Gregory Nutt
|
23147c40a5
|
Remove final traces of the 8015 from the NuttX source tree
|
2014-09-01 13:21:15 -06:00 |
|
Gregory Nutt
|
3c1a70c9dc
|
Remove CONFIG_MM_MULTIHEAP. Non-multiheap operation is no longer supported
|
2014-08-31 10:54:55 -06:00 |
|
Gregory Nutt
|
38b1f11e57
|
Refresh all configurations that have MMUs
|
2014-08-30 07:51:13 -06:00 |
|
Gregory Nutt
|
df4525de25
|
Add linker scripts needed to build ELF modules
|
2014-08-24 12:57:42 -06:00 |
|
Gregory Nutt
|
021c3be415
|
Add ELF CFLAGS and LDFLAGS in some Make.defs files
|
2014-08-24 12:56:28 -06:00 |
|
Gregory Nutt
|
1624e2fbcf
|
Change CONFIG_ADDRENV to CONFIG_ARCH_ADDRENV; change how it is selected -- the architecure must first declare support
|
2014-08-24 06:42:11 -06:00 |
|
Gregory Nutt
|
2c41b35c6b
|
SAM4E-EK: Add an NxWM configuration
|
2014-08-20 14:15:34 -06:00 |
|
Gregory Nutt
|
a8d7772ad6
|
Update README files, Kconfig help comments, and make the network monitor not EXPERIMENTAL
|
2014-08-18 07:24:47 -06:00 |
|
Gregory Nutt
|
004788d7c0
|
Change the way PHY interrupts work: disable automatically. Then we have to re-subscribe each time after the interrupt fires
|
2014-08-17 16:51:56 -06:00 |
|
Gregory Nutt
|
7cc93b708a
|
SAMA5 PHY: Add more debug instrumentation; Fix logic that would be used to disable PHY interrupts
|
2014-08-17 14:07:53 -06:00 |
|
Gregory Nutt
|
1db9858e9d
|
KSZ80x1 PHY interrupts are active low and should trigger on the falling edge
|
2014-08-17 13:15:59 -06:00 |
|
Gregory Nutt
|
057af36c1d
|
More of the PHY event notification logic change: Fix some compile errors when full feature is enabled; Add some missing ioctol logic
|
2014-08-16 15:04:09 -06:00 |
|
Gregory Nutt
|
ec47914cf8
|
Convert existing board specific PHY interrupt interfaces to use newly defined standard interface
|
2014-08-16 08:35:31 -06:00 |
|
Gregory Nutt
|
d79c311508
|
SAMA5 setenv.sh: Add another CodeSourcery install path
|
2014-08-16 08:33:20 -06:00 |
|
Gregory Nutt
|
eef608b942
|
Update README files
|
2014-08-12 10:01:12 -06:00 |
|
Gregory Nutt
|
1787b3e600
|
SAMA5: Enable the 32.768 crystal if SCHED_TICKLESS is selected
|
2014-08-11 14:29:43 -06:00 |
|
Gregory Nutt
|
c6273d083d
|
Updated README files
|
2014-08-10 20:02:45 -06:00 |
|
Gregory Nutt
|
c7a51f4ef1
|
Cosmetic changed, updated README files, improved comments
|
2014-08-10 13:11:31 -06:00 |
|
Gregory Nutt
|
b39b227e2a
|
Update README files
|
2014-08-10 11:34:20 -06:00 |
|
Gregory Nutt
|
0aa7209765
|
Change CONFIG_MSEC_PER_TICK to CONFIG_USEC_PER_TICK. This gives more options for system timers in general, but more importantly, let's us realize higher resolution for the case of CONFIG_SCHED_TICKLESS=y -- of course, at the risk of some new interger overvflow problems
|
2014-08-07 13:42:47 -06:00 |
|
Gregory Nutt
|
caba61999a
|
Remove CONFIG_DISABLE_CLOCK
|
2014-08-07 12:35:24 -06:00 |
|
Gregory Nutt
|
7b9c44101d
|
SAMA5D3 HSMCI: TX DMA is again disabled
|
2014-08-05 07:07:39 -06:00 |
|
Gregory Nutt
|
23024b2d6a
|
SAMA5: Some usage documents for media players
|
2014-08-04 19:23:20 -06:00 |
|
Gregory Nutt
|
cc5c1b6539
|
WM8904: Update READMEs and defconfigs to last tested configuration
|
2014-08-04 15:36:16 -06:00 |
|
Gregory Nutt
|
e30d31367a
|
WM8904 interface enable method now returns the previous interrupt state. Correct ordering of some WM8904: Need to provide MCLK before initializing the WM8904, not after
|
2014-08-04 14:56:20 -06:00 |
|
Gregory Nutt
|
eebdae30b2
|
Correct the WM8904 interrupt configuration, active high level. Fix that and don't pull-up
|
2014-08-04 14:54:20 -06:00 |
|
Gregory Nutt
|
1f213064e0
|
SAMA5 WM8904: Add option to use MAINCK as WM8904 MCLK
|
2014-08-03 11:01:02 -06:00 |
|
Gregory Nutt
|
159bcc255d
|
SAMA5 PCK: Add Main clock as an option for the PCK clock source
|
2014-08-03 10:17:50 -06:00 |
|
Gregory Nutt
|
108ca4eaa5
|
SAMA5D3X-EK NxPlayer Configuration: Update with last WM8904 settings
|
2014-08-02 14:27:42 -06:00 |
|
Gregory Nutt
|
1f2428c087
|
WM8904: Ad the MCLK frequency to the interface definition. The WM8904 driver needs to know this frequency in order to configure the FLL to generate the correct bitrate
|
2014-08-01 18:37:56 -06:00 |
|
Gregory Nutt
|
e59bb45b33
|
Add debug logic to dump WM8904 registers
|
2014-08-01 18:07:20 -06:00 |
|
Gregory Nutt
|
83dab03576
|
SAMA5 WM8904: Fix errors in programmable clock output configuration
|
2014-08-01 15:18:58 -06:00 |
|
Gregory Nutt
|
805a02965c
|
SAMA5 SSC: Start Delay is now configurable
|
2014-08-01 14:10:37 -06:00 |
|
Gregory Nutt
|
50bd2ba46c
|
SAMA5 SSC: Frame Synch Delay is now configurable
|
2014-08-01 12:25:31 -06:00 |
|
Gregory Nutt
|
e836a974a5
|
Updated README
|
2014-07-31 15:00:24 -06:00 |
|
Gregory Nutt
|
5074f6cf7e
|
SAMA5D3x-EK NxPlayer: Updated Configuration
|
2014-07-31 11:32:44 -06:00 |
|
Gregory Nutt
|
72f43393ed
|
SAMA5D3x-EK: Add a configuration to support the command line NxPlayer.
|
2014-07-31 11:17:28 -06:00 |
|
Gregory Nutt
|
8450147004
|
SAMA5D3X-EK: Add support for the WM8904 audio CODEC
|
2014-07-31 11:15:52 -06:00 |
|
Gregory Nutt
|
c657139b30
|
SAMA5D3X-EK: Add support for the WM8904 audio CODEC
|
2014-07-31 11:14:57 -06:00 |
|
Gregory Nutt
|
78ffe6df56
|
SAMA5D3X-EK NSH: Refresh configuration
|
2014-07-31 11:13:10 -06:00 |
|
Gregory Nutt
|
276cc44878
|
SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller.
|
2014-07-30 11:20:06 -06:00 |
|
Gregory Nutt
|
7b1b915226
|
SAMA5D4: Add auto-mounter support for HSMCI0
|
2014-07-29 15:34:31 -06:00 |
|
Gregory Nutt
|
53930d5531
|
SAMA5D-EK: Correct system timer frequency. Input clock is MCK/2, not MCK
|
2014-07-29 07:12:36 -06:00 |
|
Gregory Nutt
|
d09ee81320
|
Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled
|
2014-07-26 18:47:33 -06:00 |
|
Gregory Nutt
|
8621769516
|
SAMA5D4 NxWM: Configuration now has the audio subsystem and the NxPlayer enabled
|
2014-07-23 15:20:54 -06:00 |
|
Gregory Nutt
|
c79f86c72c
|
SAMA5D3/4: All configurations. I suspect a MMC/SD multi-block DMA transfer issue. So for name, this feature is disabled in all configurations
|
2014-07-23 07:58:10 -06:00 |
|
Gregory Nutt
|
d8f85d1caa
|
SAMA5 PCK: Add support for the slow clock as the PCK clock source
|
2014-07-19 13:55:08 -06:00 |
|
Gregory Nutt
|
bad3ad58cb
|
SAMA5: Add slow clock support
|
2014-07-19 13:07:55 -06:00 |
|
Gregory Nutt
|
59d0be1b96
|
SAMA5D4-EK NxWM Configuration: Increase number of preallocated watchdogs and don't save child status (it is not being reaped)
|
2014-07-17 17:56:36 -06:00 |
|
Gregory Nutt
|
c7d8b6414f
|
NxWM: Increase default priority of mouse and keyboard listener threads. Does not seem to make any difference but still seems like a good idea
|
2014-07-17 15:06:05 -06:00 |
|