* boards/arm/stm32/b-g474e-dpow1/README.txt:
(Debugging): OpenOCD requires permissions for certain operations. The
preferred thing to do is to properly configure udev rules. The
expedient thing to do is to run it as root with 'sudo', but we do not
want to encourage that, as discussed earlier on this PR [1]. This
revised text offers a compromise where we mention both options, but
we talk about udev rules first and explicitly say that using 'sudo'
is not encouraged. We leave it up to developers to decide what is
best in their particular situation.
References:
[1] https://github.com/apache/incubator-nuttx/pull/7177
* boards/arm/stm32/b-g474e-dpow1/configs/ostest/defconfig:
New file. Compared to b-g474e-dpow1:nsh, it adds the following
configs:
+CONFIG_BUILTIN=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_TESTING_OSTEST=y
and, because ostest currently fails when priority inheritance is
enabled, it removes the following configs:
-CONFIG_PRIORITY_INHERITANCE=y
-CONFIG_PTHREAD_MUTEX_DEFAULT_PRIO_INHERIT=y
1. some arm instructions are not compatible with arch tlsr:
{standard input}: Assembler messages:
{standard input}:53: Error: bad instruction `svc #0'
2. remove unsupport compile option
cc1: error: unrecognized command line option "-mlittle-endian"
Signed-off-by: chao an <anchao@xiaomi.com>
1.
make[1]: *** No rule to make target 'tms570_spi.c', needed by '.depend'. Stop.
2.
In file included from armv7-r/arm_gicv2.c:36:
armv7-r/gic.h: In function 'arm_gic_nlines':
armv7-r/mpcore.h:63:29: error: 'CHIP_MPCORE_VBASE' undeclared (first use in this function)
63 | #define MPCORE_ICD_VBASE (CHIP_MPCORE_VBASE+MPCORE_ICD_OFFSET)
| ^~~~~~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
Add support for MCUBoot.
Two new configurations are added:
- mcuboot-loader: mcuboot-loader app used as a bootloader.
main_mcuboot_loader as entrypoint
- mcuboot-app: used as mcuboot agent app. Needs to be
signed manually through "imgtool sign --pad --align 4 -v 0 -s
auto -H 0x200 --pad-header -S 0xc0000 nuttx.hex nuttx_sign.bin"
Signed-off-by: Andres Sanchez <tito97_sp@hotmail.com>
Simplify the clock mode from the board.h -files. Also make the
SD clock definable as well.
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Some related products, such as Aries m100pfs, don't support eMMC
speeds up to 200MHz. Thus, provide option to select slower clock.
This has only to do with the clocking, no CMD6 is sent to select
high speed modes.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
since we can query this value by MTDIOC_ERASESTATE after:
commit 30cb497fe1
Author: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Date: Tue Jul 13 19:33:12 2021 -0300
mtd: Add MTDIOC_ERASESTATE command for retrieving erase state value
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Modify the file according to the checks
update the board config files, and modify the gd32f4xx_progmem.c
Add chip GD32F450 of GD32MCU
delete the micro FAR, modify code style
Add chip GD32F450 of GD32MCU
* boards/arm/tiva/tm4c129e-launchpad: New subdirectory providing
board support for the Texas Instruments TM4C Crypto Connected
LaunchPad, or more correctly the EK-TM4C129EXL.
* Documentation/introduction/detailed_support.rst,
Documentation/introduction/supported_platforms.rst,
boards/README.txt: Document the additional board support.
* boards/Kconfig:
(ARCH_BOARD_TM4C129E_LAUNCHPAD): New config.
(ARCH_BOARD): Add tm4c129e-launchpad.
(Board-Specific Options): Source the board-specific Kconfig
boards/arm/tiva/tm4c129e-launchpad/Kconfig when selected.
The underlying hardware supports 9 endpoints:
- EP0
- 4x IN EPs
- 4x OUT EPs
Currently the driver assumes every EP number is unique. This limits
the amount of EPs to 1 + 4 = 5. Utilize the EPs in such a manner
that all may be used.
Also fix a few error handling related bugs. Update the composite
driver to match the current situation as well.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
NuttShell (NSH) NuttX-10.4.0
nsh> usrsocktest
Starting unit-tests...
Testing group "char_dev" =>
Group "char_dev": [OK]
Testing group "no_daemon" =>
Group "no_daemon": [OK]
Testing group "basic_daemon" =>
Group "basic_daemon": [OK]
Testing group "basic_connect" =>
Group "basic_connect": [OK]
Testing group "basic_connect_delay" =>
Group "basic_connect_delay": [OK]
Testing group "no_block_connect" =>
Group "no_block_connect": [OK]
Testing group "basic_send" =>
Group "basic_send": [OK]
Testing group "no_block_send" =>
Group "no_block_send": [OK]
Testing group "block_send" =>
Group "block_send": [OK]
Testing group "no_block_recv" =>
Group "no_block_recv": [OK]
Testing group "block_recv" =>
Group "block_recv": [OK]
Testing group "remote_disconnect" =>
Group "remote_disconnect": [OK]
Testing group "basic_setsockopt" =>
Group "basic_setsockopt": [OK]
Testing group "basic_getsockopt" =>
Group "basic_getsockopt": [OK]
Testing group "basic_getsockname" =>
Group "basic_getsockname": [OK]
Testing group "wake_with_signal" =>
Group "wake_with_signal": [OK]
Testing group "multithread" =>
Group "multithread": [OK]
Unit-test groups done... OK:17, FAILED:0, TOTAL:17
-- number of checks made: 3589
HEAP BEFORE TESTS:
total used free largest
Mem: 67108368 283088 66825280 66825216
HEAP AFTER TESTS:
total used free largest
Mem: 67108368 623408 66484960 66483360
Signed-off-by: chao an <anchao@xiaomi.com>
* Update WAMR version
* Enable CONFIG_INTERPRETERS_WAMR_DEBUG_INTERP
(TCP related config changes in this commit are for this)
* Enable CONFIG_MM_DUMP_ON_FAILURE
* Bump CONFIG_NSH_LINELEN
