sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
33,137 Commits 1 Branch 0 Tags 291 MiB
d0254b1c79
Commit Graph

33137 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Gregory Nutt
d0254b1c79 Squashed commit of the following: 
libs/libc/stdio/lib_libvsprintf.c:  Resolves the integer field width problem if Issue 35 for the cases of long and long long integer types.

    libs/libc/stdio/lib_libvsprintf.c:  Resolves the integer field width problem if Issue 35 for the case of integer types.

    libs/libc/stdio:  Remove CONFIG_NOPRINTF_FIELDWIDTH.  That option does, indeed, make the printf family of functions much smaller.  But it also adds a lot of complexity and makes the functions non-standard.  Removing this might break some of the tinier platforms but it is the best thing to do for long term maintanance for for OpenGroup.org compliance.
 2018-10-05 09:33:48 -06:00
raiden00pl
342cbe58dd Merged in raiden00/nuttx_pe (pull request #732) 
configs: add support for nucleo-f302r8 board

Approved-by: GregoryN <gnutt@nuttx.org>
 2018-10-05 13:02:49 +00:00
raiden00pl
2fcf682316 Merged in raiden00/nuttx_pe (pull request #731) 
stm32_tim.c: don't use hardcoded UIF interrupt in some functions

Approved-by: GregoryN <gnutt@nuttx.org>
 2018-10-04 16:16:54 +00:00
raiden00pl
ff0640096f Merged in raiden00/nuttx_h7 (pull request #730) 
Master

* stm32h7/rcc: update rcc defs, add SPI clock configuration and some fixes in rcc

* stm32h7: initial defs for SPI

* stm32h7: initial defs for MDMA, DMA, BDMA and DMAMUX

Approved-by: GregoryN <gnutt@nuttx.org>
 2018-10-04 16:16:14 +00:00
Gregory Nutt
8eac8ee52a Trivial updates after review of last merge. 2018-10-03 11:22:22 -06:00
Mihai Serban
b01e6e5f2a libs/libc/stdio/lib_sscanf.c: Fix conversion for format specifiers that appear right after a floating point format specifier 
When performing a floating point conversion the parsing code could
consume more than required characters from the input buffer. This made
impossible to convert input of form "1.1K" using format "%f%c".

Fix the issue by advancing the input buffer with the actual characters
converted as a float point number.

Signed-off-by: Mihai Serban <mihai.serban@gmail.com>
 2018-10-03 11:15:44 -06:00
Gregory Nutt
300b26d1d8 Documentation/NuttShell.html: Another trivial update. 2018-10-02 13:47:47 -06:00
Gregory Nutt
c1fdd2d6b1 Documentation/NuttShell.html: Trivial correction in comparison to Bash behavior. 2018-10-02 12:14:36 -06:00
Gregory Nutt
4eeba49507 Documentation/NuttShell.html: Add a little more information for the NSH set command. 2018-10-02 11:57:39 -06:00
Gregory Nutt
faefa6cd9f libs/libc/netdb/lib_getaddrinfo.c: Fix a warning found in build testing. 2018-10-02 11:16:47 -06:00
Gregory Nutt
b9823ce1d7 EFM32, STM32 (FS/HS), STM32F7, and STM32L4 OTGFS/HS: Th epin_configure() function used the same eptype as the TxFIFO number for all endpoints. This should probably be the physical EP number, not the EP type. Suggested by Key Two. 2018-10-02 10:10:56 -06:00
Gregory Nutt
a90e031028 Documentation/NuttShell.html: Improve an explanation. 2018-10-02 06:52:47 -06:00
Gregory Nutt
c04b9ef7bd Documentation/NuttShell.html: Add description of the PATH environment variable. 2018-10-01 15:09:16 -06:00
Gregory Nutt
1236d194ac Documentation/NuttShell.html: Update document to describe the 'export' command, the CONFIG_NSH_VARS setting, and the effect of this setting on the behavior of the 'set' and 'unset' commands. 2018-10-01 14:30:44 -06:00
Gregory Nutt
af50ab0088 sched/environ/env_unsetenv.c: Fix a memory leak introduced by the previous commit. 2018-09-30 11:45:59 -06:00
Gregory Nutt
d3c2373940 sched/environ/env_unsetenv.c: Fix and error in unsetenv() when unsetting the last of the environment variables. 2018-09-30 11:40:10 -06:00
Gregory Nutt
4391b51cd3 fs/procfs/fs_procfsproc.c: Change output of the env file so that it looks more like output from the 'env' command. Documentation/NuttShell.html: Document the new NSH 'env' command. 2018-09-30 11:15:28 -06:00
Gregory Nutt
a037aeec5d Trivial update to a comments and to SPIFFS comments and debug output. 2018-09-30 07:15:15 -06:00
Gregory Nutt
d23c5e0d61 fs/spiffs: Add a check for an error in a return value. Improve some working in the TODO list. 2018-09-29 17:19:04 -06:00
Gregory Nutt
cc539d7f95 fs/spiffs: Need to flush cache to FLASH when closing file. Also updates TODO list. 2018-09-29 15:04:11 -06:00
Alan Carvalho de Assis
c4a906aef4 drivers/leds/max7219.c: Support all digits presented in the MAX7219 datasheet. 2018-09-29 11:16:45 -06:00
Gregory Nutt
d8bfb4e3a2 fs/spiffs: Fix some disagreement between the NuttX wrapper and the core SPIFFS with regard to meaning of a return value. This was causing more writes than necessary and wasting FLASH space. 2018-09-29 11:01:46 -06:00
Gregory Nutt
5fad655982 configs/sim/spiffs/defconfig: Remove CONFIG_EXPERIMENTAL. 2018-09-28 20:05:42 -06:00
Gregory Nutt
6a12213fbb fs/spiffs: I have been test with apps/examples/fstest which provides a good exercise but of the FS internals but not of the user interface. I build an SPIFFS aware NSH configuration and found and fixed a number of glaring usability errors: (1) Missing logic to stat the SPIFFS root directory, (2) Confusion in use to two similarly named struct field... caused files to be unexpectedly deleted. (3) Fixed a sempahore deadlock condition. And (5) Fix /procfs/mount. It was unaware of the SPIFFS file system type. 2018-09-28 17:35:25 -06:00
Gregory Nutt
e90723307e fs/spiffs: Fix an error in who the deferred 'unlink' is handling in close(). Modify read() and write behavior() so that they do not return so many partial reads and writes. 2018-09-28 13:21:44 -06:00
Gregory Nutt
294456fa20 fs/spiffs: Add logic to dump the logical context of the FLASH. 2018-09-28 11:23:42 -06:00
Dave Marples
91eb792e56 Corrections for the i.MXRT Ethernet: 
(1) Now the Ethernet is completely re-initialized when an error occurs by means of taking the interface down and back up but the PHY is _not_ renegotiated for that case because that is very time consuming and an error in the Ethernet is no reflection on the state of the PHY anyway.

(2) Explicitly sets the expected PHY address to zero (this could be moved into the config) rather than searching for it which takes ages, and it's zero anyway for this board (that's the broadcast address, and anything that cannot respond on that has multiple PHYs, so that would be a new board).

(3) Allows for the renegotiation of the PHY to be optional when a reset is needed. If a non-renegotiated reset doesn't result in good comms to the PHY then it'll automatically be escalated to a renegotiated one.

(4) Only performs a reset for errors that need it (the CRITICAL_ERROR define).  The list of errors that need reset are somewhat arbitrarily chosen based on my prejudices and might need to be revisited, but certainly the jabber errors don't need reset, the partial packet is thrown away by the layer above anyway.

(5) Re-loads the multicast table on reset.

(6) Adds a bit more logging into the imxrt Ethernet module.
 2018-09-28 07:25:48 -06:00
Gregory Nutt
2ca8c6682c fs/spiffs: fs/spiffs: Fix several bugs: (1) Fix bad statfs return values. (2) Fix an error in spiffs_unlink(). Fix an in error detection logic when closing a file. 2018-09-27 19:29:00 -06:00
Gregory Nutt
2d2dd5e9e3 fs/spiffs: Fix bad check for return value. In NuttX all values greater than or equeal to 0 are successes. 2018-09-27 14:24:46 -06:00
Gregory Nutt
1273f727c0 File System IOCTLs: Three new IOCTLS were added for SPIFFS, two of which were duplicates. 2018-09-27 12:25:23 -06:00
Gregory Nutt
65ef3acf70 fs/spiffs: Still uses some internal error codes that should be replaced with errors from errno.h. For now, I just added a mapping function before any value is returned to the caller: And of these detailed internal errors are simply mapped to -EFTYPE. Most are related to improper internal data structures so -ETYPE is possibly appropriate. Aslo SPIFFs is no longer is EXPERIMENTAL. Many things work but I the code is very immature and many things will not work. 2018-09-27 11:33:09 -06:00
Gregory Nutt
554745946d fs/spiffs: The MTD interfaces needs its own, dedicated page buffer for read-modify-write operations. It cannot share the normal 'working' page buffer because it is sometimes in-use when the MTD interface needs it. Also and more DEBUG output and controls for the MTD interface. 2018-09-27 09:35:58 -06:00
Masayuki Ishikawa
b154c81255 Merged in masayuki2009/nuttx.nuttx/lc823450_mpu_for_flat (pull request #728) 
arch/arm/src/lc823450: MPU support for FLAT build

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: GregoryN <gnutt@nuttx.org>
 2018-09-27 11:34:22 +00:00
Gregory Nutt
7a2f70495a fs/spiffs: Fix yet another interface with NuttX MTD. This time, the calculation of the number of whole blocks. 2018-09-26 20:00:25 -06:00
Gregory Nutt
5cc68ad3b8 fs/spiffs: Fix yet another interface with NuttX MTD. This time, the calculatio of the terminal block number. 2018-09-26 18:30:46 -06:00
Gregory Nutt
b4488a0549 fs/spiffs: Fix an error in write operation. examples/fstest now gets further before errors occur, but still does not work correctly. 2018-09-26 18:00:46 -06:00
Gregory Nutt
31e6fb561b fs/spiffs: Costmetic name changes more more consistency. 2018-09-26 15:50:55 -06:00
Gregory Nutt
d59893a456 fs/spiffs: Fixes yet another SPIFFS/MTD interfacing bug. 2018-09-26 15:16:38 -06:00
Gregory Nutt
63ba200957 fs/spiffs: Correct error in MTD multi-block read/write logic. 2018-09-26 12:29:42 -06:00
Dave Marples
4eb118afd1 arch/arm/src/imxrt/imxrt_enet.c: Fix a race condition in setting up the Ethernet Tx transfer. 2018-09-26 10:59:47 -06:00
Gregory Nutt
6e4545a924 Upate TODO list to reflect consequences of commit 3b1cc69d68 2018-09-26 10:27:50 -06:00
Ivan Ucherdzhiev
910e7a3899 arch/arm/src/imxrt/imxrt_lpsrtc.c: SVNC LPCR register bits 0 & 1 are NOT reserved and are, in fact, needed to enabled the SRTC. Now the SRTC is working. 2018-09-26 10:13:20 -06:00
Gregory Nutt
6d2cce99e1 fs/spiffs: Fix more problems found in testing. It is getting closer but examples/fstest is still showing problem. 2018-09-26 10:05:43 -06:00
Ivan Ucherdzhiev
955527b14f arch/arm/src/imxrt: Add LPI2C driver. 2018-09-26 07:57:45 -06:00
Gregory Nutt
3b1cc69d68 include/nutt: Fix definitions used to access OS functions within the libraries. In the FLAT build, we must always set the errno and/or create cancellation points because the same library functions are used within the OS as are used by applications. This could cause issues for the OS but corrects some problems at the user interface. 
Noted by Federico Braghiroli in Bitbucket issue 121.
 2018-09-26 06:58:08 -06:00
Gregory Nutt
71eac2d530 fs/spiffs: Correct the MTD block write logic. 2018-09-25 18:05:45 -06:00
Gregory Nutt
9984e209ab fs/spiffs: Various fixes from initial testing. Still lots of issues. Also changes from further review to get better naming consistency and functional partitioning. 2018-09-25 16:19:03 -06:00
Anthony Merlino
c21dfbb93c Merged in antmerlino/nuttx/libcxx-build-fix (pull request #727) 
Fixes issue with libcxx build. This was changed multiple times, but should be fixed now.

Approved-by: GregoryN <gnutt@nuttx.org>
 2018-09-25 20:46:02 +00:00
Gregory Nutt
8373784afe Squashed commit of the following: 
fs/spiffs:  Finished review, update, and repartitioning of spiffs_core.c.

    fs/spiffs:  Converted macro SPIFFS_VALIDATE_OBJIX to a function.

    fs/spiffs:  Move SPIFFS_VALIDATE_DATA and SPIFFS_CHECK_RES macros inline.
 2018-09-25 12:15:24 -06:00
Anthony Merlino
5e69b6e09f Merged in antmerlino/nuttx/getaddrinfo-improvements (pull request #726) 
A few improvements to getaddrinfo:

- Use the protocol and socktype hints in returned address
  - Ignore AI_PASSIVE argument if hostname is not NULL

Approved-by: GregoryN <gnutt@nuttx.org>
 2018-09-25 17:00:57 +00:00