This commit fixes at least two issues.
* Fix a build with clang on linux
```
/usr/bin/ld: cannot open linker script file nuttx.ld: No such file or directory
clang: error: linker command failed with exit code 1 (use -v to see invocation)
```
* Restore symbol renaming for clang on linux
I guess it actually depends on the linker.
For now, use CONFIG_HOST_MACOS.
This fixed the following crash seen with sim/linux built with clang.
```
#135462 0x0000000000404a81 in nxtask_exithook (tcb=0x48f310 <g_idletcb>, status=1, nonblocking=0 '\000') at task/task_exithook.c:618
#135463 0x0000000000402aed in exit (status=1) at task/exit.c:103
#135464 0x0000000000475833 in host_abort (status=1) at sim/up_hostmisc.c:48
#135465 0x000000000040e6c6 in up_assert (filename=0x47b167 "semaphore/sem_wait.c", lineno=113) at sim/up_assert.c:126
#135466 0x000000000040850b in _assert (filename=0x47b167 "semaphore/sem_wait.c", linenum=113) at assert/lib_assert.c:36
#135467 0x0000000000403a40 in nxsem_wait (sem=0x7fca38b1c2d0) at semaphore/sem_wait.c:113
#135468 0x0000000000403b43 in sem_wait (sem=0x7fca38b1c2d0) at semaphore/sem_wait.c:271
#135469 0x000000000040aad3 in lib_stream_semtake (list=0x7fca38b1c2d0) at stdio/lib_libstream.c:159
#135470 0x000000000040a8e7 in lib_flushall (list=0x7fca38b1c2d0) at stdio/lib_libflushall.c:61
#135471 0x0000000000404c3c in nxtask_flushstreams (tcb=0x48f310 <g_idletcb>) at task/task_exithook.c:520
#135472 0x0000000000404a81 in nxtask_exithook (tcb=0x48f310 <g_idletcb>, status=1, nonblocking=0 '\000') at task/task_exithook.c:618
#135473 0x0000000000402aed in exit (status=1) at task/exit.c:103
#135474 0x0000000000475833 in host_abort (status=1) at sim/up_hostmisc.c:48
#135475 0x000000000040e6c6 in up_assert (filename=0x47b167 "semaphore/sem_wait.c", lineno=113) at sim/up_assert.c:126
#135476 0x000000000040850b in _assert (filename=0x47b167 "semaphore/sem_wait.c", linenum=113) at assert/lib_assert.c:36
#135477 0x0000000000403a40 in nxsem_wait (sem=0x7fca38b1c2d0) at semaphore/sem_wait.c:113
#135478 0x0000000000403b43 in sem_wait (sem=0x7fca38b1c2d0) at semaphore/sem_wait.c:271
#135479 0x000000000040aad3 in lib_stream_semtake (list=0x7fca38b1c2d0) at stdio/lib_libstream.c:159
#135480 0x000000000040a8e7 in lib_flushall (list=0x7fca38b1c2d0) at stdio/lib_libflushall.c:61
#135481 0x0000000000404c3c in nxtask_flushstreams (tcb=0x48f310 <g_idletcb>) at task/task_exithook.c:520
```
## Summary
A lot of linker scripts were listed twice, once for unix, once for windows.
This PR cleans up the logic so they're only listed once.
## Impact
Any opportunity to use a single source of truth and reduce lines of code is a win!
## Testing
CI will test all build
`vnc_remove_queue` would waiting for new frame update request forever
even if the connection is lost, the updater thread wouldn't exit.
But the server thread will join updater thread before accept new client
connection, then we can't re-conncet to vnc server.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Summary:
- I noticed that pthread always crashes when started
if CONFIG_BUILD_KERNEL=y
- This commit fixes this issue
Impact:
- None
Testing:
- Tested with sabre-6quad:netknsh (not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
State of problem:
- Some drivers that do not support write operations (does not
have write handler or ioctl do not perform any write actions)
are registered with write permissions
- Some drivers that do not support read operation (does not
have read handler or ioctl do not perform any read actions)
are registered with read permissions
- Some drivers are registered with execute permissions
Solution:
- Iterate code where register_driver() is used and change 'mode'
parameter to reflect the actual read/write operations executed
by a driver
- Remove execute permissions from 'mode' parameter
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
The angle observer always refer to a motor electrical angle,
while the speed observer can be applied to a motor electrical speed or a motor mechanical speed.
They can be used completely independently, so they should'n be coupled.
For example, a sensored motor controller in speed control mode doesn't need an angle estimator.
If attaching to a target that is already running JLinkGDBServer calls
RTOS_GetNumThreads() without a prior call to RTOS_UpdateThreads(). So
do this within RTOS_GetNumThreads() if g_plugin_priv.ntcb has not yet
been initialized.
Note: If after attaching the debugger to the target, the target is
resumed and then stopped again, the RTOS_UpdateThreads is actually
called. Thus, we are not running on stale thread data in this case.
I also changed PLUGIN_VER to API_VER and its value to 101, as
RTOS_GetVersion() does not query the version of the plugin, but the API
version implemented by the plugin, which in our case is 1.1.
Signed-off-by: Michael Jung <mijung@gmx.net>
The packed-attribute on the tcb_info_s type was misplaced, which caused
incompatible memory layout between host and target. According to
current GCC documentation:
> You may specify type attributes in an enum, struct or union type
> declaration or definition by placing them immediately after the struct,
> union or enum keyword. You can also place them just past the closing
> curly brace of the definition, but this is less preferred because
> logically the type should be fully defined at the closing brace.
I also added jlink-nuttx.so to the .gitignore list and updated nxstyle
to ignore the camel case function names required by JLinkGDBServer.
Signed-off-by: Michael Jung <mijung@gmx.net>
Summary:
- Apply the same style as sabre-6quad
Impact:
- None
- NOTE: esp32c3-devkit still remains old style because of link errors
Testing:
- Build only
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed that the following error happened when loading the init
'elf_symvalue: SHN_COMMON: Re-compile with -fno-common'
- This commit fixes this issue
Impact:
- sabre-6quad only
Testings:
- Tested with sabre-6quad:netknsh (not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Fix the CPU1 idle tasks stack corruption since the cpux's idle stack
is loaded from g_cpu_basestack (data section) before, but on this time
it maybe not ready since it is initialized by CPU0, and the value
from g_cpu_basestack is random.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Summary:
- I received an issue report that multiwebcam in Spresense SDK 2.4.0
has a problem with the Chrome browser
- Actually, the browser tries to establish 2 connections but
the multiwebcam can handle only 1 connection. And if accept() for
the second connection is delayed, the connection no longer exists
in the gs2200m hardware
- This commit fixes this issue by checking if the cid is valid or not.
Impact:
- gs2200m driver only
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
commit 328374f4658d11655f268f968f4c6c7a3942f320
changed the wait to use usleep. This killed the
write performace from the published values in the
datasheet of ~100 us to 2 mS per 256 bits. On
a 1000 per tick config. It can be 10 X worse
on the default 100 per tick config.
This changes uses up_udelay.
This fixes error:
tools/Unix.mk:49: *** missing separator. Stop.
that can happen if version.sh is invoked on a git repository
that contains no tags.
See https://github.com/apache/incubator-nuttx/issues/5324
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
