SAMDL: SPI must be disabled before changing the mode bits in CTRLA register
* SAMD External Interrupt Controller (EIC) support
* removed comment
* SAMDL: SPI must be disabled before changing the mode bits in CTRLA register
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Previous commit assumed that the caller is running on CPU0.
However, the caller sometimes runs at CPU1. This patch will
assign the caller to CPU0 explicitly.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
lpc43/54 SDMMC: Wading through bits trying to make sense out of what is a event want interrupt which deal mostly with commands+responses and what is a data transfer event. DTO is the only wildcard. I think this clear now but DMA transfers will fail with CRC error.
lpc43/54 SDMMC: DTO is a wait event, not a transfer event.
lpc43/54 SDMMC: Significant simplication to previous design. More debug output.
lpc43/54 SDMMC: Don't allow duplicate events in waitmask and xfrmask.
lpc43/54 SDMMC: Not all interrupts were being disabled at the end of a transfer.
lpc43/54 SDMMC: Defer enabling DMA transfer interrupts until after command has been sent.
Squashed commit of the following:
arch/arm/src/lpc43xx: SDMMC driver now builds for the LPC43 (provided that the proper definitions appear in the board.h file).
arch/arm/src/lpc43xx: Update basic changes to the ported lpc54xx driver for lpc43xx clocking and GPIOs.
arch/arm/src/lpc43xx: Brings in the LPC54xx SD/MMC driver with absolutely no changes other than changing all occurences of 54 to 43.
arm/arm/src/lpc43xx: Add build support for the lpc54 SDMMC driver.
lpc54 SDMMC: Check for successful data transfer last. Checking first means that we miss errors.
Squashed commit of the following:
arch/arm/src/lpc54xx: SDMMC fixes.. DMA should not be enabled on non-DMA transfers, the burst setting in FIFOTH is supposed to match the burst setting in the BMOD reseters, Add DMA error interrupt support.
arch/arm/src/lpc54xx: Mostly costmetic changes to the SDMMC driver.
In lc823450, ldrex and strex are not supported. So we implemented
up_testset() with H/W Mutex. However, there was a bug in memory
access order. This change ensures correct memory access order in
up_testset() for lc823450.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
lc823450 http streaming
* arch/arm/src/lc823450: Use spinlock APIs in lc823450_gpio.c
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* arch/arm/src/lc823450: Add a warning message in up_ack_irq()
In SMP mode, H/W interrupts should be handled on CPU0 to avoid deadlocks.
Other changes:
Fix a potential race condition in up_enable_irq()
Use spinlock APIs instead of critical section APIs.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* arch/arm/src/lc823450: Enable HRT_TIMER in lc823450_timerisr.c
Other changes:
Fix style violations and call up_enable_irq() to assign CPU0 for IRQ handling.
Use spinlock APIs instead of critical section APIs.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* arch/arm/src/lc823450: Fix race conditions in dma/usbdev.
In SMP mode, critical data must be protected explicitly.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/lc823450-xgevk: Update README.txt
Add notes on .gdbinit and networking. Update comments on SMP.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/lc823450-xgevk: Update defconfigs
Enable HRT_TIMER, LC823450_MTM0_TICK, SPINLOCK_IRQ
Enable NET_TCP_RWND_CONTROL, NXPLAYER_HTTP_STREAMING_SUPPORT (rndis only)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
arch/arm/src/lpc54xx: Adds the LPC54-specific clock configuration logic to the leveraged SD/MMC driver.
arch/arm/src/lpc54xx: Leveraged SD/MMC driver builds without error but is still missing clock configuration logic.
arch/arm/src/lpc54xx: Bring in LPC43xx SD/MMC driver from https://github.com/Smoothieware/smoothie-nuttx/tree/master/nuttx/arch/arm/src/lpc43xx
arch/arm/src/lpc54xx: LCD.. Fix some miconceptions about how the video address lines are used.
arch/arm/src/lpc54xx: Fix some LCD BPP and BRG vs RGB settings.
lc823450 smp improvement
* arch/arm/src/common: Apply irq_spin APIs to modifyregXX
Replace enter_critical_section with spin_lock_irqsave.
Replace leave_critical_section with spin_unlock_irqrestore.
Please see 6150299f54 as well.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* arch/arm/src/lc823450: Do not use modifyreg32() to enable Mutex.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* arch/arm/src/lc823450: Modify IRQ control for i2s
Interrupt will be handled on CPU0 with this change.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* arch/arm/src/lc823450: Apply irq_spin APIs to dma/syscontrol/usbdev.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/lc823450-xgevk: Assign CPU1 to lpwork
This change will improve load balancing for networking with RNDIS.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* drivers/audio/wm8776.c: Improve stability in SMP mode
Apply irq_spin APIs to improbe performance.
Repeat to process a message to avoid deadlock.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/lc823450-xgevk: Enable SPINLOCK_IRQ and NXPLAYER in rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Squashed commit of the following:
arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support.
arch/arm/src/lpc54xx: Add lpc54_clrpend.c
arch/arm/src/lpc54xx: Serial driver is complete and compiles.
arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic)
arch/arm/src/lpc54xx: Fleshes out low level USART intialization.
arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half.
arch/arm/src/lpc54xx: Beginning of USART console support.
arch/arm/src/lpc54xx: Completes very basic clock configuration.
arch/arm/src/lpc54xx: Add clocking logic (still not complete)
arch/arm/src/lpc54xx: Beginning of PLL configuration logic.
arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic.
arch/arm/src/lpc54xx: Addes some SysTick logic.
arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration.
arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic.
arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file.
arch/arm/src/lpc54xx: Add FLEXCOMM header file.
arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled.
arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished)
LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files.
arch/arm/src/lpc54xx: Add (incomplete) USART header file.
Add another condition to a Kconfig; refresh a defconfig.
arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files.
configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628
arch/: Basic build directory structure for the LPC54628
arch/arm/src/xmc4/Kconfig: Define user friend I2C alias to follow other arch names
arch/arm/src/xmc4/Kconfig: Define user friend LIN alias to follow other arch names
arch/arm/src/xmc4/Kconfig: Define user friend I2S alias to follow other arch names
lc823450 smp audio
* arch/arm/src/lc823450: Remove a workaround in up_cpu_paused()
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* arch/arm/src/lc823450: Introduce g_gpio_lock to improve write performance in SMP mode.
NOTE: This is a tentative solution and should be replaced with more generic one.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* arch/arm/src/lc823450: Add a workaround in up_txready() to avoid data corruption.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/lc823450-xgevk: Enable CONFIG_SMP for audio
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/lc823450-xgevk: Update README.txt regarding SMP audio
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
1) The first enables building with CONFIG_ARCH_IDLE_CUSTOM enabled.
2) The second allows changing voltage output scaling setting and prevents enabling over-drive mode for low frequencies (STM32 F74xx, 75xx, 76xx, 77xx)
STM32, STM32 L4, and STM32 M4: USB OTGFS DMA trace output fix
STM32: Add dump buffer feature to stm32 F4 series
STM32 and STM32 L4: Fix bad USB OTGFS register address
STM32 L4: Fix typo in USB OTGFS register usage
STM32 L4: Add check in USB OTGFS driver to assure that SYSCFG is enabled
Nucleo-L496ZG: Make HSE on Nucleo-L496ZG default to enable USB
