Gregory Nutt
47d87fd857
configs/: Refresh ARM and Xtensa configurations.
2018-08-19 17:48:13 -06:00
Gregory Nutt
d481ac347d
configs: Both CONFIG_LIB_BOARDCTL=y and CONFIG_BOARD_INITIALIZE=y is not meaningful in the standalone NxWM. CONFIG_LIB_BOARDCTL=y is the better option so CONFIG_BOARD_INITIALIZE=y removed from these configurations.
2018-01-17 13:51:29 -06:00
Gregory Nutt
301bf1ee77
This commit eliminates the BOARDIOC_TSCTEST_SETUP command.
...
Squashed commit of the following:
configs: Each board now initializes the touchscreen controller as a normal part of its board bring-up. board_tsc_setup() is gone; the touchscreen controller is now treated like any other on-board device.
Remove all support for BOARDIOC_TSCTEST_SETUP
Move prototype for board_tsc_setup() from include/nuttx/board.h to individual board header files.
2018-01-17 09:33:28 -06:00
Gregory Nutt
fdf4e40b6a
configs/lpcxpresso-lpc54628: Correct SRAM base address in all configurations.
2018-01-13 08:34:58 -06:00
Gregory Nutt
f5c5f89592
arch/arm/src/lpc54xx: Add (incomplete) Ethernet register definition file. Add framework for an Ethernet driver. Initial commit is just the drivers/skeleton.c with naming updated for the LPC54.
2017-12-26 12:55:58 -06:00
Gregory Nutt
6f897d32a2
confifgs/lpcxpresso-lpc54628: Calibrate delay loop.
2017-12-19 08:21:41 -06:00
Gregory Nutt
5a0963f0b0
drivers/ft5x06.x and related: Minor cleanup after completing the FT5x06 driver verification.
2017-12-19 07:14:02 -06:00
Gregory Nutt
d9997846b6
Lpcxpresso-Lpc54618 and FT5x06 driver. Some improvements in configuration and the touchscreen driver improves the behavior some. Now I get the calibration screen and detect touches (but no un-touches).
2017-12-18 17:22:35 -06:00
Gregory Nutt
ead23dca30
configs/lpcxpresso-lpc54628: Add an NxWM configuration. Not yet functional.
2017-12-18 13:33:37 -06:00
