Gregory Nutt
|
cc497202ed
|
SAMV71-XULT: Add support for SDRAM (unverified)
|
2015-03-14 11:00:46 -06:00 |
|
Gregory Nutt
|
cbdaa0dc77
|
Include correct chip file
|
2015-03-14 09:15:11 -06:00 |
|
Gregory Nutt
|
867bd20f5c
|
SAMV7: Add SDRAMC register definition header file
|
2015-03-14 09:13:51 -06:00 |
|
Gregory Nutt
|
9c5205142f
|
SAMV7 HSMCI: Change system bus interfaces seems to eliminate DMA failures.
|
2015-03-13 14:35:36 -06:00 |
|
Gregory Nutt
|
0b64c51a13
|
Minor updates from initial debugging.
|
2015-03-13 13:46:27 -06:00 |
|
Gregory Nutt
|
db786ea654
|
SAMV7 HSMCI: Reading response registers at the wrong time can cause loss of response data.
|
2015-03-13 12:46:33 -06:00 |
|
Gregory Nutt
|
ad216583b7
|
SAMV7: Fix some cloning errors. SAMA5->SAM7
|
2015-03-13 10:38:10 -06:00 |
|
Gregory Nutt
|
74548a5ed4
|
Fix a typo in a Cortex-M7 address
|
2015-03-13 10:37:21 -06:00 |
|
Gregory Nutt
|
ce0021e753
|
STM32 serial: Make input hardware flow-control work with RX DMA. From Jussi Kivilinna
|
2015-03-13 07:18:21 -06:00 |
|
Gregory Nutt
|
6cb5b48300
|
STM32: Fix RX DMA setup for UART5. From Jussi Kivilinna.
|
2015-03-13 07:06:46 -06:00 |
|
Gregory Nutt
|
4580af6d0b
|
SAMV7: Quick'n'dirty port of the SAMA5 HSMCI driver to the SAMV7
|
2015-03-12 18:03:41 -06:00 |
|
Gregory Nutt
|
743fd5ac50
|
SAMV71: Quick'n'dirty port of the SAMA5 SSC driver to the SAM7. The IP is compatible but there are still some DMA- and Cache-related issues that need to be worked out.
|
2015-03-12 16:00:38 -06:00 |
|
Gregory Nutt
|
da3233a527
|
SAMV71-XULT: Enable I2C and the I2C tool in the NSH configuration
|
2015-03-12 12:27:06 -06:00 |
|
Gregory Nutt
|
109b9910f6
|
SAMV7: Add TWI/I2C driver (untested)
|
2015-03-12 10:58:11 -06:00 |
|
Gregory Nutt
|
00a841c417
|
SAMV7: Add SPI header files and driver
|
2015-03-12 09:12:37 -06:00 |
|
Gregory Nutt
|
0b8248b33c
|
stm32: usbdev: Fix stale initialization invalidating later NULL check. From Juha Niskanen
|
2015-03-12 08:08:50 -06:00 |
|
Gregory Nutt
|
9997fa77ad
|
ARMv7-M MPU. Bad syntax will cause failure to write the correct value to the MPU_RASR register. From Juha Niskanen
|
2015-03-12 08:00:53 -06:00 |
|
Gregory Nutt
|
99f4e31b69
|
stm32_i2c: Add missing NULL check. From Juha Niskanen
|
2015-03-12 07:53:41 -06:00 |
|
Gregory Nutt
|
70e7dcba71
|
Bringing PPPD yet closer to the NuttX coding style
|
2015-03-11 18:47:04 -06:00 |
|
Gregory Nutt
|
90bc4b81ee
|
SAMV7-XULT: Integrate button support and apps/examples/buttons into the NSH configuration
|
2015-03-11 14:41:58 -06:00 |
|
Gregory Nutt
|
3d60cc7768
|
SAMV7: Correct low-level console output
|
2015-03-11 14:39:32 -06:00 |
|
Gregory Nutt
|
ca8165dd10
|
SAMV71-XULT: Enable 64-bit floating point support
|
2015-03-11 12:30:14 -06:00 |
|
Gregory Nutt
|
da844f1a88
|
SAMV71-XULT: Switch to the ARM GNU tools for Embbeded tools that actually support Cortex-M7
|
2015-03-11 12:16:27 -06:00 |
|
Gregory Nutt
|
508d96b571
|
SAMV7-XULT: Enable I- and D-caches, correct polaty of LEDs
|
2015-03-11 11:23:19 -06:00 |
|
Gregory Nutt
|
65e34be9b4
|
Update COPYING file with special license requirements for PPPD
|
2015-03-11 09:14:15 -06:00 |
|
Gregory Nutt
|
834072815b
|
SAMV71-XULT: Some bugfixes from early bring-up work
|
2015-03-10 16:11:28 -06:00 |
|
Gregory Nutt
|
fe1aaf76fc
|
Tiva TimerLib: Fix a typo in peripheral waiting logic: gptm, not gpio. From Bradley Noyes
|
2015-03-10 12:16:40 -06:00 |
|
Gregory Nutt
|
426888efb5
|
SAMV7: Add logic to enable/disable TCMs
|
2015-03-10 11:32:05 -06:00 |
|
Gregory Nutt
|
36e88e504a
|
SAMV7: Update floating point and TCM configuration options. Update TODO list. Update comments. Refresh a configuration
|
2015-03-10 07:50:32 -06:00 |
|
Gregory Nutt
|
26dec2c333
|
Cosmetic changes to conditional compilation
|
2015-03-09 18:14:31 -06:00 |
|
Gregory Nutt
|
4e306087af
|
Remove some traiilng whitespace
|
2015-03-09 15:42:35 -06:00 |
|
Gregory Nutt
|
e39077775d
|
Cortex-M7: Add cache operations
|
2015-03-09 15:42:07 -06:00 |
|
Gregory Nutt
|
d3033efa9c
|
Cortex-M7: Add cache operations
|
2015-03-09 15:41:48 -06:00 |
|
Gregory Nutt
|
66d48615c6
|
SAMV7: Leverage XDMAC driver from the SAMA5D4.
|
2015-03-09 10:11:12 -06:00 |
|
Gregory Nutt
|
cfca6b08c5
|
SAMV71-XULT: Add support for on-board LEDs. Includes partial support for on-board buttons. Some corrections fo to egg-stk37000 and sam4e-ek discovered during leveraging. Add board READEM.txt file
|
2015-03-09 08:23:09 -06:00 |
|
Gregory Nutt
|
5515f26de4
|
SAMV7: Add GPIO interrupt support
|
2015-03-08 19:32:05 -06:00 |
|
Gregory Nutt
|
6fdbbe6c4b
|
SAMV71: Add GPIO library support
|
2015-03-08 19:12:30 -06:00 |
|
Gregory Nutt
|
9cb9e8102c
|
SAMV7: Add PIO register definition header file
|
2015-03-08 17:34:26 -06:00 |
|
Gregory Nutt
|
73bd97e537
|
SAMV71: Add pin mapping definitions
|
2015-03-08 13:24:32 -06:00 |
|
Gregory Nutt
|
55c5d04c84
|
SAMV71: Fix a few typos; Use factional value in BAUD calculation
|
2015-03-08 12:27:55 -06:00 |
|
Gregory Nutt
|
2cb3c03678
|
SAMV7: Add serial driver
|
2015-03-08 10:15:42 -06:00 |
|
Gregory Nutt
|
6c608a05c7
|
SAMV71: Add UART register definition header file
|
2015-03-08 08:42:22 -06:00 |
|
Gregory Nutt
|
fe629e76b3
|
EFM32 updates from Pierre-noel Bouteville
|
2015-03-08 07:12:47 -06:00 |
|
Gregory Nutt
|
967e8bbc7b
|
SAMV71-XULT: Add heap allocation logic
|
2015-03-07 11:46:54 -06:00 |
|
Gregory Nutt
|
adbc25a05c
|
SAMV7: Add interrupt-related logic
|
2015-03-07 11:16:44 -06:00 |
|
Gregory Nutt
|
b3403dee6a
|
SAMV7: Add basic clock and timer ISR configuration logic
|
2015-03-07 10:32:47 -06:00 |
|
Gregory Nutt
|
839dd9baef
|
SAMV71: Add EEFC register definition header file
|
2015-03-06 16:39:18 -06:00 |
|
Gregory Nutt
|
8cb93302e9
|
SAMV71: Add Supply Controller register definition header file
|
2015-03-06 15:27:51 -06:00 |
|
Gregory Nutt
|
3440c94861
|
SAMV71: Add PMC register definition header files
|
2015-03-06 14:58:13 -06:00 |
|
Gregory Nutt
|
36d161fc2b
|
SAMV71: More updates on the way to a clean build. Still more to do to complete that journey
|
2015-03-06 12:13:09 -06:00 |
|