sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
35,772 Commits 1 Branch 0 Tags 291 MiB
d80d6b8774
Commit Graph

261 Commits

Author SHA1 Message Date
raiden00pl
d80d6b8774 Merged in raiden00/nuttx_nrf52 (pull request #1098) 
nrf52 updates

arch/arm/nrf52: add more options to Kconfig

arch/arm/nrf52: cosmetics changes to some files

arch/arm/nrf52: nfct, radio, twi, spi registers definitions

arch/arm/nrf52: fix warnings in nrf52_gpio.c

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-19 15:40:56 +00:00
Masayuki Ishikawa
466ab56c10 Merged in masayuki2009/nuttx.nuttx/fe310_gpio (pull request #1097) 
fe310 gpio

* arch: risc-v: Add arch/risc-v/src/common/up_mdelay.c

* arch: risc-v: Add arch/risc-v/src/common/up_udelay.c

* arch: fe310: Add #include <stdint.h> to fe310_start.c

* arch: risc-v: Add up_ack_irq() definition to commpn/up_internal.h

* arch: fe310: Add FE310 GPIO driver

* boards: hifive-revb: Add compiler optimization

* boards: hifive1-revb: Add auto leds related files.

* arch: fe310: Add CPU activity led to fe310_idle.c

* boards: hifive-revb: Add a button

    NOTE: still having a trouble in signal handling.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-19 04:59:30 +00:00
raiden00pl
a0429bcb20 Merged in raiden00/nuttx_nrf52 (pull request #1096) 
nrf52 updates

board/arm/nrf52/nrf52832-dk: use the on-board virtual COM pins as default UART0 configuration

board/arm/nrf52: initial support for the nrf52840-dk board

board/arm/nrf52: initial support for the nrf52840-dk dongle board

arch/arm/src/nrf52: add support for port 1 GPIO

arch/arm/src/nrf52: initial support for UART1

arch/arm/src/nrf52: add UICR definitions

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-16 18:35:45 +00:00
Xiang Xiao
af5d0d3157 boards/sim/sim/sim/src/sim_bringup.c: Simulator shouldn't assume that graphics stack is enabled if both X11 framebuffer and touchscreen driver turn on. 2019-12-16 08:57:40 -06:00
chao.an
3c472dcf52 boards/sim/sim/sim/src/sim_bringup.c: Force format little fs before mount. 2019-12-16 08:55:35 -06:00
Gregory Nutt
541bfe9a5e Revert "boards/arm/am335x/beaglebone-black/src/am335x_bringup.c: CAN0 and CAN1 reversed in one place. Spotted by Alan Carvahlo de Assis." 
Logic was correct as originally submitted.

This reverts commit 77eea3dd66.
 2019-12-16 07:55:08 -06:00
Gregory Nutt
77eea3dd66 boards/arm/am335x/beaglebone-black/src/am335x_bringup.c: CAN0 and CAN1 reversed in one place. Spotted by Alan Carvahlo de Assis. 2019-12-15 17:51:46 -06:00
Alan Carvalho de Assis
787128930f arch/arm/src/samd2l2 and boards/arm/samd2l2/arduino-m0: Add support to SAMD2L ADC driver and board support to Arduino M0. 2019-12-15 17:36:59 -06:00
Petro Karashchenko
871197b4ec arch/arm/src/am335x/ and boards/arm/am335x/beaglebone-black/: Initial CAN support for the BBB. 2019-12-15 17:12:54 -06:00
Minamiya Natsuki
0357115bf9 Merged in MinamiyaNatsuki/nuttx (pull request #1095) 
Remove duplicate code from stm32_bringup.c

This code repeated two times by mistake.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-15 12:21:28 +00:00
Alan Carvalho de Assis
3840889b11 boards/arm/stm32/stm32f103-minimum/: Add support to LCD1602 using PCF8574 Backpack board. 2019-12-13 12:10:17 -06:00
chao.an
0d2afbd5cb boards/sim/sim/sim/configs/loadable/defconfig: Update the mount() point of hostfs. 2019-12-13 08:30:34 -06:00
Xiang Xiao
80d4072bf4 boards/sim/sim/sim/src/sim_bringup.cTry to mount /dev/rammtd if CONFIG_FS_LITTLEFS is enabled. 2019-12-13 08:05:04 -06:00
Xiang Xiao
a6c0c88ac6 boards/sim/sim/sim/configs/: Run make olddefconfig for all simulator config 2019-12-12 11:19:46 -06:00
David Sidrane
eb2bcfc44f boards/arm/imxrt/imxrt1020-evk/include/board.h: Enable the GPIO based CD. 2019-12-12 08:34:58 -06:00
David Sidrane
2cbcb8fd00 arch/arm/src/imxrt/imxrt_clockconfig.c and board.h: Allow clock setting for SPI and I2C from board.h. 2019-12-12 08:33:05 -06:00
Nathan Hartman
9655730ef8 Fix various typos and spelling errors. 2019-12-12 07:41:51 -06:00
Masayuki Ishikawa
0eb9bfa49d Merged in masayuki2009/nuttx.nuttx/fe310_with_pll (pull request #1094) 
fe310 with pll

* arch: fe310: Introduce CONFIG_ARCH_CHIP_FE310_QEMU

* boards: hifive1-revb: Introduce CONFIG_ARCH_CHIP_FE310_QEMU

* arch: fe310: Add support for PLL

* boards: hifive1-revb: Increase uart0 tx buff size and add getprime app

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-11 12:01:53 +00:00
Petro Karashchenko
813902cf87 arch/arm/src/am335x and boards/arm/am335x/beaglebone-black: Add I2C support for AM335X. 2019-12-10 20:22:25 -06:00
Ouss4
8ae156c8a1 boards/xtensa/esp32/esp32-core/README.txt: Update the toolchain installation help. 2019-12-10 13:44:28 -06:00
Gregory Nutt
897378bc29 Remove support for generation of RRLOAD binary files. The RRLOAD binary format was used with Linux BSPs from www.ridgerun.com circa 2000-2001. It is still need by the the c5471 board if that bootloader is used. Removes the CONFIG_RRLOAD_BINARY option and tools/mkimage.sh 
This change was motivated by the presence of the mkimage.sh file under tools.  That is the tool that created the RRLOAD binary format.  That bash script has a GPL license and, hence, may not be included in an Apache-licensed project.
 2019-12-09 11:29:12 -06:00
Gregory Nutt
b2035ebb1c boards/arm/imxrt/imxrt1020-evk/src/imxrt_autoleds.c: Must include imxrt1020-evk.h 2019-12-08 08:24:02 -06:00
Gregory Nutt
3e85a7e53d boards/arm/imxrt/imxrt10x0-evk/include/board.h and src/imxrt10x0-evk.h: Board internal GPIO definitions were erroneously moved to board.h in a previous comment. This restores them to where they belong in the private imxrt10x0-evk.h header file. 2019-12-08 08:02:31 -06:00
Masayuki Ishikawa
2cde7dcc8d Merged in masayuki2009/nuttx.nuttx/sparkfun_redv (pull request #1091) 
Sparkfun RED-V Things Plus

* board: hifive1-revb: Update README-qemu.txt

* arch: fe310: Works with SparkFun RED-V Things Plus

    Should work with HiFive1 Rev.B but not tested yet.

* boards: hifive1-revb: Works with SparkFun RED-V Things Plus

    Should work with HiFive1 Rev.B but not tested yet.

Approved-by: Alan Carvalho de Assis <acassis@gmail.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-08 12:42:48 +00:00
Gregory Nutt
dd55d4d8d6 board.h edited online with Bitbucket 
Fixes a stray chacter introduced in a previous commit.
 2019-12-08 12:26:55 +00:00
Brennan Ashton
56c68c4db6 boards/arm/imxrt/imxrt1020-evk: Fix several errors relation to USBOTG: pin definitions in include/board.h and include path for imxrt_usbotg.h in src/imxrt_usbhost.c. 2019-12-07 21:45:39 -06:00
Gregory Nutt
2437e68d88 boards/arm/stm32/nucleo-f4x1re/src: board.h must always be the last header file included. 2019-12-07 10:17:22 -06:00
Gregory Nutt
703b8303fc boards/arm/stm32/nucleo-f4x1re/include/board.h: board.h header files must never include architecture-specific header files. 2019-12-07 09:43:59 -06:00
Gregory Nutt
9e4602a2f4 drivers/mtd: Apply tools/nxstyle to a few files. Lots more to check. 2019-12-07 08:25:16 -06:00
Xiang Xiao
febf226992 boards/sim/sim/sim/src/sim_bringup.c: Auto mount binfs to /bin if CONFIG_FS_BINFS. 2019-12-05 08:50:59 -06:00
Guillherme Amaral
15f358d6a9 arch/arm/src/stm32f0l0g0: Fix PWM on TIM16 not working: Adjust TIM registers, Add pins available for mapping TIM14-17, CCMR2 registers was being handled for TIMs who do not have it, and Fix PWM frequency being doubled when in center-aligned mode. 2019-12-02 09:14:56 -06:00
Masayuki Ishikawa
f46e5d58d0 Merged in masayuki2009/nuttx.nuttx/fe310_updates (pull request #1085) 
fe310 updates

* arch: fe310: Rename CLIC to CLINT

* boards: hifive1-revb: Add README.txt

* arch: fe310: Use atomic operations in up_irq_save() and up_irq_enable()

* arch: fe310: Remove unused configs in Kconfig

* boards: hifive1-revb: Change UART0 buff size and remove debug features.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-02 14:45:41 +00:00
Masayuki Ishikawa
200770915e Merged in masayuki2009/nuttx.nuttx/spresense_with_elf (pull request #1082) 
boards: spresense: rndis and wifi configurations support elf

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-02 14:22:27 +00:00
Masayuki Ishikawa
a5501cf853 Merged in masayuki2009/nuttx.nuttx/riscv-updates (pull request #1080) 
riscv updates

* arch: risc-v: Remove up_dumpstate.c because the file had been merged into up_assert.c

* boards: gapuino: Modify Makefile which conforms to NuttX standards

* boards: nr5m100-nexys4: Modify Makefile which conforms to NuttX standards

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-01 13:01:04 +00:00
Gregory Nutt
108ffe7044 Within the OS, nxisg_sleep() should be used instead of sleep(). sleep() is a cancellation point and sets the errno value. Neither of which should be done inside the OS. 2019-11-29 19:03:24 -06:00
Gregory Nutt
03e41c6806 boards/: Within the OS, nxisg_usleep() should be used instead of usleep(). usleep() is a cancellation point and sets the errno value. Neither of which should be done inside the OS. 2019-11-29 17:47:03 -06:00
Dave Marples
f410d9711a boards/arm/imxrt/imxrt10x0-evk/include/board.h: Set up TRACE clocking correctly. This also reverts 7dcd57aa4a. 2019-11-29 14:54:08 -06:00
Gregory Nutt
6b66ac0e04 Some minor changes from review of last PR. 2019-11-28 14:45:16 -06:00
Masayuki Ishikawa
7a8e9581ca Merged in masayuki2009/nuttx.nuttx/hifive1-qemu (pull request #1078) 
HiFive1 with qemu

* arch: risc-v: Add include/.gitignore

* arch: risc-v: Add src/.gitignore

* arch: risc-v: Remove uncommon function prototypes in include/irq.h

* arch: risc-v: Add missing symbols and function prototypes in src/common/up_internal.h

* arch: risc-v: Add src/common/up_modifyreg32.c

* arch: risc-v: Enable include Make.dep in src/Makefile

* arch: risc-v: Fix stack coloration in common/up_createstack.c

* arch: risc-v: Add common/up_puts.c

* arch: risc-v: Add common/up_checkstack.c

* arch: rv32im: Move all logics from up_dumpstate.c to up_assert.c

    This change is same as other architectures like arm/src/armv7-m

* arch: Select ARCH_HAVE_STACKCHECK for RISC-V in Kconfig

* arch: risc-v: Add SiFive fe310 processor

    NOTE: Currently only tested with qemu

* boards: hifive1-revb: Add SiFive hifive1-revb board

    NOTE: Currently only tested with qemu

* tools: Add fe310 processor to configure.sh

Approved-by: Alan Carvalho de Assis <acassis@gmail.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-11-28 20:37:24 +00:00
Gregory Nutt
7dcd57aa4a boars/arm/imxrt/imxrt10x0-evk/include/board.h: Define IMXRT_TRACE_CLK_SELECT with arbitrary value just to get through build testing. 2019-11-28 11:18:42 -06:00
Gregory Nutt
f945edaf7a boards/sim/sim/sim: Remove apps/grephics/traveler configuration 2019-11-25 16:47:17 -06:00
Gregory Nutt
f691d774cc STM32 F7 SDMMC: Cosmetic changes from application of tools/nxstyle to all files modified in last PR. 2019-11-25 08:00:45 -06:00
OSer
56f8af5db3 Merged in OSer916/nuttx/stm32f746g_disco_sd_card (pull request #1075) 
Stm32f746g disco sd card

* arch/arm/src/stm32f7/stm32_sdmmc.c: fix compile error

* boards/arm/stm32f7/stm32f746g-disco: add SD/TF Card Support

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-11-25 13:54:45 +00:00
Ouss4
54e09340d5 boards/mips/pic32mz/pic32mz-starterkit/src/pic32mz_userleds.c: Use the pinset_t type when manipulating IOs. 2019-11-23 09:00:43 -06:00
Xiang Xiao
e0307fcd8f boards/sim/sim/sim/src/sim_bringup.c: Mount tmpfs to CONFIG_LIBC_TMPDIR in sim_bringup if CONFIG_FS_TMPFS is defined. 2019-11-23 07:58:50 -06:00
Gregory Nutt
27b6132601 Run files changed in last PR through tools/nxstyle, fix several coding standard violations. 2019-11-21 07:50:37 -06:00
OSer
e1f904c943 Merged in OSer916/nuttx/stm32f746g-disco-n25q (pull request #1074) 
stm32f746g-disco board add n25q128 support

* arch/arm/src/stm32f7/hardware/stm32f74xx75xx_pinmap.h: fix QSPI pin
    config.

* arch/arm/src/stm32f7/stm32_qspi.c: fix gpio_dumpgpioconfig() function,
    fix qspi_command() function

* boards/arm/stm32f7/stm32f746g-disco/README.txt: fix board path

* boards/arm/stm32f7/stm32f746g-disco: add n25q128 function

* boards/arm/stm32f7/stm32f746g-disco/scripts/Make.defs: use st-flash tool to write fireware on Linux

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-11-21 13:39:45 +00:00
Gregory Nutt
677b0bf47e Remove all support for the ancient Pascal compiler and pcode interpreter. 2019-11-21 06:58:38 -06:00
Gregory Nutt
bb6a3341aa boards/arm/stm32h7/nucleo-h743zi/src: Ran all .c and .h files through tools/nxstyle 2019-11-18 16:36:34 -06:00
Lwazi Dube
25aa695a35 Reviewed by David Sidrane. 
boards/arm/stm32h7/stm32h747i-disco:  Remove references to nucleo in the stm32h747i-disco board.
arch/arm/include/stm32h7, arch/arm/src/stm32h7, and boards/arm/stm32h7/stm32h747i-disco:  Add support for the STM32H747I-DISCO board.
 2019-11-18 14:03:38 -06:00