Commit Graph

14868 Commits

Author SHA1 Message Date
Gregory Nutt
d8c282a9b6 arch/arm/src/imxrt/Kconfig: Trivial correction to a variable description. 2019-06-21 09:07:52 -06:00
Adam Porter
af9b70ca5d STM32,F7,H7,L4 OTG FS/HS: Fix constant using in comparison to determine endpoint is interrupt type. 2019-06-20 06:58:35 -06:00
Adam Porter
ac46dbbffd drivers/usbhost: Remove duplicate const in usbhost files. 2019-06-20 06:49:56 -06:00
Gregory Nutt
ad0181a6d4 arch/z80/src/ez80/ez80_spi.c: Fix a poorly constructed loop that would lead to hangs. 2019-06-18 09:28:13 -06:00
Gregory Nutt
4bfa6fe511 arch/z80/src/ez80: Correct setting of RTC time. 2019-06-18 08:32:31 -06:00
Alin Jerpelea
2a32f36540 Merged in alinjerpelea/nuttx (pull request #909)
arch: arm: cxd56xx: SCU, ADC, I2C

* nuttx: configs: spresense: LEDS: fix warnings

    In the initial code several errors were missed because I pushed
    the dirty code.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add Sensor Control Unit (SCU)

    Add Sensor Control Unit (SCU) on cxd56xx chip

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add I2C support

    add I2C support on cxd56xx chip

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add ADC interface support

    Add ADC interface support on cxd56xx chip

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: Use DMAC for reading sensing data

    Use DMAC for reading sensing data from SCU on cxd56xx chip

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: code style sanitization

    NuttX does not use Deoxygen for documentation and no file should contain Doxygen tags or Doxygen style comments.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* configs: spresense: enable I2CDEV

    add enable I2CDEV for spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* configs: spresense: add notification LEDs

    Add usefull diagnostic LEDs on the speresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-18 12:46:43 +00:00
Alin Jerpelea
f50080b251 Merged in alinjerpelea/nuttx (pull request #907)
arch: arm: cxd56xx: add UID support

* arch: arm: cxd56xx: add UID support

    Add support to be able to read the HW UID

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* configs: spresense: enable USERLEDS

    add USERLED for spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-17 22:02:19 +00:00
Gregory Nutt
4d78132c46 arch/z80/src/ez80: Fix a bad SPI register address definition. Clean up RTC lower half driver problems. Update a README. 2019-06-17 15:20:28 -06:00
Gregory Nutt
df5ed6e08a Merge branch 'master' of bitbucket.org:nuttx/nuttx 2019-06-17 15:15:30 -06:00
Gregory Nutt
7aa8039179 Squashed commit of the following:
commit f5080f53516a853408dd80f09f85e1d1c139133f
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 12:24:22 2019 -0600

    arch/z80/src/ez80/ez80_spi.c:  SPI driver still does not work.  But the driver now has timeouts so that at least it does not hang the system on startup.

commit 5241e9ae643981c43c8c7fa8478a01d0c2e17eb0
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 10:45:11 2019 -0600

    arch/z80/src/ez80:  Fixes to SPI baud rate calculation.

commit ce2e9e3703485563a0a5b6a57e4080ad45d91fd7
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 09:29:13 2019 -0600

    arch/z80/src/ez80:  Cosmetic and unnecessary clean-up or serial driver.

commit 77287c8508a7e3262068d3e8cf1c5f8e27f3a144
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 09:08:56 2019 -0600

    arch/z80/src/common and arch/z80/src/ez80:  Clean up some assertion-related logic.

commit 4d2d3594c22f7240119255825fce2d2437301404
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 07:48:21 2019 -0600

    configs/makerlisp/nsh/defconfig:  Enable STACKDUMP on assertion.

commit 76b7a2faa3f213dd26634dd9440d12f746cac097
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 07:47:55 2019 -0600

    configs/makerlisp/include/board.h:  Don't put the board in reset on a simple assertion, onlhy a full panic.

commit 0a0dc12edcd39c07696769cb7249d8c39a148ccc
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 07:46:54 2019 -0600

    arch/z80/src/ez80/ez80_rtc_lowerhalf.c:  Remove all references to alarm ID.

commit 1a4dba1075fcf6466e87520a8ba66bbf91d696d7
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 07:33:29 2019 -0600

    configs/makerlisp/src/ez80_bringup.c:  Fix an error that was causing MMC/SD to fail to initialize.  Unfortunately now the system hangs.

commit 145a395c7a8e73336fe62caf803d108c59e306a5
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 07:32:50 2019 -0600

    arch/z80/src/ez80:  Add an RTC lower half driver.  Initial commit is just the STM32 RTC lower half with name changes.
2019-06-17 12:25:43 -06:00
Masayuki Ishikawa
8b5827de43 Merged in masayuki2009/nuttx.nuttx/fix_debug_build_for_sresense (pull request #905)
arch/arm/src/cxd56xx: Fix cxd56_wdt.c in debug build

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-17 00:31:12 +00:00
Gregory Nutt
1fd6c432fc configs/makerlisp/nsh/defconfig: Enable Procfs, RTC, and SPI-based SD support. Various fixes under arch/z80/src/ez80 for a clean compile. 2019-06-16 14:45:38 -06:00
Gregory Nutt
a02858365a arch/z80/src/ez80/ez80_vectors.asm: Fix a logic error in vector initialization 2019-06-16 11:48:29 -06:00
Gregory Nutt
7e05bacd54 configs/makerlisp: Update external memory settings in linker script. 2019-06-16 11:48:29 -06:00
raiden00pl
cad6325589 Merged in raiden00/nuttx_h7 (pull request #904)
stm32g0: Fix error when SINGLEWIRE or SERIALBRK_BSDCOMPAT defined (it reflects changes in STM32H7)

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-16 17:34:09 +00:00
Alin Jerpelea
92892a8dd7 Merged in alinjerpelea/nuttx (pull request #902)
arch: arm: cxd56xx: PM and PWM

* configs: spresense: add SPI configuration

    add SPI configuration for spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add support for PWM

    add support for PWM for cxd56xx

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* configs: spresense: enable PWM support

    enable PWM support on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add Power Management PROCFS support

    the powermanager procfs support will export
    /proc/pm:
     clock
     power

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* configs: spresense: enable powermanager procfs support

    The powermanager procfs is disabled by default and need to be enabled
    by the CONFIG_CXD56_PM_PROCFS option

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add timer driver

    Add timer driver for cxd56xx.

    NOTE
    The timer allows a divider of 1, 16 and 256 options

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add Watch Dog Timer

    Add Watch Dog Timer on cxd56xx

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* configs: spresense: enable timer

    the platform support has been added and now we can use the timers
    on spresense board.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* configs: spresense: enable WatchDog timer

    The platform support has been added and now we can use the WatchDog
    Timer on spresense board.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-14 18:40:06 +00:00
Masayuki Ishikawa
ae2506619f Merged in masayuki2009/nuttx.nuttx/change_cxd56_gpioint_config (pull request #901)
change cxd56 gpioint config

* arch/arm/src/cxd56xx: Change cxd56_gpioint_config to handle argument

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/spresense: Apply API change of cxd56_gpioint_config()

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-14 04:10:43 +00:00
David Sidrane
81e17306d1 Merged in david_s5/nuttx/master_h7 (pull request #900)
stm32 h7 Add ADC and a few fixes for timer and Serial

* stm32h7:Fix error when SINGLEWIRE or CONFIG_STM32H7_SERIALBRK_BSDCOMPAT defined

* stm32h7:time fixed compile errors with TIM13,TIM14, TIM7

* stm32h7:Added ADC Driver

* stmh7x3:Added ADC pins to pin map

* stm32h7:Added ADC clocking

* nucleo-h743zi:Add ADC

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-13 19:51:12 +00:00
Alin Jerpelea
a5418405d7 Merged in alinjerpelea/nuttx (pull request #897)
configs: spresense: enable SPI Flash

* arch: arm: cxd56xx: organize menu items

    Group all CXD56xx Options in one menu

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add Storage Options menu

    Add Storage Options menu and Peripheral Support comment

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add SPI Flash support

    add SPI Flash support for cxd56xx

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* configs: spresense: enable SPI Flash

    Enable SPI Flash on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-13 15:04:33 +00:00
Juha Niskanen
abc49a6a13 arch/arm/src/stm32l4: if SRAM3 is used as heap, do not power it off in stop 2 mode. 2019-06-13 05:52:40 -06:00
Alin Jerpelea
e69471ba2f Merged in alinjerpelea/nuttx (pull request #896)
arch: arm: cxd56xx: add SPI, DMA and RTC

* arch: arm: cxd56xx: add SPI support

    Add SPI support for cxd56xx chip

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: Add DMA support

    Add DMA support for cxd56xx

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add RTC functionality

    Add the RTC functionality for cxd56xx

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add RTC_DRIVER

    Add RTC_DRIVER to cxd56xx

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* configs: spresense: enable rtc functionality

    Enable RTC functionality on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-13 11:12:40 +00:00
Masayuki Ishikawa
06aa50e9bb Merged in masayuki2009/nuttx.nuttx/rndis_on_spresense (pull request #895)
rndis on spresense

* arch/arm/src/cxd56xx: Fix ep0 out packet handling in cxd56_usbdev.c

    This change fixes to handle ep0 out packet which exceeds EP0_MAXSIZE.

    For example, 76 bytes of out packet is sent from rndis host during
    rndis negotiation and finally the packet is split into two out packets
    (64 bytes out packet + 12 bytes out packet). To handle these packets,
    actual ep0reqlen is stored during ep0 out setup stage, and if all
    out packets are received, it dispatches to cxd56_ep0setup(), otherwise,
    it sets up the internal USB DMA to receive remaining out packets.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/spresense: Add support for rndis configuration

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-13 05:40:03 +00:00
raiden00pl
aaa173dd37 Merged in raiden00/nuttx_pe (pull request #891)
stm32/stm32_pwm.c, stm32h7/stm32_pwm.c: fix pulsecount for the number of counts greater than 128

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-12 13:22:21 +00:00
Alin Jerpelea
32f89d63f7 Merged in alinjerpelea/nuttx (pull request #890)
Add syscontrol for cxd56xx

* arch: arm: cxd56xx: add sysctl

    Add the syscontrol implementation for cxd56xx.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: timer updates

    Add the function to change the clock speed.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: cxd56_uart updates

    Add pinctrl and clock ctrl functionality.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add conditional for SDHCI

    The cxd56_sdhci should be built only if CONFIG_CXD56_SDIO is selected

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-11 11:19:31 +00:00
Alin Jerpelea
6498ec8d02 Merged in alinjerpelea/nuttx (pull request #888)
arch: arm: cxd56xx: add Power Management support

* arch: arm: cxd56xx: add Power Management support

    Add power management on the cxd56xx

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add Far API

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-10 23:35:15 +00:00
Alin Jerpelea
750e45ad6e Merged in alinjerpelea/nuttx/code_style (pull request #887)
Code style fixes

* arch: arm: cxd56xx: cxd56_cpufifo fix codestyle

    Only codestyle fix

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: cxd56_clock fix codestyle

    Only codestyle fix

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: cxd56_gpio fix codestyle

    Only codestyle fix

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: cxd56_gpioint fix codestyle

    Only codestyle fix

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: cxd56_irq fix codestyle

    Only codestyle fix

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: cxd56_pinconfig fix codestyle

    Only codestyle fix

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: cxd56_pmic fix codestyle

    Only codestyle fix

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: cxd56_sdhci fix codestyle

    Only codestyle fix

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: cxd56_start fix codestyle

    Only codestyle fix

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: cxd56_usbdev fix codestyle

    Only codestyle fix

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-10 13:00:57 +00:00
raiden00pl
e923c7683b Merged in raiden00/nuttx_pe (pull request #886)
Fixes for STM32F1 PWM

arch/arm/src/stm32/hardware/stm32f1xxx_pinmap.h: fix names for complementary PWM outputs

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-10 09:25:54 +00:00
Gregory Nutt
495a648573 arch/z80/src: Rename up_doirq.c and up_internal.h to z80_doirq.c and z80_internal.h for better consistency with the naming conventions 2019-06-09 19:08:42 -06:00
Gregory Nutt
0148124e33 Squashed commit of the following:
nuttx/arch/z80/src:  To properly follow the coding standard, the z80 architecture common should up_mmuinit should be called z80_mmu_initialize.

    nuttx/arch/z80/src:  To properly follow the coding standard, the z80 architecture common should up_loweserialinit should be called z80_lowserial_initialize.

    configs/z80sim/src/z80_serial.c:  Remove unused function up_earlyserialinit()

    nuttx/arch/z80/src:  To properly follow the coding standard, the z80 architecture common should up_serialinit should be called z80_serial_initialize.

    nuttx/arch/z80/src:  To properly follow the coding standard, the z80 architecture common should up_doirq should be called z80_doirq.

    arch/z80/src/common:  up_addregion() must be prototyped in nuttx/mm/mm.h, not up_internal.h
2019-06-08 22:01:53 -06:00
Gregory Nutt
d39ac6c3a1 arch/z80/src/common: Fix some name of internal z80-family common functions. ez80_* is wrong. up_ is misleading. 2019-06-08 11:36:55 -06:00
Gregory Nutt
f5b890d098 Squashed commit of the following:
arch/z80/src/ez80:  Clean-up RTC driver; get a clean compilation.  Still untested.

    arch/z80/src/ez80:  This brings the RTC to code complete, but does not yet compile.

    arch/z80/src/ez80/ez80_rtc.c:  Bring in badly ported RTC driver from STM32F4.  Little more than naming changing at this point not even ready to attempt comilation

    arch/z80/src/ez80:  Add RTC driver.  Initial commit is just the STMF4 RTC driver with name changes.
2019-06-08 09:58:24 -06:00
Gregory Nutt
1f3958116a arch/z80/src/ez80/Make.defs: Fix some backward conditional loic 2019-06-07 13:23:54 -06:00
Gregory Nutt
fbb6f6cde0 configs/: Rename ZDS-II start files from xxx_lowinit.c to xxx_boot.c; rename board initialization logic from xxx_lowinit() to xxx_board_initialize(). These changes make the ZDS-II configurations more similar to board initialization conventions to used for other architectures. 2019-06-05 10:14:58 -06:00
Gregory Nutt
2c1e905aa6 Merge branch 'master' of bitbucket.org:nuttx/nuttx 2019-06-05 09:39:05 -06:00
Gregory Nutt
cf8268f7d8 configs/makerlisp/src/ez80_lowinit.c: Remove redundant SPI GPIO setup. This is already done in the SPI driver.
configs/makerlisp/src/ez80_spi.c:  Add hooks needed by SPI driver.  Move SPI MMC/SD chip selected configuration from ez80_lowinit.c to here as it done in other NuttX architectures.  This enables support for multiple devices on the SPI bus.
2019-06-05 08:20:00 -06:00
Alin Jerpelea
215a146f2e Merged in alinjerpelea/nuttx (pull request #884)
arch: arm: cxd56xx: add support for USB and SDIO

* arch: arm: cxd56xx: add support for USB connectivity

    Add basic support for USB connectivity

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add SDHCI support

    We add SDHCI driver for the cxd56xx

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-05 14:05:56 +00:00
Alin Jerpelea
95c168ccc9 Merged in alinjerpelea/nuttx (pull request #882)
arch: arm: cxd56xx: add Package Configuration

The CXD56xx can come in FCBGA 185 pin or WLCSP 100 pin package.

For each package we have to pick the right pin setup.

The default configuration is set to FCBGA 185 pin package

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-05 11:58:00 +00:00
Alin Jerpelea
eeedce32c4 Merged in alinjerpelea/nuttx (pull request #881)
updates for arch: arm: cxd56xx:

* arch: arm: cxd56xx: add pinconfig

    Add the HW pin configuration for cxd56xx

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add GPIO support

    Add GPIO support for cxd56xx

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add support for GPIO interrupts

    add support for GPIO interrupts

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add clock support

    Add clock support for cxd56xx

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add PMIC support

    Add support for PMIC (Power management integrated circuit)
    for cxd56xx chip

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add FIFO CPU schedulier

    add a simple FIFO schedulier that minimizes overhead

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: add ICC support

    add Inter Core Communication for cxd56xx

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-05 11:29:51 +00:00
Gregory Nutt
4e98980045 Add initial support for the MakerLisp eZ80 board. Ref: https://makerlisp.com/
Squashed commit of the following:

    configs/makerlisp:  Update comments about use of serial console.

    configs/makerlisp:  Add LED support, remove vestiges of button support (the board has no user buttons).  Add support for SPI-based MMC/SD card slot.

    arch/z80/src/ez80:  Fix some link problems.

    libs/libc/syslog/lib_syslog.c:  The ZDS-II toolchain does not declare va_coy in stdarg.h.  I think that the use of va_copy in vsyslog() is no necessary.

    configs/makerlisp:  Initial configuration directories cloned from ez80f910200zco with little more than naming changes.
2019-06-04 11:12:17 -06:00
Gregory Nutt
4a7f0166cf arch/z80/src/ez80/ez80_i2c.c: Cosmetic changes from code review. Also makes I2C and SPI configurable options. 2019-06-04 06:49:45 -06:00
Gregory Nutt
6fbfd00396 arch/z80/src/ez80/ez80_spi.c: Cosmetic changes from code review. 2019-06-03 23:59:53 -06:00
Gregory Nutt
59f3180179 Re-verify ez80 build. Fixes to other ZiLOG architectures broke ez80 again. 2019-06-03 19:04:24 -06:00
Gregory Nutt
622c272ea3 Clean up some variouis compiler problems using SDCC to compiler Z180. 2019-06-03 18:16:23 -06:00
Gregory Nutt
7ab149d8e9 Various fixes to get a clean compile with the SDCC compiler. Compile is 'almost' clean. 2019-06-03 16:53:11 -06:00
Gregory Nutt
fd4436f559 arch/z80/src/Makefile.zdsiil: Minor cleanup 2019-06-03 15:35:36 -06:00
Dave Marples
a2def2a4d1 arch/arm/src/common/up_lwl_console.c: Add support for a 'Lightweight Link' protocol between a target and debugger for use when you need a console but the target doesn't have a spare serial port or other available resource. 2019-06-03 07:31:17 -06:00
raiden00pl
04ea439121 Merged in raiden00/nuttx_h7 (pull request #880)
Initial PWM support for STM32H7

arch/arm/src/stm32h7: port PWM from STM32

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-03 11:51:00 +00:00
Gregory Nutt
167ecaa496 arch/z16/src/z16f/Kconfig and configs/z16f2800100zcog/scripts/Make.defs: Add support for the lastest 5.2.1 version of the ZDS-II toolchain. 2019-06-02 19:21:00 -06:00
Gregory Nutt
87fd570d3a arch/z16/src: Replicate build changes make for ez80 and z8 for zneo. 2019-06-02 18:43:43 -06:00
Gregory Nutt
27bb130bf8 arch/z80/src/: Fix a few more ez80 compile issues. Update README files. 2019-06-02 18:35:32 -06:00