Paul A. Patience
|
d24fa0b2ea
|
Add CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH
|
2015-12-08 11:24:01 -05:00 |
|
Gregory Nutt
|
4991f94792
|
Update README files
|
2015-12-02 09:22:26 -06:00 |
|
Gregory Nutt
|
99c460a696
|
Upate README files
|
2015-12-02 08:37:42 -06:00 |
|
Gregory Nutt
|
dd482c3f8b
|
New procfs entries must be added BEFORE the procfs is mounted
|
2015-12-02 05:18:10 -06:00 |
|
Gregory Nutt
|
dde6ba85a3
|
STM32F429i Discovery uses CCM procfs and so needs FS_PROCFS_REGISTER=y
|
2015-12-01 15:03:39 -06:00 |
|
Gregory Nutt
|
9a4192d22b
|
Remove CONFIG_NET_PINGADDRCONF. This was a uIP way of assigning IP addresses, but is not standard and not a appropriate feature in general.
|
2015-12-01 07:47:41 -06:00 |
|
Gregory Nutt
|
fba809d7c8
|
Update README files
|
2015-11-30 17:37:01 -06:00 |
|
Gregory Nutt
|
2e78fc7178
|
configs/same70-xplained: Added a network enabled NSH configuration
|
2015-11-30 16:50:40 -06:00 |
|
Gregory Nutt
|
2e3f1327bd
|
configs/same70-xplained/nsh: The NSH configuration now appears to be fully functional
|
2015-11-30 16:05:32 -06:00 |
|
Gregory Nutt
|
1f7df26f24
|
SAME70: Initialization has to be done a little differently because the board has no 32.768KHz crystal installed
|
2015-11-30 15:20:21 -06:00 |
|
Gregory Nutt
|
fbca4d4ecf
|
SAME70-Xplained: Update configuration: Board has only one button
|
2015-11-30 13:10:33 -06:00 |
|
Gregory Nutt
|
5926a09498
|
Update README
|
2015-11-30 13:05:14 -06:00 |
|
Gregory Nutt
|
049616b40d
|
SAME70 Xplained: Refresh configuration, enable PROCFS. Add logic to automatically mount procfs during initialization
|
2015-11-30 08:04:32 -06:00 |
|
Gregory Nutt
|
1216398f62
|
sam: Refresh all configurations: Enable PROCFS and NSH_ARCHINIT in all NSH configurations
|
2015-11-29 13:52:50 -06:00 |
|
Gregory Nutt
|
b9a26bae77
|
Move up_appinit.c to configs/sim/src where it belongs. Add logic to automatically mount the procfs file system if it is enabled.
|
2015-11-29 13:30:12 -06:00 |
|
Gregory Nutt
|
6b9c0c7c72
|
Fix an error commit with last changes
|
2015-11-29 12:12:43 -06:00 |
|
Gregory Nutt
|
463637f474
|
All SAMA5 configurations: Refresh configurations, enable PROCFS in all configurations that have CONFIG_NSH_LIBRARY=y, add logic to automatically mount the procfs if it is enabled
|
2015-11-29 11:34:09 -06:00 |
|
Gregory Nutt
|
7a551aed6e
|
STM32F4-Discovery: Refresh all configurations; enable PROCFS in all NSH configurations
|
2015-11-29 10:02:21 -06:00 |
|
Gregory Nutt
|
9701e66e5c
|
SAMV71-XULT and STM32F4Discovery: Automatically mount procfs on startup
|
2015-11-29 09:47:36 -06:00 |
|
Gregory Nutt
|
1fceb9463e
|
Update and enable procfs in all SAMV71-XULT configurations
|
2015-11-29 07:16:14 -06:00 |
|
Gregory Nutt
|
2eff9aa773
|
Enable procfs file system in sim/nsh configuration
|
2015-11-28 07:01:31 -06:00 |
|
Gregory Nutt
|
509028aa46
|
SAMV7-XULT: Enable procfs in the netnsh configuration
|
2015-11-27 12:31:51 -06:00 |
|
Gregory Nutt
|
d2f11015aa
|
Refresh (and fix) defconfig file
|
2015-11-26 17:29:44 -06:00 |
|
Gregory Nutt
|
c5e097f6d2
|
Refresh configuration
|
2015-11-26 13:16:46 -06:00 |
|
Gregory Nutt
|
4e10465541
|
Eliminate a warning
|
2015-11-26 12:51:13 -06:00 |
|
Gregory Nutt
|
87530bf910
|
Enable /dev/zero and /dev/loop in sim/nsh configuration
|
2015-11-26 06:58:09 -06:00 |
|
Gregory Nutt
|
651bd9e8ad
|
Rename CONFIG_LOOP to CONFIG_DEV_LOOP
|
2015-11-25 17:11:27 -06:00 |
|
Gregory Nutt
|
e687a9f1b9
|
sim/nsh: Enable NSH data command and extended time functions
|
2015-11-25 11:53:42 -06:00 |
|
Gregory Nutt
|
df431c1844
|
Merged in paulpatience/nuttx-boards/nucleo_f303re (pull request #22)
Nucleo F303RE: Comment out CONFIG_APPS_DIR
|
2015-11-25 10:18:23 -06:00 |
|
Gregory Nutt
|
6899f952d9
|
Merged in paulpatience/nuttx-boards/nucleo_f303re_serialrx (pull request #21)
Nucleo F303RE: Add serialrx configuration
|
2015-11-25 10:16:29 -06:00 |
|
Paul A. Patience
|
40c4dc435d
|
Nucleo F303RE: Comment out CONFIG_APPS_DIR
|
2015-11-25 11:06:22 -05:00 |
|
Paul A. Patience
|
15e25b6664
|
Nucleo F303RE: Add serialrx configuration
|
2015-11-25 11:00:30 -05:00 |
|
Gregory Nutt
|
bdc6882499
|
Refresh a configuration
|
2015-11-25 08:12:14 -06:00 |
|
Frank Benkert
|
570b211f44
|
SAMV71-XULT: Fix some bad conditional compilation. From Frank Benkert
|
2015-11-24 06:25:27 -06:00 |
|
Gregory Nutt
|
175d248af1
|
Refresh all configurations that have SMARTFS enabled. They should have MKSMARTFS enabled for backward compatibility.
|
2015-11-23 11:20:47 -06:00 |
|
Gregory Nutt
|
8669312a65
|
Merged in marawan31/boards (pull request #20)
added unique id implementation for f4discovery
|
2015-11-22 12:57:06 -06:00 |
|
marawan31
|
af7cfebff9
|
added unique id implementation for f4discovery
|
2015-11-22 13:28:59 -05:00 |
|
Marawan Ragab
|
79e89e04d1
|
Merged nuttx/boards into master
|
2015-11-22 13:26:03 -05:00 |
|
Gregory Nutt
|
abb7171a89
|
SAMV71-XULT: Add hooks for testing the PCF85263 RTC
|
2015-11-21 07:14:05 -06:00 |
|
Gregory Nutt
|
0ca9047488
|
SAME70 Xplained: Update some PHY pin definitions
|
2015-11-19 17:16:11 -06:00 |
|
Gregory Nutt
|
e9abfb0de8
|
SAMV71-XULT: Add support for an external I2C RTC
|
2015-11-19 14:52:52 -06:00 |
|
Gregory Nutt
|
cedec09f8f
|
SAME70 Xplained: Update README; switch to USART1
|
2015-11-19 12:15:13 -06:00 |
|
Gregory Nutt
|
5106a8a9ca
|
SAME70 Xplained: Updated README
|
2015-11-19 10:25:08 -06:00 |
|
Gregory Nutt
|
f4213873f3
|
board_uniqueid should return a negated errno value on failure
|
2015-11-19 10:23:01 -06:00 |
|
Gregory Nutt
|
57d84a2143
|
Merged in marawan31/boards (pull request #19)
added unique id implementation for nucleo-f303re
|
2015-11-19 10:18:29 -06:00 |
|
Marwan Ragab
|
fb0145d0c8
|
added unique id implementation for nucleo-f303re
|
2015-11-19 11:11:12 -05:00 |
|
Gregory Nutt
|
046212dc4e
|
Update README
|
2015-11-18 18:09:06 -06:00 |
|
Gregory Nutt
|
25251db103
|
SAME70-Xplained: Has only a single LED and a single push button
|
2015-11-18 16:45:29 -06:00 |
|
Gregory Nutt
|
faa9f50e53
|
Fix several build errors detected by tools/testbuil.sh, most configuration problems
|
2015-11-18 14:35:08 -06:00 |
|
Gregory Nutt
|
c154a4a1e2
|
Add basic support for the SAME70-Xplained board
|
2015-11-18 13:54:57 -06:00 |
|