Summary:
- This commit changes spinlock APIs (spin_lock_irqsave/spin_unlock_irqrestore)
- In the previous implementation, the global spinlock (i.e. g_irq_spin) was used.
- This commit allows to use caller specific spinlock but also supports to use
g_irq_spin for backword compatibility (In this case, NULL must be specified)
Impact:
- None
Testing:
- Tested with the following configurations
- spresnse:wifi, spresense:wifi_smp
- esp32-devkitc:smp (QEMU), sabre6-quad:smp (QEMU)
- maxi-bit:smp (QEMU), sim:smp
- stm32f4discovery:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Add basic sample rate conversion to the CXD56 Spresense audio
driver using libsamplerate. Currently conversion is only done
during playback and all output is fixed at 48 kHz.
Issues:
- 16 kHz SRC has glitches (unless data dump is enabled)
- 44.1 kHz SRC gets stuck
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
When audio fails it is usefull to have I2S transfer errors in place
to be able to track the issue
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
- Add new functions of GNSS
- Support the lower PWM frequency
- Add CONFIG_CPUFREQ_RELEASE_LOCK
- Add high speed ADC support
- Add HPADC input gain configuration
- Add eMMC device
- Frame buffer support
- Fix SD/GNSS/sensor drivers not worked
- Build errors
- Fix nxstyle issues
Because user may replace math library with other implementation
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Idb5f2a8b2a70302c8561553b3bcbc40529b5257f
In the previous implementation, cxd56_stop() checked the internal
state before sending AUDIO_MSG_STOP to the message queue. However,
if the worker thread took time to turn on AMP, cxd560_stop() was
not able to send the message and caused a deadlock.
This commit fixes this issue by always sending AUDIO_MSG_STOP
regardless of the internal state.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Add recording support to the Nuttx audio driver for Spresense.
- Supports 16 bit data with 48 kHz sample rate only for now.
- Supports 1 (dual mono) 2 or 4 channels.
- Only analog mics have been tested so digital is considered
unsupported.
Adds an initial Nuttx audio driver supporting the Spresense CXD56.
Being a work in progress the driver has a number of limitations:
- Audio playback only, no recording yet.
- Only 16 bit stereo playback is supported.
- In practice only 48kHz playback is supported due to missing SRC.
- Configure driver in "Device Drivers --> Audio Device Support".
Resolution of Issue 619 will require multiple steps, this part of the first step in that resolution: Every call to nxsem_wait_uninterruptible() must handle the return value from nxsem_wait_uninterruptible properly. This commit is only for those files under drivers/audio, drivers/net, and drivers/lcd.
This commit does two things:
1. First, it reorganizes the driver Kconfig files so that each is self contained. Before, a part of the driver configuration was in drivers/Kconfig and the rest was in in drivers/xyz/Konfig. Now, all of the driver configuration is consolitated in the latter.
2. Second, this commit correct numerous serious errors introduced in a previous reorganization of the driver Kconfig files. This was first noted by Nicholas Chin in PR270 for the case of the drivers/i2c/Kconfig but some examination indicates that the error was introduced into several other Kconfig files as well.
The nature of the introduced error was basically this:
- Nothing must intervene between the menuconfig selection and the following conditional configuration otpions.
- A previous PR erroneously introduced unconditional options between the menuconfig and the following confditional logic, thus corrupting the driver menus.
This error was easy to make because the driver Kconfig files were not well modularized. Making them fully self-contained should eliminate this kind of error in the future.
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
