sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
36,509 Commits 1 Branch 0 Tags 291 MiB
d624434282
Commit Graph

76 Commits

Author SHA1 Message Date
kyChu
db49e62118 Merged in kyChuGit/nuttx/aht10_sensor (pull request #1084) 
add new driver support for the ASAIR AHT10 temperature and humidity sensor

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-02 14:36:09 +00:00
Matous Pokorny
925d16b7b8 drivers/sensors/isl29023.c: Add basic driver of ISL29023 ambient light sensor. The basic driver can set operational mode, range, and resolution. It can also read lux value in continuous mode. Interrupt and the alarm is not implemented. 2019-09-04 11:26:26 -06:00
Augusto Fraga Giachero
d6ad7ebd47 drivers/sensors/adt7320.c: Add support for the ADT7320 temperature sensor. 2019-08-28 15:35:43 -06:00
Markus Bernet
1e0987a729 drivers/sensors/sht3x.c: Add Sensirion SHT3x driver. 2019-08-08 07:34:15 -06:00
Juan Flores
d2e884f43c drivers/sensors/vl53l1x.c: Added support for VL53L1X TOF sensor. 2019-07-10 07:58:20 -06:00
Alin Jerpelea
ffb4f00da9 Merged in alinjerpelea/nuttx (pull request #944) 
drivers: sensors: add I2C Bosch BMP280 and I2C Asahi AK09911/AK09912 Compass Sensor

* drivers: sensors: add Bosch BMP280 Barometic Pressure Sensor

    add driver for the Bosch BMP280 barometic pressure sensor
    This sensor is connected over I2C bus

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: sensors: add Asahi AK09911/AK09912 Compass Sensor

    add driver for AK09911/AK09912 Compass sensor over I2C bus

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-07-10 11:31:36 +00:00
Gregory Nutt
c2a383ef6d drivers/sensors/vl53l1x.c: Remove the VL53L1x driver. It does not compile. 2019-06-29 06:26:49 -06:00
Juan Flores
f466d054a1 drivers/sensors/vl53l1x.c: Add support for VL53L1X TOF sensor. 2019-06-28 08:17:35 -06:00
Alin Jerpelea
977893d5a7 Merged in alinjerpelea/nuttx (pull request #912) 
configs: spresense: enable BMI160_I2C sensor

* drivers: sensors: add BMI160 driver

    Enable driver support for the Bosch BMI160 Inertial
    Measurement sensor

    This driver can be used with the BMI160 sensor connected over
    SPI or I2C bus

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* configs: spresense: enable BMI160_I2C sensor

    Enable BMI160 sensor connected over I2C on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-06-20 13:32:36 +00:00
Fabian Justi
ff5f1945ec Merged in Justifa/nuttx (pull request #883) 
Add support for AS726X spectral sensor

* configs/nucleo-l476rg/src/stm32_appinit.c Add I2C tool to board init

* configs/nucleo-l476rg/src/stm32_bmp180.c Fix comment

* configs/stm32f103-minimum/src/stm32_veml6070.c Fix name in error message

* drivers/sensor, include/nuttx/sensors and configs/nucleo-l476rg: Add support for AS726X spectral sensor

    Implement driver for AS726X spectral

    read as726x V,B,G,Y,O,R channel

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-06-05 12:50:03 +00:00
Bill Gatliff
a8744defe2 drivers/sensors/mpu60x0.c: Initial support for TDK InvenSense MPU6000 and MPU6050 6-axis gyroscope and accelerometers. This commit supports SPI media only. 2019-03-07 16:50:37 -06:00
Jussi Kivilinna
d4a38a8974 Merged in jussi_kivilinna/nuttx/sensirion_drivers (pull request #809) 
Drivers for Sensirion SCD30, SGP30 and SPS30 sensors

* drivers/sensors: add driver for Sensirion SCD30 CO2 sensor

* drivers/sensors: add driver for Sensirion SGP30 gas sensor

* drivers/sensors: add driver for Sensirion SPS30 particulate matter sensor

Approved-by: GregoryN <gnutt@nuttx.org>
 2019-01-09 13:35:44 +00:00
Alan Carvalho de Assis
9689448d2a drivers/sensors/mlx90614.c: Add support for the Infrared Thermometer MLX90614 2018-10-28 15:58:14 -06:00
Daniel P. Carvalho
3abe871a80 drivers/sensors/ina226.c: Add INA226 device driver. 2018-10-19 09:04:56 -06:00
Ouss4
adda352b15 drivers/sensors/dhtxx.c: Driver for DHTxx sensor. 2018-09-01 07:25:30 -06:00
DisruptiveNL
cd2ced4d9a drivers/sensors and configs/nucleo-l476g: Add support for LSM303AGR and LSM6DSL sensors 2018-08-25 08:19:31 -06:00
Gregory Nutt
b8665996d5 Revert 0eff3d530f: This removes the kx224, bh1749nuc and bh1790glc. These are very nicely written drivers, but they are based on some external sequencer logic which is not available to everyone. Hence, these are inapropriate to carry in the NuttX repository. 2018-07-11 15:36:33 -06:00
Gregory Nutt
235d580984 drivers/sensors/bh1749nuc.c, bh1790glc.c, and x224.c: From review of commit 0eff3d530f, remove dependency on the CXD56_SCU, modify inclusions and some naming for compatibility with other sensor drivers. 2018-07-10 16:16:15 -06:00
Juho Valkama
0eff3d530f Merged in jutava/nuttx (pull request #673) 
Master

* drivers/sensors: added drivers for kx224, bh1749nuc and bh1790glc

    They are reliant on the cxd56_scu.

* drivers/sensors: Added drivers for kx224, bh1749nuc and bh1790glc

    They are reliant on the cxd56_scu.

* drivers/sensors: Added drivers for kx224, bh1749nuc and bh1790glc

    They are reliant on the cxd56_scu.

* drivers/sensors: Added drivers for kx224, bh1749nuc and bh1790glc

    They are reliant on the cxd56_scu.

* drivers/sensors: Added drivers for kx224, bh1749nuc and bh1790glc

    They are reliant on the cxd56_scu.

* drivers/sensors: Added drivers for kx224, bh1749nuc and bh1790glc

    They are reliant on the cxd56_scu.

* bh1790glc.h created online with Bitbucket

* bh1790glc.h deleted online with Bitbucket

* drivers/sensors: Added drivers for kx224, bh1749nuc and bh1790glc

    They are reliant on the cxd56_scu.

* drivers/sensors: Added drivers for kx224, bh1749nuc and bh1790glc

    They are reliant on the cxd56_scu.

* README.txt: minor typo fix

* Minor typo fix

Approved-by: GregoryN <gnutt@nuttx.org>
 2018-07-10 12:38:25 +00:00
Juha Niskanen
5b899b76c4 drivers/sensors: Add support for Telair T6713 carbon dioxide sensor 2018-06-15 06:52:16 -06:00
Anthony Merlino
b1275abd4b Merged in antmerlino/nuttx/ina3221 (pull request #636) 
drivers/sensors: Adds support for INA3221 power sensor. This has a 3 channel bus/shunt voltage pairs.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-05-02 22:29:59 +00:00
Bob Feratich
d893c5b55e This commit adds LSM330 SPI and ADXL372 drivers. 
Squashed merge of the following:

Author: Gregory Nutt <gnutt@nuttx.org>
    drivers/sensors:  Fix some minor typos in last commit that cause some compile problems.
    drivers/sensors/:  Clean up some coding standard isses in LM330 and ADXL372 drivers.
    drivers/sensors/README.txt:  Clean up some long lines and odd line breaks.
    include/nuttx/sensors:  Completes coding style review of adxl372.h, cluster_driver.h, and lsm330.h.

Author: Bob Feretich <bob.feretich@rafresearch.com>
    Add LSM330 SPI and ADXL372 drivers along with the cluster driver infrastructure.
 2018-04-07 14:47:27 -06:00
Juha Niskanen
c268288c17 drivers/sensors: Add support for Sensirion SHT2x humidity sensor 2018-03-13 08:26:15 -06:00
Matt Thompson
e79e2e2d97 Merged in extent3d/nuttx/lis3dh (pull request #598) 
Added support for LIS3DH accelerometer sensor.

* Added support for LIS3DH accelerometer sensor.

* Fix line length

* Fix more line lengthts

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-02-13 19:00:29 +00:00
Juha Niskanen
dafa72edc3 drivers/sensors: add support to MAX44009 ambient light sensor 2018-01-29 07:56:06 -06:00
Alan Carvalho de Assis
3268a6ac5f drivers/sensor: Add driver for the APDS-9960 gesture sensor 2017-10-20 06:37:38 -06:00
Sebastien Lorquet
d16d4d5568 The INA219 is a combined voltage and current sensor that can measure up to 26 volts and a current that depends on an external shunt resistor. Connection happens via i2c/smbus and the chip features a power supply rail that is independent from the measured voltage, so it can measure low voltages. 
This commit adds a driver for this chip.  Right now it measures bus voltage and current, and does not use the internal calibrated current reading, nor the available power measurement.
 2017-10-10 17:03:56 -06:00
Gregory Nutt
5129aeefd5 drivers/sensors: Fix remaining naming of configurations to be compliant for two more drivers. 2017-08-24 10:48:20 -06:00
Gregory Nutt
dc8f3778a9 drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go. 2017-08-24 10:26:53 -06:00
Gregory Nutt
1f023fa31a drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go. 2017-08-24 10:10:00 -06:00
Gregory Nutt
269107afc8 drivers/sensors: Make naming configuration compliant for two more drivers. Still several to go. 2017-08-24 09:54:23 -06:00
Gregory Nutt
7f4af7b690 drivrs/sensors: Make a few other configuration settings consistent with the (undocumented) standard. 2017-08-24 09:45:46 -06:00
Gregory Nutt
9e386e3b31 drivrs/sensors/hts221: Fix inconsistent configuration variable naming; Try to bring closer to an as-of-yet undocumented naming convention. 2017-08-24 09:22:36 -06:00
Alan Carvalho de Assis
50e2e08742 drivers/sensors: Add support to HC-SR04 distance sensor 2017-08-17 18:52:54 -06:00
Giorgio Groß
b55ec110f2 Add driver for LTC4151 current and voltage monitor 2017-07-28 13:05:56 +02:00
Floxx
c2096f17d6 Moved LIS3DSH from the I2C-dependent block to the SPI-block to make Make.defs consistent with the driver (SPI only) and drivers/sensors/Kconfig. 2017-05-10 20:18:48 +02:00
Juha Niskanen
dfe6a672c1 drivers/sensors: Add driver for ST LIS2DH accelerometer. From Timo Voutilainen <time.voutilainen@haltian.com> et al. 2017-04-03 07:28:22 -06:00
Juha Niskanen
b5b148fef8 drivers/sensors: Add driver for ST LPS25H pressure sensor 2017-03-31 05:53:43 -06:00
Juha Niskanen
9e2b3da3e8 drivers/sensors: Add driver for ST HTS221 humidity sensor 2017-03-30 12:17:23 -06:00
raiden00
82cb38c824 drivers/sensors: Add driver for the ST L3GD20 3 axis gyro 2017-02-19 17:43:44 +01:00
Gregory Nutt
e29b50e00a Fix recurring naming problem: KXTJ9 vs KXJT9. 2017-02-18 08:08:41 -06:00
Alan Carvalho de Assis
a6b7730f8c Add Vishay VEML6070 driver and support for STM32F103-Minimum board 2016-11-13 11:44:28 -06:00
Alan Carvalho de Assis
61980caee5 drivers/sensors: Adds support for the Sensixs XEN1210 3D-boar. This sensor is used on NANOSATC-BR2 a Brazillian CUBESAT project. 2016-09-16 12:45:53 -06:00
Alexander Entinger
221fcfd8f1 drivers/sensors: Add driver for the Bosch BMG160 3 axis gyroscop. 2016-08-24 09:41:04 -06:00
Alexander Entinger
0044910e33 drivers/sensors: Add driver for the LIS3DSH 3 axis accelerometer. 2016-08-24 08:28:45 -06:00
Entinger Alexander
b29287b022 drivers/sensors: Add driver for the MLX90393 3 axis magnetometer. 2016-08-23 10:48:08 -06:00
Entinger Alexander
338bf8c9e3 drivers/sensors: Add drvier for the LIS3MDL 3 axis magnetometer 2016-08-23 08:22:47 -06:00
Gregory Nutt
c32d40fd7d KXJT9 Accelerometer driver from the Motorola Moto Z MDK 2016-08-02 10:38:14 -06:00
Alan Carvalho de Assis
7f5339ee5a drivers/sensors/h1750fvi.c: Add a character driver for Rohm Ambient Light Sensor BH1750FVI. 2016-04-15 08:16:16 -06:00
Gregory Nutt
b54cf004f3 Update ChangeLog 2016-01-17 15:15:01 -06:00