Some domains have a lot of IPv6 addresses. Because of that, it is
not possible to get the IPv4 address with getaddrinfo.
This change separate IPv4 and IPv6 cache size limit to enable to
get both IP addresses.
This commit ensures that RTC data is properly allocated in the RTC
segment in the linker. This fixes the reported problem about using
the legacy bootloader and RTC.
After the number of threads exceeds the array size, it will not be displayed.
Any number of threads can be displayed using dynamic adaptation
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Currently concerns only arm.
tools/ci/testlist/msys2.dat:
At the moment I only added the board nucleo-l152re:nsh
.github/workflows/build.yml:
Enabled cmake for msys2
Prior to this commit, i2c and at24 may be used uninitialized on line
113, 117, 129, and 143 when gd32_at24_wr_test() is called the second
time because these two variables are not static. I don't think making
them static is the correct fix because i2c is released at the end of
this function. Fixed by removing the `if (!initialized)` condition
surrounding the initialization of i2c and at24, making them initialized
at every call to this function.
Signed-off-by: Mingjie Shen <shen497@purdue.edu>
Description:
Example to interact with KEY button and user external button connected to PA1.
For KEY button pull-up resistor is active, board schematic does not show any pull-up or pull-down resistor.
Results: Example working as expected.
BlackPill PWM example
Description:
PWM example using PB0 - Timer3 - Channel 3
Create default configuration for the example.
Controlling_RGB_LED
Description: Controlling a RGB LED on NuttX for Black Pill board [STM32F411]
Note: Example currently not working as expected.
After changing sp, following functions calling will result
in unpredictable behavior in case of jumping
Signed-off-by: wanggang26 <wanggang26@xiaomi.com>
boards/xtensa/esp32s3/esp32s3-devkit|esp32s3-korvo-2/configs/sdmmc/defconfig: defconfig for sdmmc support
Add description for sdmmc support on esp32s3 in the board specific documentation.
Add defconfig for esp32s3-devkit with external adapter and emmc module.
Add defconfig for esp32s3-korvo-2 with SD slot enabled.
Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
./build.sh sim:usbdev -j12
sudo gdb nuttx/nuttx -ex "source nuttx/tools/gdb/__init__.py"
below command to create mbim NIC on host
nsh> conn 3
NuttX's MBIM device implementation adds an additional MBIM network
card to the NuttX system, which can debug the data communication with
the host, but this network card is unnecessary and needs to be removed
when the business actually uses this driver, And the cdcncm_receive
method needs to be re-implemented.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Update internal reference to get the most updated Espressif's
libraries. Those libraries are based on branch `release/v5.1` of
the ESP-IDF and include `v5.1.4` version of it.
1. increase CDCECM_MXDESCLEN to avoid memory overrun when sending
configuration description(mkcfmdesc) information
2. correct the request structure used in the notify phase
3. disable unused configuration options
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
arch/xtensa/src/esp32s3/hardware/esp32s3_sdmmc.h|esp32s3_soc.h,
boards/xtensa/esp32s3/common/include/esp32s3_board_sdmmc.h,
boards/xtensa/esp32s3/common/src/Make.defs|esp32s3_board_sdmmc.c,
boards/xtensa/esp32s3/esp32s3-devkit/src/esp32s3_bringup.c: add SD/mmc driver
Support 1-bit bus width and 4-bit bus width. Support eMMC high speed SDR mode.
Support transfer data with DMA. Support SD clock frequency up to 40MHZ.
Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
(1) Keep the `.init_array` and `.ctors` symbols and sort them according to their initialization priority.
(2) Exclude symbols ending with crtend.* and crtbegin.* to support c++
application.if we not exclude crtend.* crtbegin.* frame_dummy will be
added when enable any c++ application with global variables, this symbol
execution is problematic, removing it does not affect the application.
Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
This reverts both 2afdcfb6a6 and 0a0af89de9 to restore the 128K kflash
design as the implementation depends on that to work, checked with:
```
$ qemu-system-arm -M lm3s6965evb -nographic -device \
loader,file=nuttx.bin,addr=0x0 -device \
loader,file=nuttx_user.bin,addr=0x2000
```
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This renames a few RV32 configs to follow the convention that names w/o
numbers are for RV32, so that to be in line with majority RV32 configs.
As a result, we have: `nsh` vs `nsh64`, `knsh` vs `knsh64`, `pnsh`
vs `pnsh64`,`flats` vs `flats64`, `nsbi` vs `nsbi64`, `libcxx` vs
`libcxx64` etc. This helps us pick the right config name w/o checking
file contents.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
