Summary:
- I noticed that irq is enabled explicitly in arm64_cpu_idle.S
- The code is unnecessary since tasks, including the idle task,
are created with irq enabled in up_initial_state()
Impact:
- Should be none
Testing:
- qemu-armv8a:netnsh_smp_hv with qemu-7.2.4
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Before code is executed after being loaded into memory,
it is necessary to ensure the consistency of I and D cache.
The up_coherent_dcache function will flush the dache and
invalidate the icache to ensure cache consistency.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Only when SCTLR_ELn.WXN is set to 1, regions that are writable at ELn
are treated as non-executable. Therefore, when SCTLR_ELn.WXN is set to
0, regions that are writable at ELn can be executed, so the writable
attribute cannot be used to restrict the executable attribute.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
To compile arm64 NuttX, use the following command:
./tools/configure.sh -l qemu-armv8a:nsh_fiq
To run，use the following command
qemu-system-aarch64 -cpu cortex-a53 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
The BIT macro is widely used in NuttX,
and to achieve a unified strategy,
we have placed the implementation of the BIT macro
in bits.h to simplify code implementation.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
When we build NuttX on macOS, it shows many `sed` messages (and the build still completes successfully):
```text
$ tools/configure.sh pinephone:nsh
$ make
sed: illegal option -- r
```
This is due to the Makefiles executing `sed -r` which is not a valid option on macOS.
This PR proposes to change `sed -r` to `sed -E` because:
- `sed -E` on macOS is equivalent to `sed -r` on Linux
- `sed -E` and `sed -r` are aliases according to the GNU `sed` Manual
- `sed -E` is already used in nuttx_add_romfs.cmake, nuttx_add_symtab.cmake and process_config.sh
test config: ./tools/configure.sh -l qemu-armv8a:nsh_smp
Pass ostest
No matter big-endian or little-endian, ticket spinlock only check the
next and the owner is equal or not.
If they are equal, it means there is a task hold the lock or lock is
free.
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
Co-authored-by: Xiang Xiao <xiaoxiang781216@gmail.com>
Summary
Add ARM PCSI (Power State Coordination Interface) Support
for qemu. With the interface, Poweroff/PowerReset can be support
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Summary:
Adding virtual evaluate platform GoldFish. Which is based on
Android Goldfish Emulator, it's a ARM virt board but Android enhance
it with more featue
The patch set goldfish as a chip
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Summary
when using new gcc verion like:
GNU ld (Arm GNU Toolchain 12.2.Rel1 (Build arm-12.24)) 2.39.0.20221210)
we will get link warning like:
aarch64-none-elf-ld: warning: XXX/nuttx has a LOAD segment with RWX permissions
The patch fix the warning through add link option --no-warn-rwx-segments
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Pinephone Pro port just nsh
Status:
booting till GICD / IRQ issue
style cleanups
start to fix style checks
revert offset
whitespaces
revert a64 bringup file
prob last cleanup
more cleanups
remove dts
move changes from a64 hardware specific folders to rk3399
undo common changes (except head.s)
revert gitignore
missing irq.h and rk3399_serial.c need to finish cleaning them up
WIP
add source for load address
make debug print hex again add board include
Pinephone Pro port just nsh
Status:
booting till GICD / IRQ issue
style cleanups
start to fix style checks
revert offset
whitespaces
revert a64 bringup file
prob last cleanup
more cleanups
remove dts
move changes from a64 hardware specific folders to rk3399
undo common changes (except head.s)
revert gitignore
missing irq.h and rk3399_serial.c need to finish cleaning them up
WIP
add source for load address
remove ccache, add board memory map
remove board reset
Summary
this is a old implement for Arm64 trace but will failed
compile when enable CONFIG_SCHED_INSTRUMENTATION_SWITCH
remove it since it will never use for trace framework
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
