sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
29,893 Commits 1 Branch 0 Tags 291 MiB
d5acc050cc
Commit Graph

193 Commits

Author SHA1 Message Date
Gregory Nutt
01b0a56371 TCP: tcp_input() now receives IP domain as an input parameter vs. deriving from the IP header length. 2017-05-25 08:02:08 -06:00
Masayuki Ishikawa
32a638cdfe TCP: Fix tcp_findlistner() in dual stack mode 
Signed-off-by: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>
 2017-05-25 16:54:19 +09:00
Gregory Nutt
56c8456ff0 Update some comments. 2017-05-16 07:38:57 -06:00
Gregory Nutt
914c5dad0c TCP: An RST recevied suring the 3-way handshake requires a little more clean-up 2017-05-15 08:10:43 -06:00
Gregory Nutt
aa57fb159d TCP: Send RST if applicaiton 'unlistens()' before we complete the connection sequence. 2017-05-14 13:30:59 -06:00
Gregory Nutt
8acfea1197 Fix some typos 2017-05-14 12:14:31 -06:00
Gregory Nutt
d339ba9e0e TCP: Fix some potential error conditions that could result from deferring the connection until the full 3-way handshake has completed. 2017-05-14 10:56:25 -06:00
Simon Piriou
8dc7f6d79e tcp: wait for 3-Way Handshare before accept() returns 2017-05-14 09:08:32 -06:00
Gregory Nutt
0de294a586 Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they. 2017-05-11 13:35:56 -06:00
Gregory Nutt
2043e1a114 IOBs: Move from driver/iob to a better location in mm/iob 2017-05-09 07:35:30 -06:00
Gregory Nutt
d5207efb5a Be consistent... Use Name: consistent in function headers vs Function: 2017-04-21 16:33:14 -06:00
Gregory Nutt
bfb93338f6 Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled. 2017-04-20 16:08:49 -06:00
Gregory Nutt
bcc6b61fc1 Move include/nuttx/net/iob.h to include/drivers/iob.h; rename CONFIG_NET_IOB to CONFIG_DRIVERS_IOB 2017-04-20 14:53:30 -06:00
Gregory Nutt
7cb34d969d 6loWPAN: More fixes from early debug. 2017-04-03 15:25:36 -06:00
Gregory Nutt
1b6630ee75 6loWPAN: Fix compile errors and warnings when building the complete 6loWPAN configuration. 2017-04-02 17:46:22 -06:00
Gregory Nutt
76406af71b 6loWPAN: Add support for sendto() 2017-04-02 11:15:46 -06:00
Gregory Nutt
732f0855c6 6loWPAN: Fleshes out framwork for IEEE802.15.4 send. But still has some gaping holes. 2017-03-31 15:09:07 -06:00
Jussi Kivilinna
cd3c9634c8 Add user-space networking stack API (usrsock) 
User-space networking stack API allows user-space daemon to
provide TCP/IP stack implementation for NuttX network.

Main use for this is to allow use and seamless integration of
HW-provided TCP/IP stacks to NuttX.

For example, user-space daemon can translate /dev/usrsock
API requests to HW TCP/IP API requests while rest of the
user-space can access standard socket API, with socket
descriptors that can be used with NuttX system calls.
 2017-03-31 08:58:14 -06:00
Gregory Nutt
64933246c3 6loWPAN: Tie 6loWPAN send into common socket send logic. 2017-03-28 14:08:54 -06:00
Gregory Nutt
ba2b345990 Remove a few remaining use of the obsolteted 'Compilation Switches' program section 2017-01-22 08:57:18 -06:00
Gregory Nutt
9f7d332028 Minor changes from the review of the last PR 2017-01-18 07:32:27 -06:00
Pascal Speck
2e074ca4f9 - Fixed some issues that prevented ipv6 to work with ipv4 enabled. 2017-01-18 10:57:15 +01:00
Gregory Nutt
7467329a98 Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed. 2016-12-03 16:28:19 -06:00
Gregory Nutt
2d057c28c8 net: Disable priority inheritance on all semaphores used for signaling 2016-11-03 12:17:02 -06:00
Gregory Nutt
9c3bade7b4 net/tcp: tcp_ipvX_bind() not actually using the ported selected with port==0. Also removes duplicate call to pkt_input(). Issues noted by Pascal Speck. 2016-08-30 07:59:57 -06:00
Gregory Nutt
2a751068e6 Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err(). 2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72 Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn(). 2016-06-20 09:37:08 -06:00
Gregory Nutt
2b445ddccc Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces. 2016-06-20 08:57:08 -06:00
Jakub Łągwa
338b915008 While working with version 7.10 I discovered a problem in TCP stack that could be observed on high network load. Generally speaking, the problem is that RST flag is set in unnecessary case, in which between loss of some TCP packet and its proper retransmission, another packets had been successfully sent. The scenario is as follows: NuttX did not receive ACK for some sent packet, so it has been probably lost somewhere. But before its retransmission starts, NuttX is correctly issuing next TCP packets, with sequence numbers increasing properly. When the retransmission of previously lost packet finally succeeds, tcp_input receives the accumulated ACK value, which acknowledges also the packets sent in the meantime (i.e. between unsuccessful sending of lost packet and its proper retransmission). However, variable unackseq is still set to conn->isn + conn->sent, which is truth only if no further packets transmission occurred in the meantime. Because of incorrect (in such specific case) unackseq value, few lines further condition if (ackseq <= unackseq)is not met, and, as a result, we are going to reset label. 2016-06-20 06:55:29 -06:00
Gregory Nutt
7d0950bb22 net/: Change some nerr() ERRORS to nwarn() WARNINGS. Anomolous network events are not errors. 2016-06-12 07:09:37 -06:00
Gregory Nutt
f4fcdcdb4d net/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-11 17:37:21 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
86b79b33cf Reserver the name 'err' for other purposes 2016-06-11 14:40:07 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Gregory Nutt
c98f00a93b Update comments; trivial addtion to a document. 2016-06-10 09:36:59 -06:00
Gregory Nutt
4f208600aa Replace confusing references to uIP with just 'the network' 2016-05-30 09:31:44 -06:00
Gregory Nutt
2dd9777c7e Fix a backward conditional test introduced with the last commit 2016-03-20 09:58:07 -06:00
Gregory Nutt
00b44959ea TCP poll: TCP poll events can really only being processed when the poll from the correct device is received. 2016-03-20 08:39:15 -06:00
Gregory Nutt
4639cdd894 TCP timeouts: Fix some logic when there are multiple network interfaces. In this case, TCP timeout events can really only being processed when the poll from the correct device is received. 2016-03-20 08:19:00 -06:00
Gregory Nutt
2c95fef501 Remove some empty code section comments 2016-02-26 07:35:55 -06:00
Gregory Nutt
8db55f6493 Back out most of previous commit 2016-02-26 06:45:37 -06:00
Gregory Nutt
0b441ff1f4 net/: Add basic IEEE 802.15-4 socket support 2016-02-25 14:01:22 -06:00
Gregory Nutt
0fb035f76b Standardize some naming in code section comments 2016-02-21 18:09:04 -06:00
Andrew Webster
49e5cc5a6f TCP: check for an active connection before cleaning it up 
If there is no active connection (e.g. it is waiting in accept), then
the connection object, which doesn't yet exist, should not be cleaned
up when the socket is closed.
 2016-01-22 16:22:09 -06:00
Andrew Webster
5e3023bef1 TCP: return from write when there is no buffer space 
During a write, if there is no more buffer space for the user data,
return the amount that was written instead of waiting until there
is free space.  If nothing has been written yet, then block as before.

This solves a deadlock that occurs if the user data is too large to
fit in the available buffer:  the write thread will block before any
data is added to the write queue, leaving no possibility that more
buffers will free up when they are ACKed (since they have not yet been
sent).  The write thread will then block forever and hold all of the
buffers.
 2016-01-22 16:19:20 -06:00
Andrew Webster
cdd187a7f3 TCP: check for sndcb before using it 2016-01-22 15:54:45 -06:00
Andrew Webster
df211ee46a TCP: add writable check during poll 
When a poll requesting POLLOUT happens, the poll should return
immediately if a write will not block.  This change adds that, as
opposed to the old behaviour of blocking until a timer from the
Ethernet driver eventually triggers the poll to complete.

This is only implemented for buffered TCP.  Unbuffered TCP should
behave as before.
 2016-01-22 15:52:14 -06:00