sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
10,643 Commits 1 Branch 0 Tags 291 MiB
cfca6b08c5
Commit Graph

177 Commits

Author SHA1 Message Date
Gregory Nutt
76007d28f5 Add support for dumping board-specific information on assertion. From David Sidrane 2015-03-04 07:00:29 -06:00
Gregory Nutt
beaf976626 arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions 2015-02-27 17:19:38 -06:00
Gregory Nutt
4f9998b4a8 Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test. 2015-02-09 16:12:11 -06:00
Gregory Nutt
3465cb6138 SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville. 2015-02-08 06:53:24 -06:00
Gregory Nutt
7e46e94546 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
32d2a4c548 All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called 2015-01-21 11:36:33 -06:00
Gregory Nutt
1ad73c52b1 Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address. 2015-01-20 15:52:25 -06:00
Gregory Nutt
a53ae59284 Networking: Add missing raw/packet socket support to all Ethernet drivers 2015-01-20 15:14:29 -06:00
Gregory Nutt
92f440c20c Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly. 2015-01-20 06:26:14 -06:00
Gregory Nutt
278c485229 Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received 2015-01-15 09:31:23 -06:00
Gregory Nutt
89538ac4a2 - Rename devif_input() ipv4_input() 
- Copy net/devif/devif_input.c to ipv6_input.c.  Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c.  Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
 2015-01-15 08:03:56 -06:00
Gregory Nutt
2f4aa0bde7 Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers 2015-01-15 07:07:39 -06:00
Gregory Nutt
388ef8db1a Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
7b310711a1 Update everything under nuttx/arch to use the corrected syslog interfaces 2014-10-08 12:48:47 -06:00
Gregory Nutt
56dc80cf59 The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object 2014-09-04 13:31:34 -06:00
Gregory Nutt
64ab35b399 There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing. 2014-09-01 15:39:34 -06:00
Gregory Nutt
205260d5e2 Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
1780810d3d Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
9aca0c1c84 Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming 2014-08-31 16:24:24 -06:00
Gregory Nutt
e3ff0689bb Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
45f3328247 Fix an error introduced into ALL implmentations of interrupt dispatch logic 2014-08-28 08:41:57 -06:00
Gregory Nutt
dfdaeb31ac Add address environment support to ALL implementatins of up_release_pending() 2014-08-28 08:10:19 -06:00
Gregory Nutt
9598412386 Add address environment support to ALL implementatins of up_reprioritize_rtr() 2014-08-28 07:54:07 -06:00
Gregory Nutt
eac58d5849 AVR32: Move address environment switch from the task switchers to the interrupt handler. That may save doing the action multiple times per interrupt 2014-08-28 07:06:19 -06:00
Gregory Nutt
9bc9d2d86d Add ADDRENV support to ALL implmentations of _exit() 2014-08-27 16:31:02 -06:00
Gregory Nutt
4d24c48901 Add ADDRENV support to ALL implementations of up_unblock_task() 2014-08-27 16:15:46 -06:00
Gregory Nutt
57c066b7a3 Add ADDRENV support to all implementations of up_block_task() 2014-08-27 15:36:52 -06:00
Gregory Nutt
ad9b3f8ab8 wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
Gregory Nutt
e1769b22f1 Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures 2014-08-08 18:39:28 -06:00
Gregory Nutt
d798dd37a7 Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h 2014-08-08 17:53:55 -06:00
Gregory Nutt
23a334c066 Move task control files from sched/ to sched/task 2014-08-08 16:44:08 -06:00
Gregory Nutt
d4b56eb3cc Move clock functions from sched/ to sched/clock 2014-08-08 14:43:02 -06:00
Gregory Nutt
c9661ad5a7 Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors 2014-08-07 18:00:38 -06:00
Gregory Nutt
736d3c169a Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined. 2014-08-06 16:26:01 -06:00
Gregory Nutt
60246e613b NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
0bb153b8cb Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
cce35ce975 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
400edda109 NET: Rename XYZ_uiptxpoll to just XYZ_txpoll 2014-07-01 18:41:08 -06:00
Gregory Nutt
b0c1b7ef47 Rename uip_poll->devif_poll and uip_timer->devif_timer 2014-06-30 18:40:41 -06:00
Gregory Nutt
da7379ed18 Rename uip_input to devif_input 2014-06-30 18:11:17 -06:00
Gregory Nutt
fce2a79abd Rename uip_driver_s net_driver_s 2014-06-27 16:48:12 -06:00
Gregory Nutt
621097b6c8 Rename ip_eth_hdr to eth_hdr_s 2014-06-25 09:57:52 -06:00
Gregory Nutt
5d1f8180d4 Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h 2014-06-24 10:14:15 -06:00
Gregory Nutt
37646044ac Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h 2014-06-24 09:28:44 -06:00
Gregory Nutt
90e4b55e0c Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_ 2014-05-30 12:13:06 -06:00
Gregory Nutt
7594d8b8cf Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:00:33 -06:00
Gregory Nutt
40972de8d7 Fix spelling, only one t in exiting 2014-04-27 15:49:38 -06:00
Gregory Nutt
f8024cf409 More trailing whilespace removal 2014-04-13 16:22:22 -06:00
Gregory Nutt
494387b33b Make sure that there is one space after for 2014-04-12 13:28:22 -06:00
Gregory Nutt
056aed1274 Make sure that there is one space between while and condition 2014-04-12 13:09:48 -06:00