Marten Svanfeldt
d1c7e5b5fb
Fix setup of PLLSAI in STM32F4xx.
...
To correctly setup the PLLSAI register it is required to first mask out
the old PLL divisor and multiplier factors before setting new ones
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 10:33:39 +08:00
Gregory Nutt
ddf936c913
Various fixes for compilation issues found by tools/testbuild.sh
2015-10-01 11:09:39 -06:00
Gregory Nutt
3a07b09b9a
LPC43xx: Tweaks to pkolesnikov's LPC4370 changes to get a clean compilation
2015-10-01 10:00:25 -06:00
Gregory Nutt
166d307add
STM32: Fix conditional compilation of TIM SYSLOG initialization
2015-10-01 08:39:21 -06:00
Gregory Nutt
3acc09c056
LPC43xx: Remove unused .c file picked up in a recent merge
2015-10-01 07:18:07 -06:00
Gregory Nutt
26347891ac
Apply same fix for ARMv7-M to other architectures
2015-09-30 11:21:04 -06:00
Gregory Nutt
08baf2fcc3
ARMv7-M: Fix logic that determines if there is a pending signal action before scheduling the next signal action. Both the test and the scheduling action need to be atomic
2015-09-30 11:00:33 -06:00
Lederhilger Martin
7d72d1defc
STM32 ADC: Fix some cut'n'paste typos in ADC header file
2015-09-30 07:21:50 -06:00
Gregory Nutt
dec9742df4
SAMV7 Cut'n'paste Errors; CONFIG_SAMV7_XDMAC, not CONFIG_SAMV7_DMAC0/1
2015-09-30 07:02:10 -06:00
Gregory Nutt
7fa4e4daab
SAMA5: Fix some SAMA5D3/4 bugs introduced with the SAMA5D2 changes
2015-09-29 16:10:10 -06:00
Gregory Nutt
be3adb678e
Change missed in last commit
2015-09-29 13:01:52 -06:00
Gregory Nutt
c88e9538d4
SAMA5Dx: Fix a header file naming collision
2015-09-29 12:49:24 -06:00
Stefan Kolb
51fb4d3252
SAMV7: SPI Slave fixes
2015-09-29 09:13:36 -06:00
Gregory Nutt
2a6c71e850
Costmetic changes from last merge to better conform to the coding standard
2015-09-29 09:06:16 -06:00
Gregory Nutt
daa4d4b422
Merged in petekol/arch (pull request #16 )
...
init hw, draft
2015-09-29 08:22:23 -06:00
pkolesnikov
e6ab9cc339
init hw, draft
2015-09-29 15:53:20 +02:00
Gregory Nutt
cd6b51847b
SAMV71: Fix SPI compilation errors when SPI DMA is enabled
2015-09-29 07:31:21 -06:00
Gregory Nutt
82cc93c71b
Add some comments to a Kconfig file
2015-09-24 14:53:04 -06:00
Gregory Nutt
50b64f6991
Sim target on Cygwin64: Modern Cygwin X86_64 machines follow the Microsoft ABI for parameter passing. The older,inux System 5 ABI will not work on X86_64-based Cygwin machines. With this change, the simulator agains works with the newer Cygwin64 platform
2015-09-24 14:41:57 -06:00
Gregory Nutt
569a29a327
Simulation: Newer versions of Cygwin tools do not seem to pre-pend symbol names with underscore character
2015-09-24 09:08:52 -06:00
Gregory Nutt
473a3cf2a6
STM32: Trivial chnages from review of merge
2015-09-23 15:00:47 -06:00
Gregory Nutt
f16c3fd763
Merged in pnb990/nuttx-kernel-arch (pull request #15 )
...
add swo for stm32F4xxx
2015-09-23 14:58:15 -06:00
Pierre-noel Bouteville
53fbd6b4ec
Merged nuttx/arch into master
2015-09-23 22:52:37 +02:00
pnb
f19c5e883d
add swo for stm32F4xxx
2015-09-23 22:51:22 +02:00
Gregory Nutt
cbdafb96d5
Remove unused function setipsr. Cortex-M IPSR register is not writable
2015-09-23 08:38:32 -06:00
Gregory Nutt
a1cbb7d8fb
Correct bad cut-and-paste in STM32 F7 stm32_uart.h. Noted by Vlad Chiorean
2015-09-22 09:02:06 -06:00
Gregory Nutt
139a31b875
stm32f74xx75xx_irq.h: STM32_IRQ_SAI2 is not defined but STM32_IRQ_SAI1 is defined twice. Noted by Vlad Chiorean
2015-09-22 07:45:59 -06:00
Gregory Nutt
7a2428819f
Minor style: # if pre-processor command should be in columnn 1
2015-09-18 12:47:24 -06:00
Gregory Nutt
39859a9645
All ARMV7-M: Force 8-byte stack alignment when calling from assembly to C to interrupt handling
2015-09-15 07:37:09 -06:00
Gregory Nutt
f7ca98c5ae
Fix error in almost all ARMv7-M interrupt stack handling
2015-09-14 07:07:13 -06:00
Gregory Nutt
f5d015d8a2
Clean up some kruft left in the SAMA5D2 PIO driver
2015-09-13 07:25:45 -06:00
Gregory Nutt
a27e673967
SAMA5D2: Finish implementtion of the PIO driver
2015-09-12 11:36:06 -06:00
Gregory Nutt
ac986987de
SAMA5D2: Add PIO driver. Still a work in progress
2015-09-12 09:58:18 -06:00
Gregory Nutt
7c62fcbe96
Rename sam_pio.c to sama5d53x4x_pio.c
2015-09-12 09:14:34 -06:00
Gregory Nutt
114f353224
SAMA5D2: Update matrix header file for the SAMA5D2
2015-09-12 09:02:42 -06:00
Gregory Nutt
94bdeda28e
SAMA5D2: Add PIO register definition header file
2015-09-12 08:24:48 -06:00
Gregory Nutt
b8c1f0bfeb
SAMA5: Rename chip/sam_pio.h to chip/sama5d3s4x_pio.h
2015-09-12 06:49:37 -06:00
Gregory Nutt
1f745e534b
SAMA5D2: Make sure that USART mode is selected for each Flexcom used as a serial device
2015-09-11 18:42:49 -06:00
Gregory Nutt
36eba6ef99
Fix some errors in comments
2015-09-11 18:03:40 -06:00
Gregory Nutt
cc0f1d1f04
SAMA5D: Ooops. Committed wrong version of RXLP header file
2015-09-11 18:01:38 -06:00
Gregory Nutt
7c4428b67e
SAMA5D2: Add RXLP register definition header file
2015-09-11 16:11:00 -06:00
Gregory Nutt
972ae84d95
SAMA5D2: Add logic to enable Flexcom clocking and to configure Flexcom pins
2015-09-11 14:54:30 -06:00
Gregory Nutt
b19c3d7cbe
SAMA5D2: Add Flexcom UART serial driver
2015-09-11 14:30:19 -06:00
Gregory Nutt
9385a98588
SAMA5D: Move common configuration logic from sam_lowputc.c and sam_serial.c to new sam_config.h. Make room in the architecture for forthcoming Flexcom USARTs
2015-09-11 12:00:30 -06:00
Gregory Nutt
a39b2351f0
SAMA5D2: Add Flexcom register definition header files
2015-09-11 10:40:12 -06:00
Gregory Nutt
f51541dfd6
SAMA5Dx UART: SAMAD4 also has BRSRCCK bit in the MR register
2015-09-11 08:27:18 -06:00
Gregory Nutt
9b55b91fea
Merged in paulpatience/nuttx-arch (pull request #14 )
...
Fix typo
2015-09-11 08:03:04 -06:00
Paul A. Patience
260778feb1
Fix typo
2015-09-10 21:07:03 -04:00
Gregory Nutt
cf7ea3bc3e
Updates for SAMA5D2: It has no USARTS
2015-09-10 17:15:52 -06:00
Gregory Nutt
2cdbc17a63
SAMA5: Fix support for varying number of PIO ports
2015-09-10 13:46:57 -06:00
