David Sidrane
d0c58fffb3
Kinetis:Refactor clocking in kinetis_usbdev
...
1) Removed SIM_CLKDIV2[USBFRAC, USBDIV] setting as it is now
done in kinetis_clockconfig
2) Use BOARD_USB_CLKSRC to select the clock source to the
USB block
3) Removed warning
4) Removed CONFIG_TEENSY_3X_OVERCLOCK from the driver as
the board.h will now provide BOARD_SIM_CLKDIV2_USBDIV
and BOARD_SIM_CLKDIV2_USBFRAC to the kinetis_clockconfig
2017-02-27 13:13:24 -10:00
David Sidrane
1c518b223d
Kinetis:Add the configuring SIM_CLKDIV2[USBFRAC, USBDIV] in kinetis_clockconfig
...
If a board.h provides BOARD_SIM_CLKDIV2_FREQ it will configure the
SIM_CLKDIV2 based on the additional provided
BOARD_SIM_CLKDIV2_USBFRAC and BOARD_SIM_CLKDIV2_USBDIV
The reason for doing this globaly is that the output the
SIM_CLKDIV2 divisor may be also used for other IP blocks in
future configurations (as is done for SIM_CLKDIV3)
2017-02-27 13:06:01 -10:00
Gregory Nutt
8ff7e5106d
Teensy 3.x: Remove unused local definition that collides with a global definiion.
2017-02-27 09:13:10 -06:00
Maciej Wójcik
042f23221e
Merged in w8jcik/nuttx/w8jcik/option-to-enable-memory-card-debug-outpu-1488183957218 (pull request #224 )
...
Kconfig: memory card debug output without SDIO
Approved-by: Gregory Nutt
2017-02-27 12:45:23 +00:00
Gregory Nutt
433ed93aa0
Add some comments.
2017-02-27 06:25:31 -06:00
Maciej Wójcik
960b468ed3
option to enable Memory Card debug output was hidden with SD cards connected through SPI
2017-02-27 08:26:00 +00:00
Gregory Nutt
f97a99e051
C library: Remove unused static global from lib_dtoa.c
2017-02-26 18:17:08 -06:00
Gregory Nutt
4dbc0a27c6
pthread_create: g_pthreadname[] is not used if CONFIG_TASK_NAME_SIZE==0.
2017-02-26 18:15:16 -06:00
Gregory Nutt
1ed7bec85f
Merge branch 'master' of bitbucket.org:nuttx/nuttx
2017-02-26 14:53:48 -06:00
Alan Carvalho de Assis
0227de3e4d
Explain how to use SDCard configuration in the README.txt
2017-02-26 14:53:00 -06:00
Alan Carvalho de Assis
adb32e31a0
Add SDCard support over SPI on STM32F103-Minimum board
2017-02-26 14:51:38 -06:00
Gregory Nutt
bca0adec2b
Update comments in file headers.
2017-02-26 14:40:57 -06:00
Wolfgang Reißnegger
11efaf9f3a
Merged in gnagflow/nuttx (pull request #223 )
...
SAM3/4: GPIO bit numbering typo fixes.
Approved-by: Gregory Nutt
2017-02-26 18:03:07 +00:00
Wolfgang Reißnegger
774346ccdd
SAM3/4: GPIO bit numbering typo fixes.
2017-02-26 09:54:04 -08:00
Gregory Nutt
2e0ffc0ea3
Update some comments.
2017-02-26 09:15:57 -06:00
Mateusz Szafoni
45ca9f0bf8
Merged in raiden00/nuttx (pull request #222 )
...
Add basic support for the STM32F334 and Nucleo F334R8 board
Approved-by: Gregory Nutt
2017-02-26 13:57:17 +00:00
raiden00pl
0188bc49ce
Add Nucleo F334R8 board configuration
2017-02-26 12:42:43 +01:00
raiden00pl
3175b74428
Add basic support for the STM32F334
2017-02-26 12:39:44 +01:00
Gregory Nutt
2238912507
Fix some backward conditional compilation
2017-02-25 18:32:58 -06:00
Gregory Nutt
abfb070ee1
Kinetis: Try to make UART/LPUART definitions sane.
2017-02-25 17:48:05 -06:00
Gregory Nutt
27cac7f083
Fix error in last commit: defined, not define in conditional logic.
2017-02-25 16:44:27 -06:00
Gregory Nutt
1e1714b061
Kinetis: Resolve issue with duplicate definitions of up_putc. Addition conditional logic to pick just one.
2017-02-25 16:36:47 -06:00
Gregory Nutt
3112292ab0
Fix copy copy/paste errors in some comments.
2017-02-25 16:13:29 -06:00
Gregory Nutt
b6f5b77f2c
Add C files that reference ANIOC_TRIGGER now need to include nuttx/analog/ioctl.h
2017-02-25 15:54:10 -06:00
Gregory Nutt
f15f17a63d
Wireless and TSC: Add infrastructure to assure that all IOCTL commands are uniquely numbered.
2017-02-25 15:48:25 -06:00
Gregory Nutt
eb984e08d9
CAN: Add infrastructure to assure that all CAN IOCTL commands are uniquely numbered.
2017-02-25 15:28:27 -06:00
Gregory Nutt
b0efacebe1
include/nuttx/analog: Add an ioctl.h header file to coordinate analogic driver IOCTL commands.
2017-02-25 15:13:30 -06:00
Gregory Nutt
ee2f71ad3e
Kinetis USBDEV: Eliminate compilation error introduced by last SIM changes.
2017-02-25 13:26:53 -06:00
Gregory Nutt
48bc77ee6b
Update some comments.
2017-02-25 12:40:30 -06:00
Gregory Nutt
c8018f2b09
Freedom K66F: Fix a compilation error. Was including the wrong chip.h
2017-02-25 12:11:15 -06:00
Gregory Nutt
04ea69c32f
Kinetis: Fix some comple errors and warnings that came in with the last PR
2017-02-25 11:52:31 -06:00
Alan Carvalho de Assis
84be223144
STM32: Add function prototype to eliminate a warning.
2017-02-25 11:56:15 -06:00
Gregory Nutt
90e63ba18e
Purely cosmetic changes from review of last PR.
2017-02-25 11:43:05 -06:00
David Sidrane
38df949adc
Merged in david_s5/nuttx/upstream_kinetis (pull request #221 )
...
Kinetis:Add LPUART
Approved-by: Gregory Nutt
2017-02-25 17:23:04 +00:00
Gregory Nutt
d77d322a61
QEncoder: Add mechanism to assure that architecture-specific IOCTL commands do not overlap.
2017-02-25 11:15:59 -06:00
David Sidrane
df01e343a7
Kinetis:Add LPUART serail device driver
2017-02-25 07:06:04 -10:00
David Sidrane
0cbc03255c
Kinetis:Add LPUART and Clock configuartaion to freedom-k66f board
...
Pin out LPUART0 for testing
Define BOARD_SOPT2_PLLFLLSEL ti select MCGPLLCLK
Define BOARD_SIM_CLKDIV3_FREQ etal to provide BOARD_LPUART0_FREQ
2017-02-25 07:05:34 -10:00
David Sidrane
b553d34a68
Kinetis:Added configurable 1|2 stop bits
...
HAVE_SERIAL_CONSOLE -> HAVE_UART_CONSOLE to bew consistent with
HAVE_LPUART_CONSOLE naming
2017-02-25 07:02:56 -10:00
David Sidrane
dd218ffa8c
Kinetis:Extend clockconfig to support SOPT2_PLLFLLSEL and SIM_CLKDIV3
...
A board.h file can now specify the:
1) BOARD_SOPT2_PLLFLLSEL to select the output of the SIM_SOPT2 MUX
from:
MCGFLLCLK
MCGPLLCLK
USB1PFD
IRC48MHZ
2) If it defines BOARD_SIM_CLKDIV3_FREQ then it must define
BOARD_SIM_CLKDIV3_PLLFLLFRAC and BOARD_SIM_CLKDIV3_PLLFLLDIV
which wil be used to cpnfigure SIM_CLKDIV3 [PLLFLLFRAC, PLLFLLDIV]
2017-02-25 07:02:56 -10:00
David Sidrane
86c9f97f78
Kinetis: Add LPUART as lowlevel console
2017-02-25 07:02:56 -10:00
David Sidrane
29ab603a66
Kinetis:Add LPUART for use with K66
...
Add LPUART made UART5 an uption as the K66 does not have UART5
2017-02-25 07:02:56 -10:00
David Sidrane
61b10c5e58
Kinetis:Add LPUART to K66 chip
...
Add KINETIS_NLPUART setting it to 1 and adjust KINETIS_NUART
to removed UART5 as the K66 dioes not have UART5
2017-02-25 07:02:56 -10:00
David Sidrane
f6fe9beeb3
Kinetis:Add LPUART to config
2017-02-25 07:02:56 -10:00
David Sidrane
b280aef9c0
Kinetis:Add LPUART register definitions
2017-02-25 07:02:38 -10:00
David Sidrane
9061a3fb64
Kinetis: UART add UART_BDH_SBNS definition
2017-02-25 07:02:38 -10:00
Gregory Nutt
de0e2ec261
STM32: Remove one residual use of the obsoleted STM32_TIM27_FREQUENCY definition which does not work for all STM32 family members.
2017-02-25 10:04:28 -06:00
Gregory Nutt
4c6b635298
Fix error in previous commit.
2017-02-25 09:39:33 -06:00
Gregory Nutt
c694ca0ebc
Enable clocking to the timer on QE setup; disable clock on QE teardown.
2017-02-25 09:26:11 -06:00
Alan Carvalho de Assis
37298504e6
Fix QEncoder driver, based on STM32L4 driver
2017-02-24 16:10:28 -06:00
Gregory Nutt
8ee2e8d8b0
Most Ethernet drviers: Check if the poll timer is running before restarting it at the end of each TX.
2017-02-24 15:58:17 -06:00
