When we record data and dump data, they are all executed within the system,
and there is no need to consider the issue of big or small endianness.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
1. Supporting `SIOCSIFADDR` and `SIOCDIFADDR` with Linux in6_ifreq struct to manage ipv6 addresses.
Ref: https://man7.org/linux/man-pages/man7/netdevice.7.html
2. Supporting alias like 'eth0:0' for multiple IPv6 addresses, to keep previous ioctl `SIOCGLIFADDR`, `SIOCSLIFADDR`, `SIOCGLIFNETMASK` and `SIOCSLIFNETMASK` working.
Ref: https://man7.org/linux/man-pages/man8/ifconfig.8.html
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Race condition if the remote proc is stoped during initialization phase
| #0 0x0249f959 in rpmsg_destroy_ept (ept=0xffffffc0) at open-amp/lib/rpmsg/rpmsg.c:376
| #1 0x024a938c in rpmsg_deinit_vdev (rvdev=0xf2303a48) at open-amp/lib/rpmsg/rpmsg_virtio.c:971
| #2 0x02117e33 in rptun_dev_stop (rproc=0xf2303a04, stop_ns=true) at rptun/rptun.c:891
| #3 0x021181d8 in rptun_do_ioctl (priv=0xf2303a00, cmd=11010, arg=0) at rptun/rptun.c:922
| #4 0x02119722 in rptun_ioctl_foreach (cpuname=0x0, cmd=11010, value=0) at rptun/rptun.c:1086
| #5 0x0211b9df in rptun_poweroff (cpuname=0x0) at rptun/rptun.c:1378
| #6 0x02053aa6 in board_power_off (status=0) at sim/sim_head.c:206
| #7 0x0253d65c in boardctl (cmd=65283, arg=0) at boardctl.c:400
| #8 0x021eb497 in cmd_poweroff (vtbl=0xef606280, argc=1, argv=0xef9b73e0) at nsh_syscmds.c:356
| #9 0x021cdb4d in nsh_command (vtbl=0xef606280, argc=1, argv=0xef9b73e0) at nsh_command.c:1164
| #10 0x021baa72 in nsh_execute (vtbl=0xef606280, argc=1, argv=0xef9b73e0, redirfile=0x0, oflags=0) at nsh_parse.c:845
| #11 0x021c6b0a in nsh_parse_command (vtbl=0xef606280, cmdline=0xef606708 "poweroff") at nsh_parse.c:2744
| #12 0x021c7166 in nsh_parse (vtbl=0xef606280, cmdline=0xef606708 "poweroff") at nsh_parse.c:2828
| #13 0x0221fa2f in nsh_session (pstate=0xef606280, login=1, argc=1, argv=0xef7a7860) at nsh_session.c:245
| #14 0x021f8c04 in nsh_consolemain (argc=1, argv=0xef7a7860) at nsh_consolemain.c:75
| #15 0x021b77eb in nsh_main (argc=1, argv=0xef7a7860) at nsh_main.c:74
| #16 0x02166ddf in nxtask_startup (entrypt=0x21b76ca <nsh_main>, argc=1, argv=0xef7a7860) at sched/task_startup.c:70
| #17 0x020b363c in nxtask_start () at task/task_start.c:134
Signed-off-by: chao an <anchao@xiaomi.com>
In `drivers/rptun/rptun.c`, we have a `rptun_is_recursive` function,
which lets rptun thread run recursively. Then the `usrsock_rpmsg_ept_cb`
may be called inside `usrsock_rpmsg_ept_cb`, which can cause some
unexpected behavior, so we add a queue to keep the order of incoming
messages to reduce the complexity.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
When tun_txavail_work is running, switch to tun_close thread and priv->lock will be destroyed, then switch back to tun_txavail_work thread, an error will occur when nxmutex_unlock(&priv->lock)
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
There is a risk that interfaces such as psock_ioctl/psock_setsockopt
will cause paramete to be not four-byte aligned after calculating the
offset, so align the length of the structure with parameters by four
bytes.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
When tun_txavail_work is running, switch to tun_close thread and priv->lock will be destroyed, then switch back to tun_txavail_work thread, an error will occur when nxmutex_unlock(&priv->lock)
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
In previous versions, during the teardown phase, the "open_blockdriver" would call the "mtd proxy" causing the "file mtd" node to be registered in the ftl. " node is registered in ftl.
Therefore, we changed the behavior to find the corresponding inode by node name.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Add the Sim WiFi function, which can provide the wifi operating on nuttx sim emulator,
and support two modes that simulate wifi, HWSIM and RNC(real network card).
- In the HWSIM mode, we simulates two wlan interfaces. The wlan0 is STA and
the wlan1 is AP. The wlan0 can connect to the wlan1 in the nuttx simulator.
- In the RNC mode, we can use the same wlan interface name on the nuttx simulator
to control the connection behavior of the real wireless card.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
The BIT macro is widely used in NuttX,
and to achieve a unified strategy,
we have placed the implementation of the BIT macro
in bits.h to simplify code implementation.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
so the user could register fb device directly instead
go through the sequence of up_fbinitialize/up_fbgetvplane
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
