Commit Graph

1464 Commits

Author SHA1 Message Date
Juha Niskanen
422ceec99b Fix typos in comments and Kconfig files
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2021-12-21 03:26:16 -06:00
Ryan Abel
fd9ef2f6a2 fix: Correct issues with userled support on the Nucleo F4x1RE.
Remove space following left parenthesis.

Add space after comment.

Update stm32_bringup.c
2021-12-18 09:11:44 -06:00
raiden00pl
26c7ec5087 boards/arm/nrf52/nrf52832-dk: add sdc support 2021-12-17 11:24:48 -06:00
raiden00pl
4812f9f390 boards/arm/nrf52/nrf52840-dk: add sdc support 2021-12-17 11:24:48 -06:00
raiden00pl
2bb01b25bd boards/arm/nrf52/nrf52832-dk: add procfs support 2021-12-17 11:24:48 -06:00
raiden00pl
ff25063c62 boards/arm/nrf52/nrf52840-dk: add procfs support 2021-12-17 11:24:48 -06:00
Alexander Lunev
12c128ae43 boards/emw3162: enabled internal pull-up resistors on SDIO bus
in STM32F205 chip as there are not external pull-up resistors on SDIO bus on EMW3162 module.
2021-12-16 07:16:49 -06:00
Gerson Fernando Budke
24c0e8bc75 boards/arm/samv7/samv71-xult: Add MCUboot support
Refactor to use common sam_progmem implementation and enable MCUboot
support.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-12-16 06:56:42 -03:00
Gerson Fernando Budke
a6fc88740c boards/arm/samv7: Move MCUboot to common folder
Move MCUboot bootloader implementation to samv7 common folder. This drop
all duplicated code and unify implementation.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-12-16 06:56:42 -03:00
Gerson Fernando Budke
b5868aed6f boards/arm/samv7: Introduce common folder
This introduce common folder structre and rework scripts & tools
files. The linker scripts were reorganized to use best the current
infrastructure which uses a template to create a final samv7.ld
file based in the current SoC memories and bootloader definitions.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-12-16 06:56:42 -03:00
Gerson Fernando Budke
463fbfe975 boards/arm/samv7: Unify linker scripts
After define memory sizes for samv7 it is possible unify linker scripts.
This add necessary changes to perform such operation.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-12-16 06:56:42 -03:00
Gerson Fernando Budke
2dd5578d50 arch/arm/src/samv7/Kconfig: Define mem sizes
Current samv7 platform does not define SoC memories sizes. This define
both internal flash and sram memories sizes and update all defconfig
files.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-12-16 06:56:42 -03:00
zhanghu6
d05b9a9c79 note dump: add CONFIG_SCHED_INSTRUMENTATION_SWITCH
1. If CONFIG_SCHED_INSTRUMENTATION_SWITCH is enabled, then these additional interfaces are expected:
        sched_note_suspend
        sched_note_resume
at the same time,If CONFIG_SMP is enabled,then expected:
        sched_note_cpu_pause
        sched_note_cpu_paused
        sched_note_cpu_resume
        sched_note_cpu_resumed
2. other board if enable SCHED_INSTRUMENTATION,SCHED_INSTRUMENTATION_SWITCH to defconfig.
2021-12-15 07:07:00 -06:00
Petro Karashchenko
51a2db6ffc Kconfig: improve uniformity
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2021-12-14 07:32:48 -06:00
Masayuki Ishikawa
5bae799238 boards: spresense: Adjust CONFIG_FAT_MAXFNAME and CONFIG_NAME_MAX
Summary:
- This commits adjusts the following settings for spresense
- CONFIG_FAT_MAXFNAME : 255 to 128
- CONFIG_NAME_MAX : 765 to 128

Impact:
- None

Testing:
- Tested with spresense:wifi_smp

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-12-13 23:36:49 -06:00
Masayuki Ishikawa
8438813ebe boards: spresense: Update smp/defconfig
Summary:
- Add CONFIG_ARCH_LEDS_CPU_ACTIVITY=y
- Add CONFIG_BOARDCTL_RESET=y

Impact:
- None

Testing:
- Tested with ostest

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-12-10 06:46:22 -06:00
Huang Qi
58e0781e2e arch/arm: Implement TLS support
Signed-off-by: Huang Qi <no1wudi@qq.com>
2021-12-07 23:31:41 -06:00
fenghang
c39ef4420e 1.phyplus update files to accord with the requirement of chcekpatch.sh
2.fix some files to fix compile warning

3.remove blueteeth header files, which are not used in nuttx core.

4.fix configs and add lost files

5.update defconfig, remove useless items

6.fix compile warning for nuttx phyplus

7.delete useless: ble, h4, zblue defconfig files form phyplus configure folder

8.fix file format check error on phyplus source code

9.fix phyplus kconfig param error

10.update configure file for nuttx
2021-12-07 01:37:29 -06:00
fenghang
073c9880a3 phyplus first submit 2021-12-07 01:37:29 -06:00
Masayuki Ishikawa
264a03f04c boards: lc823450-xgevk: Update bt/defconfig for SMP
Summary:
- Remove dvfs, netinit, pipe, instrumentation, hpwork
- Add SMP related configs, ntpc

Impact:
- lc823450-xgevk:bt only

Testing:
- Tested with ostest and btstack (external)

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-12-06 22:10:15 -06:00
raiden00pl
59786bf208 boards/nucleo-f302r8: add 3ph Hall sensor support 2021-12-04 08:51:25 -06:00
Petro Karashchenko
d4a5003376 board/same70-xplained: MCUboot related improvements
- simplify LDSCRIPT file name selection
- rename CONFIG_SAME70XPLAINED_APP_FORMAT_MCUBOOT to
  CONFIG_SAME70XPLAINED_FORMAT_MCUBOOT
- fix usage of SAME70XPLAINED_PROGMEM_OTA_PARTITION
  config option

Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2021-11-29 23:53:46 -06:00
Petro Karashchenko
4b2b7d1d91 boards/same70-qmtech: add support of SAME70 QMTECH board
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2021-11-29 11:17:47 -06:00
Petro Karashchenko
31809724e1 boards/same70-xplained: disable systick before loading MCUboot application
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2021-11-28 20:33:53 -06:00
Gerson Fernando Budke
5c1cefd09d boards/arm/samv7/samv71-xult: Set console at usart1
Set default console port to USART1. This allows easy access to serial
console by embedded debug CDC-ACM driver.

The README is updated with correct information about PB04 use once
samv71-xult can only be debugged using SWD mode. This means that it is
safe use CDC-ACM as default serial console.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-11-28 20:32:13 -06:00
Petro Karashchenko
919aeced30 boards/same70-xplained: fix usage of SAMV71XULT instead of SAME70XPLAINED
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2021-11-27 16:06:48 -03:00
Petro Karashchenko
7ba330dff1 boards/same70-xplained/scripts: fix memory region size for MCUboot app
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2021-11-27 16:06:31 -03:00
Michal Lenc
500738757f boards/arm/samv7/same70-xplained: update adc defconfig with DMA support
Updates defconfig for example application to take the advantage of DMA
support and Timer/counter trigger.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2021-11-27 06:17:45 -06:00
Petro Karashchenko
510154299b boards/same70-xplained: initial support of MCUboot
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>

Co-authored-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-11-26 14:55:34 -03:00
Masanari Iida
627eb08942 boards/raspberrypi-pico: Fix some typos in README.txt
This patch fixes some spelling typos in README.txt
2021-11-22 22:34:19 -06:00
Yuichi Nakamura
dda73393d9 boards/raspberrypi-pico: Update README to fix Pico SDK version 2021-11-22 01:39:36 -06:00
Alin Jerpelea
e27b59456e boards: Haltian Ltd: update licenses to Apache
Gregory Nutt has submitted the SGA
Haltian Ltd has submitted the SGA

as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-11-15 06:49:32 -06:00
asanchez
94af888c66 add board_reset function 2021-11-14 15:46:21 +01:00
Xiang Xiao
e3bcfe5cfa boards: Fix warning: selects CANUTILS_LIBCANUTILS which has unmet direct dependencies (NET_CAN && ALLOW_GPL_COMPONENTS)
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-11-10 09:17:19 +01:00
Xiang Xiao
7c5c77ff7b boards/imx6: Fix symbol value '' invalid for TESTING_OSTEST_FPUSIZE
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-11-10 09:17:19 +01:00
Xiang Xiao
0aeb132d15 board: Run ./tools/refresh.sh --silent all
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-11-10 09:16:35 +01:00
Xiang Xiao
1f371581c8 board: Run ./tools/refresh.sh --silent all
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-11-09 13:09:40 +01:00
Michal Lenc
3db9549fce boards/arm/samv7/same70-xplained: add support for AFEC (ADC) driver
This commit adds board level support for Analog Front End driver to
SAME70 Xplained boaed. Example application can be run via adc
configuration.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2021-11-07 21:04:56 -06:00
Xiang Xiao
3847539f3d board: Run ./tools/refresh.sh --silent all
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-11-07 13:19:15 +01:00
Yuichi Nakamura
c109262a7f rp2040: add rp2040_gpio_get_function_pin() 2021-11-07 03:43:22 -08:00
raiden00pl
f2405ccc57 boards/b-g431b-esc1: register Qenco index pin 2021-11-07 03:52:48 -06:00
David Sidrane
040a04241e drivers/spi:Define SPI_~CS~_DELAY_CONTROL to support other delays 2021-11-06 05:14:05 -05:00
YAMAMOTO Takashi
37141bb5e8 Refresh configs after the removal of NET_TCP_SPLIT 2021-11-04 13:32:57 -05:00
raiden00pl
2d125d33d3 boards/nucleo-f302r8: disable NSH commands for FOC configs to save FLASH 2021-11-04 13:05:31 -05:00
raiden00pl
1c28126670 boards/b-g431b-esc1: add Hall and Qenco support 2021-11-02 11:54:08 -05:00
raiden00pl
99b7ae5207 boards/stm32: Normalize FOC related project 2021-10-31 08:22:49 -05:00
Xiang Xiao
a7a7ba50ac boards/stm32: Normalize FOC related project
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-10-31 12:54:19 +01:00
raiden00pl
d862cbd7c8 boards: rename CONFIG_EXAMPLES_FOC_VEL_ADC to CONFIG_EXAMPLES_FOC_SETPOINT_ADC for all example/foc configurations 2021-10-30 13:50:40 -05:00
Alin Jerpelea
40b467420f author: Florian Olbrich : update licenses to Apache
Gregory Nutt has submitted the SGA
Florian Olbrich has submitted the ICLA

as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-10-21 10:14:11 +02:00
Jari van Ewijk
177acf57c2 S32K1XX boards: Implement userled_getall function 2021-10-18 12:30:18 -07:00
Alan C. Assis
e0389ce1fb build: Replace 'make download' with 'make flash' 2021-10-14 16:33:27 -03:00
Alin Jerpelea
c3617d021a author: Elfaro Lab SL : update licenses to Apache
Gregory Nutt has submitted the SGA
Elfaro Lab SL has submitted the SGA

as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-10-13 04:52:53 -07:00
P.Brier
f6fdc81c2d Added reset code to allow the teensy to compile with CONFIG_BOARDCTL_RESET and be able to reset the board in code 2021-10-06 10:18:14 -03:00
Masayuki Ishikawa
43de6cce13 boards: spresense: Add charger/defconfig
Summary:
- This commit adds charger/defconfig

Impact:
- None

Testing:
- Build only

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-09-29 23:37:41 -07:00
P.Brier
b9d1fcb232 Use ethernet MAC programmed in imxrt OCOTP MAC0/MAC1 (teemsy board has this) 2021-09-29 20:45:14 -07:00
Alin Jerpelea
2984a4dcb6 boards: Omni Hoverboards: update licenses to Apache
Gregory Nutt has submitted the SGA
Omni Hoverboards has submitted the SGA
Paul Alexander Patience  has submitted the ICLA

as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-09-28 04:37:38 -07:00
Alin Jerpelea
1e8d0e02ef boards: Gregory Nutt: update licenses to Apache
Gregory Nutt has submitted the SGA
as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-09-28 04:37:38 -07:00
Alexander Lunev
ea42f84d9a stm32f746g-disco, stm32f769i-disco: "ifconfig: Could not open /proc/net (is procfs mounted?): 20":
In case of "netnsh" configuration network adapter did not work and ifconfig reported the error.
2021-09-26 20:12:13 -07:00
Jari van Ewijk
107e80b61f UCANS32K146 board: s32k1xx_userleds.c style fix 2021-09-21 07:22:06 -07:00
Jari van Ewijk
4b24eca0cf S32K1XXEVB boards: Fix RGB LED output and add comments 2021-09-21 07:22:06 -07:00
Jari van Ewijk
9bbfd31b25 UCANS32K146 board: Add CAN configuraton 2021-09-17 09:28:50 -05:00
Jari van Ewijk
887c508866 UCANS32K146 board config: cleanup & update 2021-09-17 09:28:50 -05:00
Jari van Ewijk
456b4ed584 Remove RDDRONE-UAVCAN144 board 2021-09-17 09:28:50 -05:00
Jari van Ewijk
7c8515e21c Rename RDDRONE-UAVCAN146 board to UCANS32K146 2021-09-17 09:28:50 -05:00
Alin Jerpelea
48f92e6f1d author: Bill Gatliff : update licenses to Apache
Gregory Nutt has submitted the SGA
Bill Gatliff has submitted the ICLA

as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-09-16 21:56:08 -05:00
SPRESENSE
050ee011e5 boards: cxd56xx: Add VIDEO configuration to mpy defconfig
New CISIF which supports rearchitected video driver needs VIDEO configuration.
Add VIDEO configuration because mpy defconfig includes CISIF.
2021-09-15 07:06:35 +02:00
SPRESENSE
a4fcd654a4 boards: cxd56xx: Update defconfig of camera example
Add LCD and NX configurations to camera example as apps/examples/camera changes.
2021-09-15 07:06:35 +02:00
SPRESENSE
74df4b70b3 drivers: video: Rearchitect video driver
Rearchitect video driver:
- Define two video I/F(struct imgsensor_ops_s and struct imgdata_ops_s),
  and support them.
- CISIF driver supports new video I/F struct imgdata_ops_s.
- ISX012 driver supports new video I/F struct imgsensor_ops_s.
- Move ISX012 driver to general driver directory.
2021-09-15 07:06:35 +02:00
Jari van Ewijk
df06b30f2c S32K148EVB cleanup 2021-09-15 12:05:45 +08:00
Jari van Ewijk
e7ee848466 S32K146EVB cleanup 2021-09-15 12:05:45 +08:00
Jari van Ewijk
02a84469a4 S32K144EVB cleanup 2021-09-15 12:05:45 +08:00
Jari van Ewijk
6cb29053a0 S32K118EVB cleanup 2021-09-15 12:05:45 +08:00
Alin Jerpelea
004918999a author: Alan Carvalho de Assis: update licenses to Apache
Alan Carvalho de Assis. has submitted the ICLA
as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-09-15 11:56:41 +08:00
Juha Niskanen
3d5e6b07b4 boards/arm/stm32l4/nucleo-l496zg: add LPUART gpio defines
Also update obsolete instructions.

Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2021-09-14 08:57:25 -07:00
Alan C. Assis
099e9fb4f7 boards: Remove -nostartfiles -nodefaultlibs from LDFLAGS 2021-09-13 08:58:25 +08:00
Harri Luhtala
d4e59b7e8d arch/arm/src/stm32l4: add control for Vddio2 independent I/Os supply valid
Signed-off-by: Harri Luhtala <harri.luhtala@haltian.com>
2021-09-09 08:26:08 -03:00
YAMAMOTO Takashi
c4216d062f Revert "Make: fix use of gcc as LD for modules and ELF executables builds"
This reverts commit 6c2c70c61e.
2021-09-08 09:40:48 +08:00
YAMAMOTO Takashi
a461256aef nucleo-g431kb: Update after the revert of "Make: use gcc as LD"
Remove -Wl, in LDFLAGS.
2021-09-08 09:40:48 +08:00
YAMAMOTO Takashi
58bdcbab9b Revert "Make: use gcc as LD"
This reverts commit 45672c269d.

Because:

* It's very confusing to have cc as LD.
* I don't see what "-nostartfiles -nodefaultlibs" in LDFLAGS are
  supposed to do when we use LD directly. It would be simpler to
  remove them from our LDFLAGS.
2021-09-08 09:40:48 +08:00
YAMAMOTO Takashi
5ad1cba338 Revert "arch: Replace ar and nm with gcc-ar and gcc-nm"
This reverts commit b05737d78f.

Because it broke clang-based builds.
2021-09-07 10:54:15 +08:00
Alin Jerpelea
df088c39f0 author: Anthony Merlino : update licenses to Apache
Verge Aero has submitted the SGA

Anthony Merlino has submitted the SGA

Gregory Nutt has submitted the SGA

Sebastien Lorquet has submitted the ICLA

as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-09-06 20:38:14 +08:00
Alin Jerpelea
be9a0debf2 defconfig: allow use of BSD components
several configs are used for testing and need the BSD components

more information about license can be found here
https://www.apache.org/legal/resolved.html#category-a

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-09-02 21:56:05 +08:00
Xiang Xiao
b05737d78f arch: Replace ar and nm with gcc-ar and gcc-nm
to make enable LTO easily

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-09-02 10:02:14 -03:00
Alin Jerpelea
9d870e1502 defconfig: allow use of BSD components
several configs are used for testing and need the BSD components

more information about license can be found here
https://www.apache.org/legal/resolved.html#category-a

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-09-02 09:00:43 -03:00
Alin Jerpelea
cf884b7460 Revert "defconfig: remove NFS from defconfig"
This reverts commit ff07cb8b2f.
2021-09-02 09:00:43 -03:00
Alan C. Assis
ad83e7bc88 open1788/fb: Fix CONFIG_MQ_MAXMSGSIZE 2021-09-01 11:58:22 +08:00
Michal Lenc
e180f32020 boards/arm/imxrt/teensy-4.x: add option to have CAN3 as can0
This commit adds option for Teensy 4.x board to initialize CAN3 as can0.
The reason of this is the CAN FD capability of CAN3. This commit also
disables tickless mode support for pikron-bb configuration as this option
started causing hard faults which are yet to be solved.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2021-08-31 14:47:41 -03:00
Alin Jerpelea
fd3b87e115 boards: author: Gregory Nutt: update licenses to Apache
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-31 12:38:47 -03:00
Alin Jerpelea
ff07cb8b2f defconfig: remove NFS from defconfig
NFS uses BSD license and should not be enabled by default

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-30 22:39:04 +08:00
Xiang Xiao
b0c782255c libxx: Change CXX_LIBSUPCXX to LIBSUPCXX
align with other Kconfig(e.g. LIBCXXABI, LIBCXX, UCLIBCXX)

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-08-28 17:14:48 -03:00
Xiang Xiao
e3ab1179fa board: Enable CONFIG_LIBCXXABI when CONFIG_LIBCXX is enabled
to avoid link libsupc++.a which is provided by toolchain

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-08-28 17:13:43 -03:00
Alin Jerpelea
5bc10ba9a6 nrf52832-mdk: remove sdc defconfig
By default the Bluetooth configuration is disabled due to BSD license

Please enable the use of BSD licenses and the Bluetooth config

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-27 02:56:22 +08:00
Alin Jerpelea
c29cc7e241 stm32f4discovery: hciuart: remove hciuart defconfig
By default the components with BSD license should be disabled

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-27 02:56:22 +08:00
Masayuki Ishikawa
2b61c8491a boards: lm3s6965-ek: Update qemu-flat/defconfig
Summary:
- Add CONFIG_STACK_COLORATION=y
- Change CONFIG_TASK_NAME_SIZE from 0 to 24
- Add CONFIG_TESTING_OSTEST=y

Impact:
- None

Testing:
- Tested with ostest

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-08-24 12:07:34 +08:00
Masayuki Ishikawa
4413a976eb boards: lm3s6965-ek: Update qemu-protected/defconfig
Summary:
- Add CONFIG_STACK_COLORATION=y
- Change CONFIG_TASK_NAME_SIZE from 0 to 24
- Add CONFIG_TESTING_OSTEST=y

Impact:
- None

Testing:
- Tested with ostest
- NOTE: ostest seems to finish successfully but the victim
  task still exists

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-08-24 12:07:34 +08:00
Xiang Xiao
af72376773 fs: Remove magic field from partition_info_s
since it is wrong and impossible to return file
system magic number from the block or mtd layer.

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-08-20 09:19:52 -03:00
raiden00pl
06cf12617c nucleo-f446re: add 3-phase Hall effect sensor support 2021-08-19 08:19:38 -07:00
raiden00pl
dbe4cd88dd boards/stm32/common: add 3-phase Hall effect sensor common logic 2021-08-19 08:19:38 -07:00
Xiang Xiao
7dc31637aa sama5d3x-ek/ov2640: Enable CONFIG_ALLOW_GPL_COMPONENT
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-08-18 13:48:45 +02:00
Alin Jerpelea
38be55301f boards: tiva: update licenses to Apache
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-16 07:11:32 -07:00
Alin Jerpelea
0686bba9b0 boards: stm3214: update licenses to Apache
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-16 07:11:32 -07:00
Alin Jerpelea
77b427c470 boards: stm32h7: update licenses to Apache
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-16 07:11:32 -07:00
Alin Jerpelea
7b6b9241f5 boards: stm32f7: update licenses to Apache
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-16 07:11:32 -07:00
Alin Jerpelea
13d66c8130 boards: stm32f0l0g0: update licenses to Apache
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-16 07:11:32 -07:00
Alin Jerpelea
c481a5b7ac boards: stm32: update licenses to Apache
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-16 07:11:32 -07:00
Alin Jerpelea
f79e254898 boards: sam5e5: update licenses to Apache
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-16 07:11:32 -07:00
Alin Jerpelea
05653c39ff boards: sam34: update licenses to Apache
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-16 07:11:32 -07:00
Alin Jerpelea
a6365cfb61 boards: moxart: update licenses to Apache
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-16 07:11:32 -07:00
Alin Jerpelea
cbbcdd2393 boards: lpc43xx: update licenses to Apache
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-16 07:11:32 -07:00
Alin Jerpelea
7f458a8cb2 boards: lpc17xx_40xx: update licenses to Apache
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-16 07:11:32 -07:00
Alin Jerpelea
2d395fae31 boards: kinetis: update licenses to Apache
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-16 07:11:32 -07:00
Alin Jerpelea
4fdeea8f4b boards: imxrt: update licenses to Apache
Alan Carvalho de Assis has submitted the ICLA

Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-16 07:11:32 -07:00
Xiang Xiao
71269811ca mtd: Implement BIOC_PARTINFO for all drivers
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-08-16 10:08:26 -03:00
raiden00pl
610ac21240 nucleo-f302r8: add qenco example configuration 2021-08-11 09:30:12 -03:00
raiden00pl
736bcf035e nucleo-g431rb: add qenco example configuration 2021-08-11 09:30:12 -03:00
raiden00pl
f0b377f434 nucleo-f446re: add qenco example configuration 2021-08-11 09:30:12 -03:00
raiden00pl
8cb58213e5 nucleo-f103rb: add qenco example configuration 2021-08-11 09:30:12 -03:00
Xiang Xiao
b12f588140 Rename CONFIG_LIB_BOARDCTL to CONFIG_BOARDCTL
since boardctl isn't a libc feature

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-08-06 13:58:26 +02:00
Pedro Bertoleti
b399c509c8 Add BMP180 and INA219 headers. Fix rp2040_ina219.h last comment format 2021-08-05 20:08:09 -03:00
Xiang Xiao
5025fbef8d Rename LIB_ to LIBC_ for all libc Kconfig
follow other libc component naming convention

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-08-05 19:45:24 +02:00
Daniel P. Carvalho
91264ba704 nucleo-g431kb: modify COMP example
COMP example was changed to use DAC3CH2 signal on COMP INM input.
2021-08-04 20:22:58 +02:00
Masayuki Ishikawa
59bff123e6 boards: spresense: Update rndis_smp/defconfig
Summary:
- I noticed that the RNDIS networking is unstable when running
  nxplayer + command execution via telnet
- This commit is a workaround to fix this issue by disabling
  CONFIG_TCP_WRITE_BUFFERS. Also, CONFIG_SENDFILE_BUFSIZE is
  increased to improve the webserver performance.

Impact:
- spresense:rndis_smp only

Testing:
- Tested with nxplayer, telnetd and webserver

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-08-01 20:49:13 -07:00
Alexander Lunev
95abf562f4 boards: added a basic support for chipKIT Wi-FIRE board;
added Sourcery CodeBench Lite for MIPS ELF Toolchain option;
corrected inaccuracies in Photon board and EMW3162 board README.txt files.
2021-08-01 08:45:02 -07:00
Peter Bee
84480d760b raspberrypi-pico: add support for lcd_dev
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
Change-Id: I5cf9fa40cae6ddfe5c8041145f19e5058b76193f
2021-07-30 14:08:05 -03:00
Xiang Xiao
440ca48778 Replace all __attribute__((packed)) with [begin|end]_packed_struct
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-07-29 21:55:21 -03:00
Xiang Xiao
007adc7736 Replace all __attribute__((section(x)) with locate_data(x)
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-07-29 21:55:21 -03:00
Xiang Xiao
b3f9ffbe72 Replace all __attribute__((aligned(x)) with aligned_data(x)
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-07-29 21:55:21 -03:00
raiden00pl
68a345e248 nucleo-g431rb: add CORDIC example 2021-07-28 20:02:40 -03:00
Alexander Lunev
ff2dd12c3c bcm43xxx: fixed issues with unaligned buffers for DMA transfers.
This fixes the following errors:
- "stm32_dmacapable: stm32_dmacapable: burst crosses 1KiB
up_assert: Assertion failed at file:chip/stm32_sdio.c line: 2890 task: init"

- "stm32_dmacapable: stm32_dmacapable: burst crosses 1KiB
up_assert: Assertion failed at file:chip/stm32_sdio.c line: 2808 task: bcmf"

bcm43xxx: replaced all occurrences of "__attribute__((packed))" by
compiler independent "begin_packed_struct / end_packed_struct".
2021-07-28 13:47:04 -03:00
Nathan Hartman
b92aeb8209 Fix various typos
arch/arm/src/eoss3/eoss3_serial.c:
arch/arm/src/imxrt/hardware/imxrt_flexcan.h:
arch/arm/src/imxrt/imxrt_flexcan.c:
arch/arm/src/imxrt/imxrt_flexpwm.c:
arch/arm/src/imxrt/imxrt_lpi2c.c:
arch/arm/src/kinetis/kinetis_flexcan.c:
arch/arm/src/nrf52/hardware/nrf52_rtc.h:
arch/arm/src/nrf52/nrf52_clockconfig.c:
arch/arm/src/nrf52/nrf52_radio.c:
arch/arm/src/nrf52/nrf52_tim.c:
arch/arm/src/rtl8720c/amebaz_depend.c:
arch/arm/src/s32k1xx/Kconfig:
arch/arm/src/s32k1xx/s32k1xx_flexcan.c:
arch/arm/src/s32k1xx/s32k1xx_lpi2c.c:
arch/arm/src/sama5/hardware/sam_sdmmc.h:
arch/arm/src/sama5/sam_gmac.c:
arch/arm/src/samd5e5/sam_wdt.c:
arch/avr/src/avr32/up_exceptions.S:
arch/avr/src/avr32/up_fullcontextrestore.S:
arch/renesas/src/rx65n/rx65n_dtc.c:
arch/renesas/src/rx65n/rx65n_usbhost.c:
arch/risc-v/src/esp32c3/esp32c3_tickless.c:
boards/arm/stm32h7/stm32h747i-disco/include/board.h:
include/nuttx/lcd/ili9225.h:
libs/libc/stdio/lib_fgetpos.c:
libs/libc/stdio/lib_fseek.c:
libs/libc/stdio/lib_fsetpos.c:

    * Fix typos.
2021-07-25 18:36:53 -07:00
jordi
1e44270558 Kconfig: add quotes in default string value
To avoid the setconfig warning: "style: quotes recommended around
default value for string symbol"
2021-07-23 02:32:19 -07:00
transistorretorcido
c9b4348b81 added st7735 LCD based support
added st7735 LCD based support
2021-07-22 06:23:49 -07:00
Nathan Hartman
609ee6b54b Fix typos in comments and identifiers 2021-07-19 22:55:30 -03:00
Pavel Pisa
6c2c70c61e Make: fix use of gcc as LD for modules and ELF executables builds
The patch

  Make: use gcc as LD

introduced use of GCC wrapper as linker. LD variable references GCC
executable now. But when GCC wrapper s used to build relocatable
loadable objects (ELF executables and modules) then it causes
linking of toolchain default libc and other libraries even when -r
is usd. Another problem is that incorrect multiarch variant is selected
for libraries search and possibly even for LTO or C++ templates
instantiating and other glue code which causes fails during linking
if CFLAGS selects non/default miltiarch variant.

Corresponding CFLAGS are passed to LDMODULEFLAGS and LDELFFLAGS
as well as -nostartfiles -nodefaultlibs options.

Separate line is used to easily find and adjust lines if link
process is changed in future.

Signed-off-by: Pavel Pisa <ppisa@pikron.com>
2021-07-19 08:41:25 -03:00
Alin Jerpelea
7689392528 author: Zilogic Systems: update licenses to Apache
Gregory Nutt has submitted the SGA

Zilogic Systems has submitted the SGA

Uniquix Tecnologia has submitted the SGA

Michael Jung has submitted the ICLA

Alan Carvalho de Assis has submitted the ICLA

as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-07-19 03:08:00 -07:00
Xiang Xiao
663104a2e9 fs: Simplify sendfile implementation
and avoid call nx_ file API in the kernel space

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Id951ca161df2c2ee267dc4b5a0d7dfa67df4c1e6
2021-07-17 07:39:15 -03:00
Roberto Bucher
fc810e3db4 Restored previous files 2021-07-15 23:19:59 -07:00
Daniel P. Carvalho
002945cc6c Add DAC example to nucleo-g431kb 2021-07-15 14:33:15 -03:00
Michal Lenc
28ad7b6376 boards/arm/imxrt/teensy-4.x: update pikron-bb configuration to use tickless mode
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2021-07-13 09:55:29 -03:00
Xiang Xiao
2e43815c92 ea3131/pgnsh: Fix the follow linker error
ld: /github/workspace/sources/nuttx/nuttx section `.data' will not fit in region `locked'
ld: section .paged LMA [0000000011034000,0000000011040fa3] overlaps section .data LMA [0000000011033ff4,00000000110340e3]
ld: region `locked' overflowed by 228 bytes

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-07-11 19:42:30 -07:00
Jiuzhu Dong
85470176e7 sched/task: delete CONFIG_MAX_TASKS limit
Change-Id: I583015a95dbcebd352f81ecb3104ffdbd646a9ec
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
2021-07-11 19:42:30 -07:00
Masayuki Ishikawa
48ab08c43d boards: spresense: Update rndis and rndis_smp defconfigs
Summary:
- This commit adds CONFIG_NET_TCP_WRITE_BUFFERS=y to
  rndis and rndis_smp defconfigs

Impact:
- webserver performance will be improved

Testing:
- Tested with nxplayer, telnetd, webserver, iperf

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-07-09 02:19:32 +02:00
Xiang Xiao
e97ffb1f79 arch/armv7-a: Remove the special SMP SGI process
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Iaf7fe77a3ab7cbf145d907dafb0b7ca54cc4a012
2021-07-09 07:53:05 +09:00
Daniel P. Carvalho
59b2ed4210 Add nucleo-g431kb Analog Comparator example. 2021-07-07 21:34:58 -03:00
transistorretorcido
494e53668e added PCF8574 backpack support
added PCF8574 backpack support

added PCF8574 backpack support

added PCF8574 backpack support
2021-07-06 21:50:42 -05:00
Nathan Hartman
ce20211357 Fix various typos in comments and documentation
Fix typos in these files:
    * Documentation/components/drivers/character/foc.rst
    * Documentation/guides/cpp_cmake.rst
    * Kconfig
    * arch/arm/src/imxrt/imxrt_lpspi.c
    * arch/arm/src/kinetis/kinetis_spi.c
    * arch/arm/src/kl/kl_spi.c
    * arch/arm/src/lpc31xx/lpc31_spi.c
    * arch/arm/src/nrf52/nrf52_radio.h
    * arch/arm/src/s32k1xx/s32k1xx_lpspi.c
    * arch/arm/src/stm32/Kconfig
    * arch/arm/src/stm32/stm32_adc.c
    * arch/arm/src/stm32/stm32_foc.c
    * arch/arm/src/stm32/stm32_foc.h
    * arch/arm/src/stm32/stm32_pwm.c
    * arch/arm/src/stm32/stm32_spi.c
    * arch/arm/src/stm32f0l0g0/stm32_spi.c
    * arch/arm/src/stm32f7/Kconfig
    * arch/arm/src/stm32f7/stm32_spi.c
    * arch/arm/src/stm32h7/Kconfig
    * arch/arm/src/stm32h7/stm32_allocateheap.c
    * arch/arm/src/stm32h7/stm32_fmc.c
    * arch/arm/src/stm32h7/stm32_fmc.h
    * arch/arm/src/stm32h7/stm32_pwm.c
    * arch/arm/src/stm32h7/stm32_qspi.c
    * arch/arm/src/stm32h7/stm32_spi.c
    * arch/arm/src/stm32l4/stm32l4_pwm.c
    * arch/arm/src/stm32l4/stm32l4_spi.c
    * arch/arm/src/stm32l5/Kconfig
    * arch/arm/src/stm32l5/stm32l5_spi.c
    * arch/renesas/src/rx65n/rx65n_dtc.c
    * arch/renesas/src/rx65n/rx65n_usbdev.c
    * arch/risc-v/src/rv32m1/rv32m1_serial.c
    * boards/arm/stm32/b-g431b-esc1/src/stm32_foc.c
    * boards/arm/stm32/nucleo-f103rb/src/stm32_foc_ihm07m1.c
    * boards/arm/stm32/nucleo-f302r8/src/stm32_foc_ihm07m1.c
    * boards/arm/stm32h7/nucleo-h743zi2/README.txt
    * boards/risc-v/rv32m1/rv32m1-vega/README.txt
    * boards/sim/sim/sim/scripts/Make.defs
    * drivers/1wire/1wire.c
    * drivers/1wire/1wire_internal.h
    * drivers/lcd/Kconfig
    * drivers/syslog/ramlog.c
    * fs/fat/Kconfig
    * libs/libc/debug/Kconfig
    * libs/libc/machine/Kconfig
    * libs/libc/stdio/lib_libvsprintf.c
    * libs/libc/stdlib/lib_div.c
    * libs/libc/stdlib/lib_ldiv.c
    * libs/libc/stdlib/lib_lldiv.c
    * libs/libdsp/lib_observer.c
2021-07-04 11:23:26 -05:00
SPRESENSE
3a22af5d9b boards: cxd56xx: Change c++ option to -std=c++11
Change CXXFLAGS from -std=c++98 to -std=c++11.
2021-07-04 00:36:20 -05:00
SPRESENSE
12fb49d0a3 boards: cxd56xx: Fix warning of cxd56 audio driver
Only when CONFIG_AUDIO_CXD56 is enabled, board_audio_initialize_driver
function is available.
2021-07-03 23:33:40 -05:00
SPRESENSE
adc72de2ee boards: cxd56xx: Fix bmp280 compile error
Fix compile error caused by bmp280.h being updated.
2021-07-03 23:33:40 -05:00
SPRESENSE
6f78544fd9 boards: cxd56xx: Fix some printf format warnings
Fix some warnings by -Wformat.
2021-07-03 23:33:40 -05:00
SPRESENSE
751f7973e9 boards: cxd56xx: Fix crashdump compile error in SMP
In CONFIG_SMP=y, use arm_intstack_top() instead of g_intstacktop
to get the base address of interrupt stack.
2021-07-03 23:33:40 -05:00
Xiang Xiao
b1f711f790 mm: Move procfs_register_meminfo into common place
to avoid the code duplication and ensure the consistent behaviour

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-07-03 09:39:32 -07:00
Masayuki Ishikawa
c8a14147d2 boards: spresense: Add interrupt stack to smp/defconfig
Summary:
- This commit adds CONFIG_ARCH_INTERRUPTSTACK=2048 to defconfig

Impact:
- None

Testing:
- Tested with ostest

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-07-03 07:02:33 -05:00
Masayuki Ishikawa
ee66da4566 boards: sam4cmp-db: Update nsh/defconfig
Summary:
- This commit removes SMP features from nsh/defconfig
  because it's still unstable

Impact:
- None

Testing:
- None

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-07-03 04:13:40 -05:00
Masayuki Ishikawa
4a9c07fab1 boards: raspberrypi-pico: Update smp/defconfig
Summary:
- This commit adds CONFIG_ARCH_INTERRUPTSTACK=2048 to smp/defconfig

Impact:
- raspberrypi-pico:smp only

Testing:
- Tested with ostest

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-07-03 04:13:13 -05:00
Xiang Xiao
51b287b084 stm32f103-minimum/sensors: Remove CONFIG_ARCH_STACKDUMP
to avoid the follow link error:
ld: /github/workspace/sources/nuttx/nuttx section `.data' will not fit in region `flash'
ld: region `flash' overflowed by 4 bytes

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-07-03 08:35:23 +02:00
Masayuki Ishikawa
30fd340e74 boards: spresense: Add CONFIG_BOARD_LATE_INITIALIZE=y for SMP
Summary:
- I noticed that spresense:rndis_smp and spresense:wifi_smp
  do not boot due to the recent change in nx_start.c
- As the result of the discussion, I understand that we have to
  add CONFIG_BOARD_LATE_INITIALIZE=y for SMP

Impact:
- spresense only

Testing:
- Tested with spresense:rndis_smp and spresense:wifi_smp

Signed-off-by: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>
2021-07-02 10:15:45 -05:00
Peter Bee
181ad49ffd Support for Waveshare Pico-LCD-1.x modules
Add support for Chinese brand LCDs. The 1.14" and 1.3" modules are
tested.

Module details:
https://www.waveshare.com/wiki/Pico-LCD-1.14
https://www.waveshare.com/wiki/Pico-LCD-1.3

Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2021-06-30 09:03:46 -03:00
Michal Lenc
3d7e0becfb boards/arm/imxrt/teensy-4.x: added board level support for GPIO driver
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2021-06-26 21:41:21 -05:00
Michal Lenc
6e2db9bed1 boards/arm/imxrt/teensy-4.x: added board level support for FlexPWM driver
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2021-06-26 09:58:52 -05:00
Masayuki Ishikawa
e890e2e45c boards: spresense: Update rndis and rndis_smp for workaround
Summary:
- I noticed that Telnet session is sometimes not closed
  when tested with nxplayer + command stress test
- The symptom relates to the change of IOB throttling in TCP
  but we are still finding the root cause.
- This commit is just a workaround to avoid the issue by
  disabling telnet character mode.

Impact:
- spresense:rndis, spresense:rndis_smp only

Testing:
- Tested with nxplayer (HTTP audio streaming) + command stress test

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-06-25 00:58:27 -05:00
Alexander Lunev
f7c8875fd7 sdio,stm32h7: fixed an issue with not starting IDMA data transfer in case of IO_RW_EXTENDED command (CMD53);
corrected setting SDMMC_DCTRL.DTMODE field for block data transfers ending on block count
and for block data transfers ending with STOP_TRANSMISSION command;
stm32_sdio: added more debug messages
2021-06-21 02:47:46 -05:00
Alan C. Assis
d7d3f87f55 stm32f103-minimum/sensors: Remove DS28E17 that is not used and add SENSORTEST 2021-06-20 22:10:31 -05:00
Masanari Iida
91d53bc7fe boards/arm/stm32l4/b-l475e-iot01a/src/stm32_timer.c: Fix missing closing bracket
Add missing ret and closing bracket for 2 syslog messages.
It was found by cppcheck.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
2021-06-18 14:10:40 -03:00
Michal Lenc
b83769feb7 boards/arm/stm32/nucleo-f446re: added support for DAC driver
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2021-06-18 00:49:15 -05:00
Michal Lenc
0851036ae3 boards/arm/imxrt/teensy-4.x: added support for encoder
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2021-06-16 21:22:03 -05:00
Alin Jerpelea
82887c10a7 stm32: Laurent Latil: update licenses to Apache
Laurent Latil has submitted the ICLA

Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-06-16 03:55:55 -05:00
Masayuki Ishikawa
35a7902367 boards: spresense: Update elf/defconfig
Summary:
- This commit adds the following configs to spresense:elf
  +CONFIG_DEBUG_FULLOPT=y
  +CONFIG_DEBUG_SYMBOLS=y
  +CONFIG_STACK_COLORATION=y

Impact:
- None

Testing:
- Tested with spresense

Signed-off-by: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>
2021-06-15 22:30:32 -03:00
Daniel P. Carvalho
4b351fc447 Adds PWM example to nucleo-g431kb board. 2021-06-14 18:45:04 -03:00
Yuichi Nakamura
e00546335d boards/raspberrypi-pico: Add board support for USB device 2021-06-14 09:05:19 -03:00
Alexander Lunev
fd46d7a74f boards: added support for EMW3162 Wi-Fi board 2021-06-11 21:05:24 -05:00
Daniel P. Carvalho
361703a881 Added basic support for nucleo-g431kb board. 2021-06-11 20:51:56 -05:00
Alin Jerpelea
762ae456b3 Author: Michal Lyszczek: update licenses to Apache
Gregory Nutt is has submitted the SGA

Michal Lyszczek has submitted the ICLA

as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-06-11 04:57:25 -05:00
raiden00pl
f6e6bc65ce boards/b-g431b-esc1: add support for FOC configurations 2021-06-10 13:58:33 -03:00
raiden00pl
0ee42f38b3 boards/b-g431b-esc1: add button support 2021-06-10 13:58:33 -03:00
raiden00pl
7a2aa8aa69 b-g431b-esc1: refactor bringup logic for consistency with other boards 2021-06-10 13:58:33 -03:00
Alexander Vasiljev
45672c269d Make: use gcc as LD 2021-06-10 03:43:18 -07:00
Alexander Lunev
1bb23a7a33 boards: lm3s6965-ek: added config to run NuttX with enabled NXFLAT binary loader mode on QEMU;
Conditionally turn off -mpic-data-is-text-relative flag to access bss via the GOT
(https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=139630111).

This is related to issue #3737.
2021-06-09 12:03:35 -05:00
Michal Lenc
02d42e4f03 boards/arm/stm32/nucleo-f446re: added support for GPIO driver
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2021-06-09 11:54:02 -05:00
Juha Niskanen
6c67b560b4 boards: stm32l5: remove unused STM32L5_BOARD_HCLK
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2021-06-09 11:53:20 -05:00
Juha Niskanen
ed3c73b307 boards: stm32l4: remove unused STM32L4_BOARD_HCLK
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2021-06-09 11:53:20 -05:00
Xiang Xiao
5b2a17b892 Include assert.h in necessary place
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-06-08 13:06:08 -07:00
Michal Lenc
dd8420431a boards/arm/stm32/nucleo-f446re: fixed wrong qetimer config name
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2021-06-06 22:48:49 +01:00
Matheus Castello
f81f973af3 boards: rp2040: Add user gpio driver
Add user space gpio driver supporting gpout, gpin, gpint

Signed-off-by: Matheus Castello <matheus@castello.eng.br>
2021-06-05 12:58:20 -03:00
Peter van der Perk
81954fc644 UCANS32K146 add support for B revision 2021-06-04 10:23:09 -05:00
Jaroslav Beran
4494ed8a5d samv7/samv71-xult: Add board support for ST7789 LCD controller
SPI0 is used for the connection of the LCD controller.

Additional SPI and GPIO signals definitions:

SPI0_NPCS1 - SPI Chip Select, PD25
GPIO_LCD_CD - Command/Data, pin PB2
GPIO_LCD_RST - Reset, pin PB3

boards/arm/samv7/samv71-xult/src/sam_st7789.c is
derived from boards/arm/imxrt/teensy-4.x/src/imxrt_st7789.c

Signed-off-by: Jaroslav Beran <jara.beran@gmail.com>
2021-06-03 21:33:52 -05:00
Xiang Xiao
2e54df0f35 Don't include assert.h from public header file
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-06-03 08:36:03 -07:00
YAMAMOTO Takashi
c20ed229b1 refresh configs 2021-06-03 10:05:33 -05:00
Fotis Panagiotopoulos
e189d83e11 SYSLOG channel add functions return handle to the channel. 2021-06-03 08:36:15 -05:00
Masayuki Ishikawa
9e8441e66e boards: spresense: Normalize rndis_smp and wifi_smp defconfigs
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-06-02 22:13:10 -05:00
Kazuya Hioki
ee0833c45d boards: cxd56xx: Apply CXD56_PHYSADDR to cxd56_imageproc.c and cxd56_audio_dma.c
Summary:
- This commit converts data to the physical address for DMA transfer.

Impact:
- cxd56_imageproc.c and cxd56_audio_dma.c

Testing:
- Not tested

Signed-off-by: Kazuya Hioki <Kazuya.Hioki@sony.com>
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-06-02 22:13:10 -05:00
Kazuya Hioki
d3ef61af31 boards: spresense: Introduce ramconfig-new.ld for the system bus
Summary:
- In order to support the atomic instructions by ldrex/strex instruction
  in NuttX SMP, the data or later sections are mapped to the system bus.

Impact:
- Bootloader for Spresense SDK 2.1.0 or later must be installed
- Loops per msec must be adjusted
- Physical address for DMA must be converted with CXD56_PHYSADDR

Testing:
- Will be tested with later commits

Signed-off-by: Kazuya Hioki <Kazuya.Hioki@sony.com>
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-06-02 22:13:10 -05:00
Nakamura, Yuuichi
85f9b893b2 Add new config nsh_trace for spresense 2021-06-01 00:48:59 -05:00
Xiang Xiao
d7f96003cf Don't include debug.h from public header file
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-06-01 06:42:02 +09:00
Abdelatif Guettouche
c2275016ec boards/arm/stm32/nucleo-f412zg/src/nucleo-f412zg.h: Remove the duplicate
definition of GPIO_OTGFS_VBUS, it's already defined by stm32f412xx_pinmap.h.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-05-28 05:42:33 -07:00
Abdelatif Guettouche
ece1c5c503 boards/arm/stm32/nucleo-f412zg/scripts/Make.defs: Replace EXTRADEFINES
by EXTRAFLAGS.  This was supposed to be part of an old PR but this board
was left behind.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-05-28 05:42:33 -07:00
Masayuki Ishikawa
f14ceb43b7 boards: spresense: Remove CONFIG_LIBM from defconfigs
Summary:
- This commit removes CONFIG_LIBM from defconfigs to use libm for gcc

Impact:
- Applications which use the math library

Testing:
- Tested with spresense:wifi_smp

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-05-27 12:56:54 +02:00
Tanushree Baindur
7a49fade03 Eagle100: Fix build error in eagle100:nxflat config 2021-05-25 01:37:37 -05:00
Xiang Xiao
001e7c3e76 sched: Don't include nuttx/sched.h inside sched.h
But let nuttx/sched.h include sched.h instead to
avoid expose nuttx kernel API to userspace.

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-05-24 12:11:53 +09:00
SPRESENSE
0146231166 boards: cxd56xx: Fix bug that modem may miss the GPIO interrupt
If the GPIO falls within 300us after raising
(or GPIO raises within 300us after falling), the modem may miss the GPIO
interrupt. So add delay by 300us before changing the GPIO.
2021-05-23 20:42:54 +02:00
SPRESENSE
14c57b0774 boards: cxd56xx: Fix uninitialized variable
Fix uninitialized variable.
CodeSonar Warning 520074
2021-05-23 20:42:54 +02:00
SPRESENSE
21ed297adc boards: cxd56xx: Fix configuration to compile bmp280 sensor
Fix the configuration name to compile cxd56_bmp280_i2c.c.
2021-05-23 20:42:54 +02:00
SPRESENSE
6cc60f3bd9 boards: cxd56xx: Set the pin number to the argument of gpio handler
Make it easy to get the pin number on GPIO interrupt handler.
2021-05-23 20:42:54 +02:00
SPRESENSE
ca775beccb boards: spresense: Support board_reset on interrupt context
When CONFIG_BOARD_RESET_ON_ASSERT is enabled, board_reset() may be
called on interrupt context. This commit changes to be able to call the
function on interrupt context.
2021-05-23 20:42:54 +02:00
SPRESENSE
8b5425d661 boards: spresense: Add delay only for PMIC GPO setting
When RTC clock is still unstable, add a delay time only for PMIC GPO
setting to avoid a problem that the setting is not reflected.
2021-05-23 20:42:54 +02:00
SPRESENSE
8403fe6503 boards: spresense: Fix PMIC setting during boot-up
When RTC clock is still unstable, the continuous PMIC settings may not
be reflected. This commit adds a delay time to avoid such problem.
2021-05-23 20:42:54 +02:00
Huang Qi
f4a0b7aedd libc: Call pthread_exit in user-space by up_pthread_exit
Drop to user-space in kernel/protected build with up_pthread_exit,
now all pthread_cleanup functions executed in user mode.

* A new syscall SYS_pthread_exit added
* A new tcb flag TCB_FLAG_CANCEL_DOING added
* up_pthread_exit implemented for riscv/arm arch

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2021-05-21 22:46:52 -06:00
Gregory Nutt
bb9b58bdde libc: Move pthread_create to user space
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Change-Id: I5c447d94077debc79158686935f288e4c8e51e01
2021-05-21 22:46:52 -06:00
Raman Gopalan
9f9ecffe2e ET-STM32 Stamp: An STM32F103RET6 target for NuttX 2021-05-21 10:58:14 -03:00
Tanushree Baindur
2217d2f0d3 eagle100/configs/nxflat/defconfig: fix error: unused variable 'desc' 2021-05-19 20:43:39 -05:00
Masayuki Ishikawa
d8ca691e2a boards: sabre-6quad: Add ELF support to netnsh and netnsh_smp
Summary:
- This commit adds ELF support to netnsh and netnsh_smp

Impact:
- None

Testing:
- Tested with QEMU

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-05-16 22:30:55 -05:00
Masayuki Ishikawa
a036546feb boards: sabre-6quad: Add posix_spawn/defconfig
Summary:
- This commit adds sabre-6quad/configs/posix_spawn/defconfig

Impact:
- None

Testing:
- Tested with QEMU

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-05-16 22:30:55 -05:00
Masayuki Ishikawa
bd0e586c23 boards: sabre-6quad: Add elf/defconfig
Summary:
- This commit adds sabre-6quad/configs/elf/defconfig

Impact:
- None

Testing:
-Tested with QEMU

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-05-16 22:30:55 -05:00
Brennan Ashton
4a2d4c1950 board/circuit-express: Add usbnsh configuration 2021-05-16 11:35:51 -03:00
Brennan Ashton
2972e7015e board: Add support for Adafruit Circuit Express 2021-05-16 11:35:51 -03:00
Masayuki Ishikawa
3af0ef70ff boards: spresense: Update rndis/rndis_smp/wifi/wifi_smp defconfigs
Summary:
- Add the following configs
  +CONFIG_NFS=y
  +CONFIG_USERMAIN_STACKSIZE=3072 (rndis/defconfig only)

Impact:
- None

Testing:
- Tested with NFS server on Ubuntu 18.04 (x86_64)

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-05-13 22:33:12 -03:00
Masayuki Ishikawa
129229f430 boards: sabre-6quad: Update netnsh/netnsh_smp defconfigs
Summary:
- Add the following configs
  +CONFIG_CODECS_HASH_MD5=y
  +CONFIG_NETUTILS_CODECS=y
  +CONFIG_NFS=y

Impact:
- None

Testing:
- Tested with NFS server on Ubuntu 18.04 (x86_64)

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-05-13 22:33:12 -03:00
Xiang Xiao
11ef8a3201 board: Enable CONFIG_BOARDCTL_ROMDISK
to fix build break by commit 3156aa7532

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-05-13 10:44:16 -05:00
Michal Lenc
1856a85b28 Documentation/platforms: added documentation for imxrt10xx boards 2021-05-12 11:47:32 -03:00
Juha Niskanen
abcb67a292 Remove final remaining CONFIG_DISABLE_SIGNALS and CONFIG_DISABLE_SIGNAL 2021-05-10 17:04:38 -03:00
Nathan Hartman
8af9d39667 Documentation, comments: Minor improvements and typos fixed 2021-05-09 19:12:13 -07:00
Max Kriegleder
8bcef02324 boards/nucleo-h743zi2: added netnsh config 2021-05-05 18:21:44 -03:00
Gustavo Henrique Nihei
534c058d93 spi: Adopt CPHA as the abbreviation for clock phase 2021-05-05 16:56:07 -03:00
Brennan Ashton
2c91805d8f boards/stm32f7: Add i2c and mpu60x0 support to nucleo-144 2021-05-04 10:17:44 -03:00
Max Kriegleder
d1d4237ac7 boards/nucleo-h743zi2: Fixed pin and color of board LED LD2 2021-05-01 21:25:59 -07:00
Michal Lenc
2dcd41f2ab boards/arm/stm32/nucleo-f446re: added support for PWM
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2021-05-01 15:18:24 -03:00
Gregory Nutt
27e0725a4e Remove CONFIG_NET_UDP_BINDTODEVICE from DHCPC configurations
CONFIG_NET_UDP_BINDTODEVICE is now selected by default if DHCPC is enabled.

This change will not build without apps PR 696
2021-04-28 21:22:40 -05:00
Masayuki Ishikawa
1bded73f9f boards: raspberrypi-pico: Add CONFIG_STACK_COLORATION=y to smp/defconfig 2021-04-25 03:19:24 -05:00
Masayuki Ishikawa
05f743aa3a Revert "boards: lc823450-xgevk: Workaround to avoid an ostest crash with rndis"
This reverts commit 65274d5fdf.
2021-04-23 03:25:14 -05:00
Abdelatif Guettouche
f43f066018 boards: Update the iperf configs.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-04-21 13:44:18 -05:00
Masayuki Ishikawa
1a9e7efde5 smp: Remove CONFIG_SMP_IDLETHREAD_STACKSIZE
Summary:
- The CONFIG_SMP_IDLETHREAD_STACKSIZE was introduced to optimize
  the idle stack size for other than CPU0
- However, there are no big differences between the idle stacks.
- This commit removes the config to simplify the kernel code

Impact:
- All SMP configurations

Testing:
- Tested with ostest with the following configs
- spresense:smp, spresense:rndis_smp
- esp32-devkitc:smp (QEMU), maix-bit:smp (QEMU)
- sabre-6quad:smp (QEMU), sabre-6quad:netnsh_smp (QEMU)
- raspberrypi-pico:smp, sim:smp (x86_64)

Signed-off-by: Masayuki Ishikawa <asayuki.Ishikawa@jp.sony.com>
2021-04-19 21:46:39 -05:00
Yuichi Nakamura
7fb73dba1c boards/raspberrypi-pico: Pico Audio Pack (I2S) support 2021-04-19 09:39:51 +09:00
David Sidrane
c3cbe673ad nucleo-h743zi:Use Serial RX/DX DMA 2021-04-17 09:56:41 +02:00
Masayuki Ishikawa
65274d5fdf boards: lc823450-xgevk: Workaround to avoid an ostest crash with rndis
Summary:
- This is just a workaround to avoid a crash in signest_test
- The commit should be reverted once we find the root cause of the issue

Impact:
- None

Testing:
- Tested with ostest

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-04-16 03:53:13 -05:00
Xiang Xiao
2335b69120 arch: Allocate the space from the beginning in up_stack_frame
arch: Allocate the space from the beginning in up_stack_frame

and modify the affected portion:
1.Correct the stack dump and check
2.Allocate tls_info_s by up_stack_frame too
3.Move the stack fork allocation from arch to sched

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-04-16 12:41:41 +09:00
Xiang Xiao
8640d82ce0 arch: Rename g_intstackbase to g_intstacktop
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-04-16 12:41:41 +09:00
raiden00pl
0ada35faeb nucleo-g431rb: add support for IHM16M1 2021-04-15 06:38:39 -05:00
raiden00pl
25240d9114 boards/stm32/common: add support for IHM16M1 2021-04-15 06:38:39 -05:00
raiden00pl
5e59d3753a nucleo-g431rb: fixes for button 2021-04-15 06:38:39 -05:00
jturnsek
7813b4f88a Refreshing default configs 2021-04-14 14:57:26 -07:00
jturnsek
61b0e530b0 Default config without flexspi and mtd 2021-04-14 14:57:26 -07:00
jturnsek
c12ccfc80b Copy .ARM.exidx together with .text to make linker happy 2021-04-14 14:57:26 -07:00
jturnsek
e32d186739 Removing MMCEN pin setting from LPSPI1 2021-04-14 14:57:26 -07:00
jturnsek
e250006b1e FlexSPI NOR missing config and pin iomux 2021-04-14 14:57:26 -07:00
jturnsek
0c4d66dcf0 FlexSPI NOR driver added 2021-04-14 14:57:26 -07:00
jturnsek
2f92ecc7d6 Fixed comment lengths 2021-04-14 14:57:26 -07:00
jturnsek
a4857d78b9 Removing some none existing initialization. 2021-04-14 14:57:26 -07:00
jturnsek
f5d22ccd03 Change ALL copyright from Greg and David to apache since they already sign SGA or ICLA 2021-04-14 14:57:26 -07:00
jturnsek
4e50ba14e8 Removing some none existing configurations from the default 2021-04-14 14:57:26 -07:00
jturnsek
33b071ecb9 MIMXRT1064-EVK support 2021-04-14 14:57:26 -07:00
raiden00pl
d19994139f nucleo-g431rb: add ADC example 2021-04-14 05:02:39 -05:00
Marco Krahl
aea0135273 stm32f103-minimum: Adds custom initializing for sensors
This adds initializing for the following sensor types:
- HYT271 humidity and temperature sensor
- DS18B20 temperature sensor

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2021-04-14 02:49:28 -05:00
Barry Xu
099980efb5 Support different hardware version of Wi-Fi add-on board (iS110B)
Signed-off-by: Barry Xu <barry.xu@sony.com>
2021-04-14 16:10:51 +09:00
raiden00pl
f467a741fb nucleo-g431rb: add PWM example 2021-04-13 13:07:38 -07:00
Michal Lenc
0719976722 Documentation: added documentation for i.MX RT series and Teensy 4.x board
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2021-04-13 13:18:47 -05:00
raiden00pl
fd754f88b7 nucleo-g431rb: add button support 2021-04-13 05:29:32 -05:00
raiden00pl
5dd19f8072 nucleo-g431rb: refactor bringup logic for consistency with other boards 2021-04-13 05:29:32 -05:00
Alin Jerpelea
20d315abfe NuttX: Falker Atomacao Agrícola Ltda: update licenses to Apache
Falker Atomacao Agrícola Ltda has submitted the SGA and we can migrate the licenses
 to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-13 05:28:28 -05:00
Masayuki Ishikawa
0d1d42ec5f boards: spresense: Update defconfigs for rndis and rndis_smp
Summary:
- Update spresense:rndis_smp
  - Remove CONFIG_MAX_TASKS=16
  - Enable CONFIG_RTC_ALARM and CONFIG_RTC_HIRES
- Update spresense:rndis
  - Follow rndis_smp configuration except for SMP

Impact:
- spresense:rndis and spresense:rndis_smp

Testing:
- Tested with nxplayer

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-04-12 23:19:30 -05:00
jturnsek
f57ff30545 Removing FLexSPI NOR driver 2021-04-12 17:22:14 -03:00
jturnsek
177ff946b8 Missing nl 2021-04-12 11:35:44 -03:00
raiden00pl
4972153ee6 nucleo-f103rb: add FOC example based on IHM07M1 expansion board (only fixed16) 2021-04-11 03:52:21 -05:00
raiden00pl
ad6c4ff0cd nucleo-f103rb: refactor bringup logic for consistency with other boards 2021-04-11 03:52:21 -05:00
raiden00pl
5eadd8b3a9 nucleo-f446re: add ADC example 2021-04-10 15:48:06 -05:00
raiden00pl
155770b1e7 nucleo-f446re: fix compilation error when ADC is enabled and FOC is disabled 2021-04-10 15:48:06 -05:00
Xiang Xiao
3f67c67aaf arch: Fix the stack boundary calculation and check
All supported arch uses a push-down stack:
The stack grows toward lower addresses in memory. The stack pointer
register points to the lowest, valid working address (the "top" of
the stack). Items on the stack are referenced as positive(include zero)
word offsets from sp.
Which means that for stack in the [begin, begin + size):
1.The initial SP point to begin + size
2.push equals sub and then store
3.pop equals load and then add

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-04-10 08:39:54 -07:00
raiden00pl
2b309349fe nucleo-f446re: add FOC example based on IHM08M1 expansion board 2021-04-10 08:19:14 -07:00
raiden00pl
0186ec1e05 nucleo-f302r8: add FOC example based on IHM07M1 expansion board 2021-04-10 08:19:14 -07:00
Alin Jerpelea
aa7c1dc67f boards: stm32l4: Fix nxstyle warning
Port from a0fae8c4d6

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-10 06:46:32 -05:00
Alin Jerpelea
eac1d28aae NuttX: Janne Rosberg: update licenses to Apache
Janne Rosberg has submitted the ICLA and we can migrate the licenses
 to Apache.

David Sidrane has submitted the ICLA and we can migrate the licenses
 to Apache.

Ivan Ucherdzhiev has submitted the ICLA and we can migrate the licenses
 to Apache.

Gregory Nutt has submitted the SGA and we can migrate the licenses
 to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-10 06:42:19 -05:00
Alin Jerpelea
231b8518b7 NuttX: Ken Pettit: update licenses to Apache
Ken Pettit has submitted the ICLA and we can migrate the licenses
 to Apache.

Sebastien Lorquet has submitted the ICLA and we can migrate the licenses
 to Apache.

Gregory Nutt has submitted the SGA and we can migrate the licenses
 to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-10 06:42:19 -05:00
Michal Lenc
4b8df9f835 boards/arm/stm32/nucleo-f446re: added support for ili9225 display
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2021-04-09 22:41:56 -03:00
Alin Jerpelea
d2e7ea05c6 NuttX: typo fix
Yype fix for Public Functions reported by nxstyle

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-08 22:48:46 -05:00
Gustavo Henrique Nihei
c4ed7361b7 boards/sama5d3-xplained: Fix a typo on the EINTR error code 2021-04-08 14:41:22 -03:00
Gustavo Henrique Nihei
ada84cacda drivers/input: Rename AJOYSTICK configs to INPUT_AJOYSTICK 2021-04-08 14:41:22 -03:00
Gustavo Henrique Nihei
3054237d2e drivers/input: Rename DJOYSTICK configs to INPUT_DJOYSTICK 2021-04-08 14:41:22 -03:00
Gustavo Henrique Nihei
2efae6928d drivers/input: Rename BUTTONS configs to INPUT_BUTTONS 2021-04-08 14:41:22 -03:00
Alin Jerpelea
b1581efacc boards: nrf52: remove empty files
Remove the empty files from the board folder (reported by nxstyle tool).

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-08 09:20:35 -03:00
Alin Jerpelea
8bdcca039e boards: stm32f334-disco: remove empty files
Remove the empty files from the board folder (reported by nxstyle tool).

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-08 09:20:35 -03:00
Alin Jerpelea
413f11c598 boards: nucleo-f334r8: remove empty files
Remove the empty files from the board folder (reported by nxstyle tool).

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-08 09:20:35 -03:00
Anthony Merlino
028aca433c Removes STM32_BOARD_HCLK from all board.h files. It is now unneccessary. Use STM32_HCLK_FREQUENCY instead. 2021-04-06 22:42:06 -05:00
Alin Jerpelea
21190ab90d boards: Mixed Case fixes
fixes for Mixed Case Identifiers reported by nxstyle tool

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-06 12:50:41 -05:00
Alin Jerpelea
f8420a9e47 boards: nxstyle fixes
fixes for nxstyle errors reported by the tool.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-06 12:50:41 -05:00
Alin Jerpelea
72041911ce NuttX: Marco Krahl: update licenses to Apache
Marco Krahl has submitted the ICLA and we can migrate the licenses
 to Apache.

Gregory Nutt, S.A has submitted the SGA and we can migrate the licenses
 to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-06 12:50:41 -05:00
Alin Jerpelea
c336a792b2 boards: arm: stm32f7: nxstyle fixes
Fix for errors reported by nxstyle

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-05 07:32:18 -05:00
Alin Jerpelea
5b7405356b boards: Philippe Coval: update licenses to Apache
Philippe Coval has submitted the ICLA and we can migrate the licenses
 to Apache.

Alan Carvalho de Assis has submitted the ICLA and we can migrate the licenses
 to Apache.

Gregory Nutt, S.A has submitted the SGA and we can migrate the licenses
 to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-05 07:32:18 -05:00
Alan C. Assis
87fe0e6072 stm32f4discovery: Add Modbus Slave example 2021-04-05 01:24:21 -05:00
Xiang Xiao
9097244cb8 build: Makefile should reference CONFIG_HOST_xxx
instead to detect the host through uname

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-04-04 23:20:35 -07:00
Xiang Xiao
661d597d19 stm32/nucleo-g431rb-esc1: Normalize nsh config
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-04-04 13:56:39 -03:00
Xiang Xiao
6fb0fd6825 stm32/nucleo-g431rb: Normalize nsh config
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-04-04 11:54:21 -03:00
Alin Jerpelea
015a205ec6 arch: arm: David Sidrane: update licenses to Apache
David Sidrane has submitted the ICLA and we can migrate the licenses
 to Apache.

Mateusz Szafoni has submitted the ICLA and we can migrate the licenses
 to Apache.

Gregory Nutt has submitted the SGA and we can migrate the licenses
 to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-03 09:36:43 -05:00
Alin Jerpelea
6ceb0d8d9b arch: arm: imxrt: Actia Nordic AB: update licenses to Apache
Actia Nordic AB has submitted the SGA and we can migrate the licenses
 to Apache.

Gregory Nutt has submitted the SGA and we can migrate the licenses
 to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-03 09:36:43 -05:00
Sungwoo Kim
4bb624b8a1 boards/**/defconfig: Remove explict disables for mb, mh, and mw
Since https://github.com/apache/incubator-nuttx-apps/pull/647 disables
them by default.
See:
- https://github.com/apache/incubator-nuttx/issues/3011
-
https://github.com/apache/incubator-nuttx-apps/pull/647#issuecomment-812818855

Co-authored-by: Gisu Yeo <wcharcode@gmail.com>
Co-authored-by: Taegyu Kim <tgkim@purdue.edu>
2021-04-03 09:36:08 -05:00
Alin Jerpelea
26fef3f6a1 NuttX: Fix nxtyle errors
Fix errors reported by nxstyle

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-03 04:20:31 -07:00
Alin Jerpelea
08e5378b11 NuttX: Gregory Nutt: update licenses to Apache
Several licenses were missed in the initial work

David Sidrane has submitted the ICLA and we can migrate the licenses
 to Apache.

Gregory Nutt has submitted the SGA and we can migrate the licenses
 to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-03 04:20:31 -07:00
Gustavo L F Walbon
b10c6d69c4 board/arm/lpc17xx_40xx/mbed: userled defconfig
Added a simple defconfig to support the userled driver and its application
for testing in the nsh.

Signed-off-by: Gustavo L F Walbon <gwalbon@linux.ibm.com>
2021-04-02 08:50:39 -05:00
Nathan Hartman
c869bc5348 docs and comments: Update stale references to COPYING
Since 7a046358d9 the top-level COPYING
file has been deleted and replaced by DISCLAIMER, LICENSE, and NOTICE
files. However, some references to the old COPYING file remained in
Kconfig help text and documentation.

Documentation/contributing/coding_style.rst:
Documentation/introduction/about.rst:
boards/arm/lpc17xx_40xx/olimex-lpc1766stk/README.txt:
boards/arm/sam34/arduino-due/README.txt:
boards/arm/sam34/sam4l-xplained/README.txt:
boards/arm/sama5/giant-board/README.md:
boards/arm/sama5/sama5d2-xult/README.txt:
boards/arm/sama5/sama5d4-ek/README.txt:
boards/arm/samd2l2/samd20-xplained/README.txt:
boards/arm/samd2l2/samd21-xplained/README.txt:
boards/arm/samd2l2/saml21-xplained/README.txt:
boards/arm/stm32/hymini-stm32v/README.txt:
boards/arm/stm32/stm3210e-eval/README.txt:
fs/fat/Kconfig:
libs/libc/string/Kconfig:

    * Updates stale references to the old top-level COPYING file to
      either LICENSE or NOTICE (or both), as appropriate in each
      instance.
2021-04-01 21:10:56 -05:00
raiden00pl
5bff5dc971 motor/foc: use motor debug messages in FOC files 2021-04-01 15:43:49 -03:00
Alin Jerpelea
7a29e1f5fb drivers: Nxstyle fixes
Nxstyle fixes to pass CI

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-01 12:13:12 -05:00
Alin Jerpelea
b1ca7cf3ce boards: Nxstyle fixes
Nxstyle fixes to pass CI

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-01 12:13:12 -05:00