sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
26,898 Commits 1 Branch 0 Tags 291 MiB
d2e03daeb1
Commit Graph

12191 Commits

Author SHA1 Message Date
Gregory Nutt
d2e03daeb1 Fix some strange spacing apparently introduced by tools/indent.sh 2016-09-21 16:06:05 -06:00
Gregory Nutt
54eee5b303 Review of PR 135 2016-09-21 09:36:39 -06:00
Young
cf99e50b7a Add QEI lower-half driver impl. for Tiva series chip 2016-09-21 17:08:31 +08:00
Gregory Nutt
1c20376e39 SAM GPIO: Apply Wolfgang's change for SAM3/4 to SAMA5 and SAMV7 2016-09-20 15:33:31 -06:00
Wolfgang Reißnegger
3f22b63321 SAM3/4: Fix GPIO pull-up/down code. 
Enabling the pull-down resistor while the pull-up resistor is still enabled
is not possible. In this case, the write of PIO_PPDER for the relevant I/O
line is discarded. Likewise, enabling the pull-up resistor while the
pull-down resistor is still enabled is not possible. In this case, the
write of PIO_PUER for the relevant I/O line is discarded.
 2016-09-20 13:32:04 -07:00
Gregory Nutt
ed22c93d7a Tiva Ethernet: Needs support for CONFIG_NET_MULTIBUFFER=y 2016-09-20 13:02:24 -06:00
Gregory Nutt
4dc3521743 All SAM Ethernet Drivers: Add support so that the drivers can be built with CONFIG_NET_MULTIBUFFER=y 2016-09-20 08:56:36 -06:00
Gregory Nutt
7f1a88e243 Pierre's assertion-avoidance change should also be applied to STM32 F7 and L4 2016-09-15 08:41:49 -06:00
Pierre-noel Bouteville
829de7d5bd Set USB address to avoid a failed assertion 2016-09-15 08:36:45 -06:00
Jim Wylder
5d73f114b5 STM32L4: Add support for USART3-USART5 
For STM32L4 parts, the higher number USART ports supported
varies.  Add the HAVE_USARTx definitions to the configuration
to allow enabling the higher numbered USART ports.

Signed-off-by: Jim Wylder <jwylder@motorola.com>
 2016-09-14 15:20:18 -05:00
Sebastien Lorquet
50dd745e23 restore stm32l4 name 2016-09-07 14:17:38 +02:00
Sebastien Lorquet
87d2f86968 Register renames to allow stm32l4 usb device compilation 2016-09-05 08:50:09 +02:00
David Sidrane
944902a24d F7 Usb Fix for FIFO loosing first word 2016-09-02 07:14:16 -10:00
David Sidrane
81ba54b650 Using uinfo 2016-09-02 03:50:26 -10:00
Sebastien Lorquet
e4a713477a Apply stm32 fix to stm32l4 2016-08-31 13:12:49 +02:00
Gregory Nutt
bef7f5be23 STM32 F7: Remove duplicate call to pkt_input from Ethernet driver. 2016-08-30 08:04:18 -06:00
Gregory Nutt
9c3bade7b4 net/tcp: tcp_ipvX_bind() not actually using the ported selected with port==0. Also removes duplicate call to pkt_input(). Issues noted by Pascal Speck. 2016-08-30 07:59:57 -06:00
David Sidrane
f2809d52d3 stm32_otgfsdev.c edited online with Bitbucket 
dup SOF removed as noted by Sébastien Lorquet
 2016-08-26 17:20:38 +00:00
David Sidrane
87f4a8033a BugFix:Lost first word from FIFO 
1) Do not overwrite Reserved Bits in GINTSTS (per ref manual)*
    2) Acknowledge all pending int on entry to ISR that are Only rc_w1*
    3) Do not disable RXFVL*
    4) Loop until RXFVL is cleared*
    5) Only clear the NAK on the endpoint on the OTGFS_GRXSTSD_PKTSTS_SETUPDONE to
       not loose the first WORD of FIFO all the data  (Bug Fix)

Changed marked *are just driver clean up and ensure ints are not lost.
The bug fix is #5

Test case open putty and observer the Set/Get LineCoding
Without this fix #5 the Get will not match the Set, and
infact the data might be skewed by 4 bytes, that are lost
from the FIFO if the OTGFS_DOEPCTL0_CNAK bit is set in the
OTGFS_GRXSTSD_PKTSTS_SETUPRECVD as opposed to the OTGFS_GRXSTSD_PKTSTS_SETUPDONE

Set Line Coding DATA1: 4B | 00 c2 01 00 00 00 08 | c8 1B
Get Line Coding DATA1: 4B | .. .. .. .. 00 00 08   c8 .. 00 00 07 | 7a 72
 2016-08-25 06:51:52 -10:00
Gregory Nutt
4ebace37a9 Fix typos in LPC43 serial driver. Found by Vytautas Lukenskas 2016-08-24 10:34:56 -06:00
Aleksandr Vyhovanec
6bc952a2cc STM32: Add IAR-style STM32F1xx vectors. Tested on STM32F103RB and STM32F107RC. 2016-08-24 10:10:33 -06:00
Gregory Nutt
300361539a sched/sched_cpuload_oneshot: Use the oneshot timer with optional entropy to measuer cPU load if so configured. 2016-08-20 12:47:07 -06:00
Gregory Nutt
ae37c9859f Cosmetic changes from review of PR 120 2016-08-19 06:32:28 -06:00
Michał Łyszczek
0f175039ad Fix compilation warnings for stm32 eth with certain configs 2016-08-19 09:18:18 +02:00
Gregory Nutt
c0074fd6b8 Merged in mlyszczek/nuttx/stm32butterfly2_board (pull request #118) 
add stm32butterfly2 development board
 2016-08-18 11:14:10 -06:00
Alan Carvalho de Assis
a3e1bdde14 STM32 SPI: Fix STM32F3XXX SPI driver to read 8-bit correctly. 2016-08-18 08:38:49 -06:00
Gregory Nutt
3c58e8e9b4 SAMA5: Add oneshot max_delay method 2016-08-18 08:11:40 -06:00
Gregory Nutt
d369eeec95 Remove a misleading comment 2016-08-18 07:13:04 -06:00
Gregory Nutt
01ae660c6c Merged in K-man23/nuttx/stm32_adc_fix (pull request #117) 
Change stm32 adc dma callback to send channel number instead of index
 2016-08-17 14:05:37 -06:00
Konstantin Berezenko
9b3bbc0f09 Change stm32 adc dma callback to send channel number instead of index 2016-08-17 13:02:36 -07:00
Gregory Nutt
319ad528cd Revert "sam_tc_clockselect() reworked to calculate frequency error using smallest possible divisor minimizing the frequency error rather than largest possible divisor which maximized the error." 
This reverts commit 5d5851a5cd.
 2016-08-17 12:34:54 -06:00
Michał Łyszczek
a05d9c18da Add connectivity line stm32 to be able to compile SYSCFG, add definitions for 
usb clock divs
 2016-08-17 20:11:15 +02:00
Konstantin Berezenko
42ee88fe89 STM32F411 and STM32F446 map i2c2_sda_4 to different alternate function numbers 2016-08-17 11:01:44 -07:00
Piotr Mienkowski
5d5851a5cd sam_tc_clockselect() reworked to calculate frequency error using smallest possible divisor minimizing the frequency error rather than largest possible divisor which maximized the error. 2016-08-17 09:51:54 -06:00
Gregory Nutt
17e5da96ea SAMV7: DAC1 not available GMAC is enabled 2016-08-17 07:14:59 -06:00
Gregory Nutt
e57891b41f Kinetis I2C: Review and extend I2C register definitions for K40 and K60 2016-08-16 12:17:23 -06:00
Gregory Nutt
a337494221 Kinetis I2C: Remove literal hex register values. Replace with symbolic definitions from kinetis_i2c.h 2016-08-16 11:44:04 -06:00
Gregory Nutt
7f4488dc80 Review I2C register definitions and add support for the K64 2016-08-16 10:18:52 -06:00
Gregory Nutt
a3b061e54f Kinetis: Add support for I2C2 2016-08-16 10:02:28 -06:00
Gregory Nutt
be83e73957 Kinetis I2C: Add comments, DEBUGASSERTions, and some I2C debug output. 2016-08-16 08:42:30 -06:00
Gregory Nutt
32c1189f51 Re-order some fields so that the structure packs better and so is smaller. 2016-08-16 08:20:55 -06:00
Gregory Nutt
f40bb14495 Kinetis: Add support for I2C1 2016-08-16 07:21:03 -06:00
Gregory Nutt
b2be0be3a6 Simulated oneshot max_delay() method should not return a failure. 2016-08-15 11:43:55 -06:00
Gregory Nutt
3f48392974 Add defaults in SAMV7 configuration for all DAC settings 2016-08-15 10:22:12 -06:00
Gregory Nutt
e53118ffc2 SAMV7 DAC configuration needs some conditional logic 2016-08-15 08:55:11 -06:00
Gregory Nutt
c367e4985f Add configuration logic for the SAMV7 DAC module 2016-08-15 08:21:46 -06:00
Piotr Mienkowski
053aea552f Add support for SAMV7 DACC module 2016-08-15 08:00:36 -06:00
Gregory Nutt
f84780f36e Changes from review of PR 114 2016-08-14 13:38:47 -06:00
Gregory Nutt
2b32869b49 Merged in v01d/nuttx/kinetis-i2c-norestart (pull request #114) 
support NORESTART on kinetis i2c
 2016-08-14 13:27:39 -06:00
v01d
239c56f3b9 support NORESTART 2016-08-14 16:25:18 -03:00