In SMP mode, up_cpu_index()/this_cpu() are the same, both return the index of the physical core.
In AMP mode, up_cpu_index() will return the index of the physical core, and this_cpu() will always return 0
| #ifdef CONFIG_SMP
| # define this_cpu() up_cpu_index()
| #elif defined(CONFIG_AMP)
| # define this_cpu() (0)
| #else
| # define this_cpu() (0)
| #endif
Signed-off-by: chao an <anchao@lixiang.com>
This commit implements functions icjx_multireadpin and icjx_multiwritepin.
These functions can be used for multiple pin access (read/write) if
CONFIG_IOEXPANDER_MULTIPIN is selected. This access is generally
faster than one by one pin and may simplify user application.
Changes to general functions icjx_read and icjx_write were also required
to provide support for multiple data send/receive.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This driver is based on ESP32 TWAI CAN drivers currently available
in Nuttx, and captures the differences currently present across the
TWAI drivers for easy future adaption to remaining ESP32 platforms
with no loss of support/function. Also provides a generic SJA1000 CAN
driver solution that is CPU-architecture independent.
Changes:
- Low-level driver re-written to allow usage independent of CPU
architecture, and support both SJA1000 and TWAI CAN controllers.
- Platform-specific settings abstracted away to be provided by board
layer.
- Support for multiple instances of SJA1000 driver.
if driver complete unlink ops, we need to call it to release some resource,
otherwise, it will only remove inode.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Adjust the v4l2 framework to support both capture and v4l2m2m,
and can easily add other v4l2 features.
Signed-off-by: shizhenghui <shizhenghui@xiaomi.com>
Because the ratio between API value and ISX019 register value
is 128 : 90 about HUE, some different API values become the
same register value.
So, store the value specified by application in setting,
and return the stored value in getting so that the gotten value
is the same as the setting value by application.
About IMGSENSOR_ID_EXPOSURE_AUTO, IMGSENSOR_ID_ISO_SENSITIVITY_AUTO,
and IMGSENSOR_ID_EXPOSURE_METERING, enumerations are defined.
So, control type should be not integer but integer menu.
About parameter whose register size is less than 4 bytes,
when transfer read value to API parameter, cast appropriately
to avoid the following problems.
- Read value includes garbage value
- Negative value becomes huge positive value
Modify control id definition to avoid duplication even if
the control ids belong to the same control class.
Also, not refer to control class in driver.
Taring was done with user defined sign, which later resulted in tare
being "resigned" twice. Because of that taring was workign correctly
for one sign, and not the other.
Fix it to disable user sign when tarring, and tare always without
changing sign.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
ptype of ((int32_t)0 * (uint32_t)0) is (unsigned). "i" counter was
declared unsigned to not make comparision with "unsigned char" in for loop.
This resulted in calculation in average to be implicitly casted to unsigned,
and when negative number was added to it, it turned into huge value.
Change type of "i" to signed, and just cast (unsigned char) to (int)
to fix this.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Use private naming to avoid conflicts with user applications
In file included from libuv/src/unix/internal.h:25,
from libuv/src/unix/udp.c:23:
libuv/src/uv-common.h:57: warning: "container_of" redefined
57 | #define container_of(ptr, type, member) \
|
In file included from nuttx/include/nuttx/list.h:47,
from nuttx/include/nuttx/tls.h:40,
from nuttx/include/nuttx/sched.h:48,
from nuttx/include/nuttx/arch.h:87,
from nuttx/include/nuttx/userspace.h:35,
from nuttx/include/nuttx/mm/mm.h:30,
from nuttx/include/nuttx/kmalloc.h:34,
from nuttx/include/nuttx/lib/lib.h:31,
from nuttx/include/stdio.h:35,
from apps/system/libuv/libuv/include/uv.h:59,
from libuv/src/unix/udp.c:22:
nuttx/include/nuttx/nuttx.h:48: note: this is the location of the previous definition
48 | #define container_of(ptr, type, member) \
|
Signed-off-by: chao an <anchao@lixiang.com>
In the previous patch, we moved rptun_panic and rptun_dump_all in rptun to rpmsg.
In order to ensure CI pass, this two API in rptun is not removed. So we remove rptun_panic and rptun_dump_all in this patch.
Signed-off-by: wangyongrong <wangyongrong@xiaomi.com>
The board's microphone uses 24-bit i2s and this commit also fixes
the segmentation fault caused by the audio buffer overflow.
arch/xtensa/src/esp32/esp32_i2s.c: Fix bug regarding 24-bit audio and add AUDIOIOC_STOP to ioctl
drivers/audio/audio_i2s.c: Report number of channels on AUDIOIOC_GETCAPS
in boards/xtensa/esp32/esp32-sparrow-kit:
/configs/nsh/defconfig: Add I2S configs
/src/esp32-sparrow-kit.h: Add the signature of esp32_i2sdev_initialize()
/src/esp32_bringup.c: Add call to esp32_i2sdev_initialize()
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
