remove non-existent CONFIG_xyz_USBDEV_DMAINTMASK configuration setting
|
2013-04-12 19:56:58 -06:00 |
|
patacongo
|
1c52dce216
|
More changes for a kernel-mode allocator (more to be done)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5724 42af7a65-404d-4744-a932-0658087f49c3
|
2013-03-09 21:12:20 +00:00 |
|
patacongo
|
e0e0006bc9
|
Set stdio buffer sizes to 0 or 64. No need for 256 or 1024 stdio buffers
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5604 42af7a65-404d-4744-a932-0658087f49c3
|
2013-02-03 17:47:03 +00:00 |
|
patacongo
|
a5fbf66049
|
Don't build drivers/mtd unless CONFIG_MTD is defined (Denis Carikli)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5519 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-15 00:03:58 +00:00 |
|
patacongo
|
3f0b723b7c
|
Fix a *critical* bug in the task exit logic. Implements SIGCHILD
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5513 42af7a65-404d-4744-a932-0658087f49c3
|
2013-01-12 19:58:45 +00:00 |
|
patacongo
|
8b5fb4c1f6
|
Patch to removed MMCSD NSLOTS warning from Freddie Chopin
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5316 42af7a65-404d-4744-a932-0658087f49c3
|
2012-11-06 14:57:01 +00:00 |
|
patacongo
|
918e70fe8e
|
Part I of port of Rhombus math library
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5269 42af7a65-404d-4744-a932-0658087f49c3
|
2012-10-28 14:31:57 +00:00 |
|
patacongo
|
279fc93c4e
|
Change all occurrences of CONFIG_EXAMPLE_ to CONFIG_EXAMPLES_ for consistency; fleshed out a few more Kconfig files
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5211 42af7a65-404d-4744-a932-0658087f49c3
|
2012-10-04 17:36:07 +00:00 |
|
patacongo
|
7a2692df6a
|
Resync new repository with old repo r5166
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5154 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-17 18:35:37 +00:00 |
|
patacongo
|
f39a3c9417
|
Remove several unused configuration values
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5113 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-08 04:29:48 +00:00 |
|
patacongo
|
d2ef49c64e
|
More Shenzhou board logic
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5111 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-08 02:10:56 +00:00 |
|
patacongo
|
116eff92b5
|
Update LPC43 Kconfig
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5103 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-06 15:38:53 +00:00 |
|
patacongo
|
59588247bf
|
Kconfig changes + back out part of last check-in: The 2STOP setting must be integer 0/1, not boolean
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5086 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-04 15:28:56 +00:00 |
|
patacongo
|
17e0c5198e
|
Changes to Kconfig and matching defconfig files
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5085 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-04 14:43:56 +00:00 |
|
patacongo
|
435dbaacd8
|
Add configurable application entry point
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5070 42af7a65-404d-4744-a932-0658087f49c3
|
2012-08-30 20:13:50 +00:00 |
|
patacongo
|
4509f0cb05
|
Remove documentation from defconfig files so that they are more maintainable
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5068 42af7a65-404d-4744-a932-0658087f49c3
|
2012-08-30 15:44:02 +00:00 |
|
patacongo
|
05d687e9eb
|
Lots of defconfig changes for compatibility with the configuration tool
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5050 42af7a65-404d-4744-a932-0658087f49c3
|
2012-08-23 22:46:36 +00:00 |
|
patacongo
|
b8a19e310e
|
CONFIG_DRAM_END configuration change from Richard Cochran
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5038 42af7a65-404d-4744-a932-0658087f49c3
|
2012-08-20 12:44:15 +00:00 |
|
patacongo
|
3b6ae1baaf
|
LPC43 update
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5001 42af7a65-404d-4744-a932-0658087f49c3
|
2012-08-03 14:57:30 +00:00 |
|
patacongo
|
272a475b52
|
Remove BOTHER
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4972 42af7a65-404d-4744-a932-0658087f49c3
|
2012-07-24 15:10:21 +00:00 |
|
patacongo
|
9dee8a084d
|
LP43xx SPIFI MTD driver update
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4971 42af7a65-404d-4744-a932-0658087f49c3
|
2012-07-23 20:08:56 +00:00 |
|
patacongo
|
58864cc6e9
|
Baud definitions (B9600 for example) are again encoded; Now supports the BOTHER settings which allows specifying the baud via c_ispeed and c_ospeed termios fields
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4970 42af7a65-404d-4744-a932-0658087f49c3
|
2012-07-23 15:37:13 +00:00 |
|
patacongo
|
369ef8947f
|
Loosen up termios interfaces to allow more flexible baud settings; remove AIX-like interfaces of last check-in
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4969 42af7a65-404d-4744-a932-0658087f49c3
|
2012-07-22 18:56:50 +00:00 |
|
patacongo
|
2131203d8b
|
Use NuttX types in FreeModBus port; Add FreeModBus demo at apps/examples/modbus; Add new termios APIs
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4964 42af7a65-404d-4744-a932-0658087f49c3
|
2012-07-21 21:23:18 +00:00 |
|
patacongo
|
8710555aef
|
Add FreeModBus to NuttX build system
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4962 42af7a65-404d-4744-a932-0658087f49c3
|
2012-07-21 15:33:53 +00:00 |
|
patacongo
|
89473befdf
|
Add completed but untested support for RS-485 on the LPC43xx
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4959 42af7a65-404d-4744-a932-0658087f49c3
|
2012-07-20 18:32:16 +00:00 |
|
patacongo
|
9faa2e9ece
|
Add infrastructure to support RS-485 on the LPC43xx (logic still incomplete)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4958 42af7a65-404d-4744-a932-0658087f49c3
|
2012-07-20 16:58:39 +00:00 |
|
patacongo
|
31dc0f21f6
|
Update driver to work with and external SPIFI library (vs. ROM)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4952 42af7a65-404d-4744-a932-0658087f49c3
|
2012-07-18 21:04:15 +00:00 |
|
patacongo
|
56f50d59fc
|
Create an MTD driver for SPIFI
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4951 42af7a65-404d-4744-a932-0658087f49c3
|
2012-07-18 18:38:49 +00:00 |
|
patacongo
|
3e483d3809
|
Add logic to initialize the LPC43xx SPIFI device
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4949 42af7a65-404d-4744-a932-0658087f49c3
|
2012-07-17 20:02:57 +00:00 |
|
patacongo
|
f6b7147cd6
|
Fix LPC43xx clocking bugs; LPC43xx now runs at 204MHz
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4946 42af7a65-404d-4744-a932-0658087f49c3
|
2012-07-16 21:25:29 +00:00 |
|
patacongo
|
0d3894b888
|
Calibrate lpc4330-xplorer delay loops
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4939 42af7a65-404d-4744-a932-0658087f49c3
|
2012-07-13 16:28:49 +00:00 |
|
patacongo
|
ea8678e727
|
Implement basic SPIFI block driver for the LPC43xx (doesn't work)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4938 42af7a65-404d-4744-a932-0658087f49c3
|
2012-07-13 16:03:13 +00:00 |
|
patacongo
|
c1cd96fda7
|
Add an NSH configuration for the LPC43xx
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4930 42af7a65-404d-4744-a932-0658087f49c3
|
2012-07-11 18:52:59 +00:00 |
|