Commit Graph

31435 Commits

Author SHA1 Message Date
Anthony Merlino
cc536ba606 Merged in antmerlino/nuttx/sixlowpan-address-context (pull request #553)
sixlowpan: Completes configuration options for specifying preloaded address contexts for compression

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-12-07 19:42:40 +00:00
Masayuki Ishikawa
6150299f54 Merged in masayuki2009/nuttx.nuttx/irq_spinlock (pull request #550)
SMP: Introduce spin_lock_irqsave() and spin_unlock_irqrestore()

These APIs are simplified version of enter_critical_section() and
leave_critical_section() to protect data (e.g. registers) in SMP mode.
By using these APIs inside drivers, performace will be improved.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-12-07 19:39:04 +00:00
Gregory Nutt
8bc90a1899 This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available.
Squashed commit of the following:

    arch/arm/src/lpc54xx:  Finish off some missing logic.  Complete now execpt for GPIO and LED support.
    arch/arm/src/lpc54xx:  Add lpc54_clrpend.c
    arch/arm/src/lpc54xx:  Serial driver is complete and compiles.
    arch/arm/src/lpc54xx:  Add beginning of a serial driver (still missing some logic)
    arch/arm/src/lpc54xx:  Fleshes out low level USART intialization.
    arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half.
    arch/arm/src/lpc54xx:  Beginning of USART console support.
    arch/arm/src/lpc54xx: Completes very basic clock configuration.
    arch/arm/src/lpc54xx:  Add clocking logic (still not complete)
    arch/arm/src/lpc54xx:  Beginning of PLL configuration logic.
    arch/arm/src/lpc54xx:  Fix a few things from first compile attempt.  Compilation cannot work until I at least finish the clock configuration logic.
    arch/arm/src/lpc54xx: Addes some SysTick logic.
    arch/arm/src/lpc54xx:  Completes basic startup logic (sans clock configuration) and interrupt configuration.
     arch/arm/src/lpc54xx:  Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic.
    arch/arm/src/lpc54xx:  Add (incomplete) SYSCON register definition header file.
    arch/arm/src/lpc54xx:  Add FLEXCOMM header file.
    arch/arm/src/lpc54xx:  Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled.
    arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished)
    LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files.
    arch/arm/src/lpc54xx:  Add (incomplete) USART header file.
    Add another condition to a Kconfig; refresh a defconfig.
    arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files.
    configs/lpcxpresso-lpc54628:  Add basic build files for the LPCXpresso-LPC54628
    arch/: Basic build directory structure for the LPC54628
2017-12-07 13:30:02 -06:00
Gregory Nutt
ba64499bc7 Triva fix of typos in comments. 2017-12-07 11:11:21 -06:00
Jussi Kivilinna
ce88bc212d From c73dd8973accd312ca7675fde044df80e9cc62d5 Mon Sep 17 00:00:00 2001
From: Jussi Kivilinna <jussi.kivilinna@haltian.com>
Date: Thu, 7 Dec 2017 13:00:14 +0200
Subject: [PATCH] drivers/pipes: poll: fix off-by-one error in calculation of bytes in the buffer

Buffer calculation in pipe poll setup is off-by-one when read indexis larger than write index. This causes poll() not getting POLLINwhen buffer has one byte as calculation gives zero bytes in buffer.

Reproducible with:

  {
    char buf[8] = { 0, };
    int fds[2];
    struct pollfd in_pfd;

    pipe2(fds, 8);

    write(fds[1], buf, 7);
    read(fds[0], buf, 7);
    write(fds[1], buf, 1);

    in_pfd.fd = fds[0];
    in_pfd.events = POLLIN;
    ret = poll(&in_pfd, 1, -1); // pipe bug => stuck waiting
    assert(ret == 1);
  }
2017-12-07 07:12:11 -06:00
Gregory Nutt
68020edbf3 Update the 'About' document in preparation for the 7.23 release. 2017-12-04 15:14:46 -06:00
Gregory Nutt
1e0a259de9 Update ReleaseNotes in preparation for 7.23 release. 2017-12-04 13:06:21 -06:00
Gregory Nutt
2507163f84 Update ChangeLog in preparation for the 7.23 release. 2017-12-03 13:55:29 -06:00
Gregory Nutt
d540f3fd60 Costmetic update to comments and README. 2017-12-02 11:14:32 -06:00
Alan Carvalho de Assis
7311b132a1 arch/arm/src/xmc4/Kconfig: Define user friend SPI alias to follow other arch names
arch/arm/src/xmc4/Kconfig: Define user friend I2C alias to follow other arch names
arch/arm/src/xmc4/Kconfig: Define user friend LIN alias to follow other arch names
arch/arm/src/xmc4/Kconfig: Define user friend I2S alias to follow other arch names
2017-11-30 12:48:07 -06:00
Juha Niskanen
e8ee632378 sched/task/task_exithook.c: Clear atexit() function pointer before calling it. On most archs, up_assert() calls exit() so without this change, if atexit() function triggers an assertion we are in endless loop. 2017-11-30 06:41:57 -06:00
Gregory Nutt
97434ac5e5 net/pkt: Eliminate a compile error due to missing include and also a warning. 2017-11-29 15:20:15 -06:00
Ekaterina Kovylova
59a5c24739 drivers/mtd: Add a driver for Macronix MX35LFxGE4AB serial NAND flash. 2017-11-29 07:15:36 -06:00
Alan Carvalho de Assis
505358b08f configs/stm32f103-minimum: Add Nunchuck board support for stm32f103-minimum board 2017-11-29 07:06:54 -06:00
Gregory Nutt
2fb52cf3d9 Framebuffer Driver: Small modification convention for multi-planar displays (of which there are none). 2017-11-29 07:06:53 -06:00
Anthony Merlino
2b4f0b4a25 Merged in antmerlino/nuttx/ipfwd-remove-redundant-llheadersize (pull request #548)
net/devif: Do not add link layer header size to d_len inside devif_forward().

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-29 00:54:17 +00:00
Gregory Nutt
4d4029afeb Update README files 2017-11-28 14:43:36 -06:00
Gregory Nutt
1338360ff7 Fix a few typos. 2017-11-28 13:40:07 -06:00
Gregory Nutt
472fa0cf20 Add missing file in previous commit 2017-11-28 12:54:03 -06:00
Gregory Nutt
0c614311af Eliminate some warnings 2017-11-28 12:49:36 -06:00
Alan Carvalho de Assis
6e22092c67 configs/stm32f4discovery/src: Add stm32f4discovery board support for Nunchuck joystick 2017-11-28 12:23:02 -06:00
Alan Carvalho de Assis
a3e6d02d8b configs/stm32f4discovery/include/board.h: Remove only I2C pin config, we can use PB6 and PB9 2017-11-28 12:20:45 -06:00
Alan Carvalho de Assis
5a814a773d drivers/input/nunchuck.c: Add Nintendo Wii Nunchuck driver 2017-11-28 12:10:06 -06:00
Masayuki Ishikawa
da7f0542f0 Merged in masayuki2009/nuttx.nuttx/lc823450_rndis (pull request #549)
configs/lc823450-xgevk: Add rndis configuration

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-28 04:31:16 +00:00
Gregory Nutt
4a5532a772 Update TODO list. 2017-11-27 16:33:31 -06:00
Gregory Nutt
9c82ce2091 nuttx/graphics/nxglib: Add some REVISIT comments to some logic that looks suspicious. 2017-11-27 15:34:35 -06:00
Gregory Nutt
4eda9e92de arch/arm/src/lpc32xx: lpc32_adc.c was being selected by the build system wehn DAC was selected. 2017-11-27 10:12:03 -06:00
Masayuki Ishikawa
fb49472ec8 Merged in masayuki2009/nuttx.nuttx/lc823450_smp_audio (pull request #547)
lc823450 smp audio

* arch/arm/src/lc823450: Remove a workaround in up_cpu_paused()

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Introduce g_gpio_lock to improve write performance in SMP mode.

    NOTE: This is a tentative solution and should be replaced with more generic one.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Add a workaround in up_txready() to avoid data corruption.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/lc823450-xgevk: Enable CONFIG_SMP for audio

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/lc823450-xgevk: Update README.txt regarding SMP audio

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-27 07:20:54 +00:00
Gregory Nutt
43a221f308 configs: Remove some old, redundant, obsolete boilerplate regarding toolchains that has been cloned into most of the board README files. 2017-11-26 11:36:03 -06:00
Gregory Nutt
54f43ea1f1 Fix typos in Kconfig files: LCD_PACKEDMSFIRST, not LCD_PACKEDFIRST. 2017-11-26 07:57:17 -06:00
Gregory Nutt
318dd06f8b arch/arm/src/stm32: Fix compile error when trace is enabled. I2CEVENT_ERROR was used but never defined. 2017-11-26 06:51:12 -06:00
Gregory Nutt
b7eaec3de3 configs/stm3240g-eval: Add support for pdcurses and the pdcurses demo programs in the 'fb' configuration. 2017-11-26 06:32:43 -06:00
Gregory Nutt
5328e3bafb configs/: CONFIG_QENCODER was renamed to CONFIG_SENSORS_QENCODER: update occurrences in several Kconfig files 2017-11-25 18:46:43 -06:00
Alan Carvalho de Assis
674b331f03 arm/src/xmc4: Include Alt. Interrupt Enable to RX_EVENTS and rename serial GPIO configurations. 2017-11-25 18:13:23 -06:00
Gregory Nutt
38dc3fe442 STM3240G-EVAL: Mount procfs if enabled. 2017-11-25 18:03:01 -06:00
Gregory Nutt
c2c2c4f111 drivers/lcd: Make LCD driver configuration indepently selected from NX graphics configuration. This makes things awkward and loses some error checking but is a necessary step in order to make LCD drivers usable when the NX graphics system is disabled. 2017-11-25 13:13:30 -06:00
Gregory Nutt
4404be23cb XMC4 Serial: The Alternative Receive Interrupt was not being configured. 2017-11-25 12:21:33 -06:00
Gregory Nutt
5c27c0dad4 STM32F4 Discovery: Fix some errors do missing inclusion of stm32_gpio.h 2017-11-25 12:06:22 -06:00
Gregory Nutt
3657723208 drivers/lcd: Add support for external LCD initialization required by some board logic. configs/zpa214xpa: Tried to get the LCD working again unsuccessfully. Too much bit rot I suppose. 2017-11-25 11:41:21 -06:00
Gregory Nutt
776b65bc90 Revert "arch/arm/src/xmc4: Serial fix... Cannot use SR1 for RXD. It will not work on this hardware. This means that no more than on UART can be configured per USIC."
This reverts commit 88982df09c.
2017-11-25 09:45:12 -06:00
Gregory Nutt
3160613db4 Revert "arch/arm/src/xmc4/xmc4_config.h: Add a check to doubly enforce the one UART per USIC rule."
This reverts commit 63026b789b.
2017-11-25 09:44:51 -06:00
Gregory Nutt
63026b789b arch/arm/src/xmc4/xmc4_config.h: Add a check to doubly enforce the one UART per USIC rule. 2017-11-25 08:41:47 -06:00
Gregory Nutt
88982df09c arch/arm/src/xmc4: Serial fix... Cannot use SR1 for RXD. It will not work on this hardware. This means that no more than on UART can be configured per USIC. 2017-11-25 08:19:43 -06:00
Gregory Nutt
b2764a9e4b graphicx/nxmu: nx_server() should be static. 2017-11-25 06:54:13 -06:00
Alan Carvalho de Assis
639f77341a arch/arm/src/xmc4: Remove hard-coded values in clock configuration. USB will be fixed later. 2017-11-25 06:39:44 -06:00
Gregory Nutt
288db5c7b5 configs/xtrs: Removed the XTRS configuration This was an unverified port of NuttX to a TRS-80 simulator. It was removed because (1) it is, as I said, unverified as well as unsupported, and (2) the TRS-80 simulation is a sub-optimal platform. That platform includes a 16-bit ROM image and only a 48Kb RAM space. 2017-11-24 15:21:34 -06:00
Alan Carvalho de Assis
0ac8ac240a arch/arm/src/xmc4: Do not run at 144MHz unless BOARD_FCPU_144MHZ is selected in the board.h header file. 2017-11-24 12:47:47 -06:00
Alan Carvalho de Assis
3931621bde configs/xmc4500-relax: Setup max. freq. 120MHz and setup pull-up to UART RXD pin 2017-11-24 12:31:02 -06:00
Gregory Nutt
f068eb579c fs/procfs: Correct ordering of procfs entries. For consistency, use alphbetical ordering. 2017-11-24 10:00:35 -06:00
Gregory Nutt
37a9808dc9 Cosmetic fix to some alignment. 2017-11-24 08:34:39 -06:00