Gregory Nutt
2a93c66948
include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics.
2015-11-26 12:08:09 -06:00
Gregory Nutt
603f3afd6d
Some minor clean-up from last changes
2015-11-25 17:52:47 -06:00
Gregory Nutt
ed35eb0f8d
drivers/loop: Add a loop character device that can be used to setup and teardown loop devices
2015-11-25 17:13:56 -06:00
Ken Pettit
d4a58af380
drivers/mtd/mtd/mtd_procfs/c and include/nuttx/mtd/mtd.h: Add an interface to un-regiser an MTD procfs entry.
...
drivers/mtd/filemtd.c: New new MTD conversion layer that will convert a regular file (or driver file) to an MTD device. This is useful for testing on the simulation using the hostfs.
From Ken Petit
2015-11-25 14:46:28 -06:00
Gregory Nutt
e5f27f5865
Fix some conditional compilation. CONFIG_LIBC_LOCALTIME should be checked in most of the same places wehre CONFIG_TIME_EXTENDED is checked
2015-11-25 12:51:45 -06:00
Ken Pettit
c0b9dcf8a9
fs/hostfs: Add a special file system for use with simulator that supports access to the host file system from the simulation. From Ken Petit
2015-11-25 08:26:26 -06:00
Gregory Nutt
cd7c6705a8
mm.h: Use UINT32_MAX vs. SIZE_MAX in definition of MMSIZE_MAX
2015-11-25 08:11:32 -06:00
Gregory Nutt
6230e6e199
size_t should be 64-bits on a 64-bit machine. mmsize_t should be 32-bits (unless CONFIG_MM_SMALL is selected). This commit backs out the last change to stddef.h
2015-11-23 12:03:36 -06:00
Gregory Nutt
25ab59bf80
stddef.h: Use a round-about cast in the definition of offsetof() to avoid warnings on machines with 64 bit addresses and when size_t is less than 64-bits.
2015-11-23 07:11:05 -06:00
Ken Pettit
375419eaf2
mksmartfs: Remove fs/smartfs/fs_mksmartfs.c and related headers. This has been moved to apps/fsutils/mksmartfs. From Ken Petit
2015-11-23 07:05:09 -06:00
Gregory Nutt
54549ef082
Revert "Add option to specify logical sector size during low level format plus adds some run-time geometry tests. fs/smartfs: Remove the 'mksmartfs()' code from the kernel 'fs'"
...
This reverts commit 96faf0fa3251ca10a17daddc728d931be5a206e0.
2015-11-22 10:15:06 -06:00
Gregory Nutt
64e8f12e2b
Add option to specify logical sector size during low level format plus adds some run-time geometry tests. fs/smartfs: Remove the 'mksmartfs()' code from the kernel 'fs'
...
directory and build.
2015-11-22 10:07:35 -06:00
Gregory Nutt
006528b144
Add support for freopen()
2015-11-22 08:39:17 -06:00
Gregory Nutt
38c9d42e21
drivers/timers/pcf85263.c: Add a driver for the NXP PCF85263 I2C RTC
2015-11-20 17:36:10 -06:00
Gregory Nutt
db2fe45666
Update some comments
2015-11-20 09:55:18 -06:00
Gregory Nutt
4b29bcee7f
Rename up_rtcinitialize to up_rtc_initialize so that it looks like other RTC interfaces
2015-11-20 08:27:52 -06:00
Gregory Nutt
b60c2519d7
arch.h: Update some comments and conditional compilation
2015-11-20 07:13:16 -06:00
Gregory Nutt
c34b5108a7
RTC: Fix system time initialization when using an exernal RTC. Fix some bugs in the DS1307/DS3231 RTC driver
2015-11-19 14:54:30 -06:00
Gregory Nutt
678eb7b78b
Merged in paulpatience/nuttx/stdio (pull request #37 )
...
stdio: Define BUFSIZ
2015-11-18 14:46:03 -06:00
Paul A. Patience
c0a1d8e960
stdio: Define BUFSIZ
2015-11-18 15:09:43 -05:00
Gregory Nutt
f699072507
Merged in paulpatience/nuttx/stdlib (pull request #36 )
...
stdlib: Fix forgotten FARs
2015-11-18 14:01:17 -06:00
Paul A. Patience
bfc95c641f
stdlib: Fix forgotten FARs
2015-11-18 14:22:43 -05:00
Paul A. Patience
706218d18f
atoi(): Cast return value to int
2015-11-18 14:12:29 -05:00
Gregory Nutt
622ea95ab1
drivers/timers/ds3213.c: Extend to include support for the DS1307 RTC
2015-11-18 08:43:19 -06:00
Gregory Nutt
4579f0c1fc
Add a command to boardctl() to obtain a baord unique ID
2015-11-18 07:31:53 -06:00
Gregory Nutt
25c4ff8285
Update some comments
2015-11-17 16:29:34 -06:00
Gregory Nutt
c0a701b779
Merged in wail007/nuttx (pull request #33 )
...
Added a lower-half timer driver for stm32 which is compatible with the upper-half driver located at /drivers/timers/timer.c
2015-11-17 16:23:03 -06:00
Wail Khemir
09b9d6ba1f
Added a lower-half timer driver for stm32 which is compatible with the upper-half driver located at /drivers/timers/timer.c
2015-11-17 16:39:21 -05:00
Gregory Nutt
45530a77d4
Add support for DS3231 I2C RTC. Untested on initial commit.
2015-11-17 14:07:55 -06:00
Gregory Nutt
e61d51dab3
If multiple AT24xx devices are supported and resources are allocated, then it may also be necessary to free those resource
2015-11-17 08:39:06 -06:00
Gregory Nutt
f5722bc6dd
Merged in slorquet/nuttx/pca9555 (pull request #32 )
...
Pca9555 interrupt support.
2015-11-17 07:45:33 -06:00
Gregory Nutt
724901ceb9
Add support for multiple AT24xx EEPROM devices
2015-11-17 07:40:17 -06:00
Sebastien Lorquet
c7999141e7
Merge branch 'master' into pca9555
2015-11-17 14:12:03 +01:00
Sebastien Lorquet
826aadbce8
Include support for PCA9555 interrupt driven IO changes detection.
...
Currently using a signal, and a single notified task.
signal handling support moved to generic IO expander header (not pca specific)
2015-11-17 14:09:43 +01:00
Gregory Nutt
580529ba23
crypto/aes.c: Make refernce to key const
2015-11-16 14:30:43 -06:00
Gregory Nutt
c955cdccd9
Move rivers/wireless/cc3000/security.c to crypto/aes.c; move include/nuttx/wireless/cc3000/security.h to include/nuttx/crypto/aes.h
2015-11-16 13:31:02 -06:00
Gregory Nutt
815ec07b55
CAN: A minor improvement to can_txready design
2015-11-15 06:36:30 -06:00
Gregory Nutt
d6eb48d1ab
Update comments
2015-11-14 14:00:39 -06:00
Gregory Nutt
81ab270a96
CAN driver: Removing call to can_xmit() from can_txready() in a previous commit was a mistake. This commit restores the call to can_xmit(), but does the call in a safer environment on the work thread.
2015-11-14 10:33:02 -06:00
Sebastien Lorquet
8242600e5e
WIP for pca9555 irq
2015-11-13 16:28:46 +01:00
Gregory Nutt
fdb17620a0
Need a prototype for progmem_initialize in include/nuttx/mtd/mtd.h
2015-11-12 16:03:24 -06:00
Max Neklyudov
d54a39832a
Implement high level DMA infrastructure for serial devices
2015-11-12 14:16:19 -06:00
Gregory Nutt
ef59f83a38
drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h
2015-11-12 13:40:18 -06:00
Gregory Nutt
5eaf368d16
progmem.h: Cosmetic updates to comments
2015-11-12 12:30:15 -06:00
Gregory Nutt
7fe6200b0f
progmem.h: Clean-up a few comments
2015-11-11 14:30:06 -06:00
Gregory Nutt
e62673241d
Eliminate some useless comments
2015-11-11 11:02:52 -06:00
Gregory Nutt
965addb397
s25fl1: When unprotecting, handle case where protection bits are inverted. Add option to s25flinitilize() to unprotected on power up
2015-11-10 11:33:35 -06:00
Gregory Nutt
95562f8a86
CAN driver: More improved comments
2015-11-08 07:43:57 -06:00
Gregory Nutt
91429433f6
Correct naming of Spansion part. S25FL1, not ST25FL1
2015-11-07 11:51:09 -06:00
Paul A. Patience
4c70fc181a
ADC: Fix forgotten FARs
2015-11-05 10:27:47 -05:00
Gregory Nutt
c6fc285277
CAN: Add a new CAN upper-half interface, can_txready(), that can be used to break deadlock conditions in certain CAN hardware that supports queuing of TX messages
2015-11-03 10:52:58 -06:00
Gregory Nutt
51d29d3c97
Merged in paulpatience/nuttx/pwm (pull request #29 )
...
PWM: Add support for multiple output channels per timer
2015-11-01 16:40:06 -06:00
Paul A. Patience
e8c2466c1c
PWM: Add support for multiple output channels per timer
2015-11-01 17:15:12 -05:00
Gregory Nutt
fc91ded815
Add support for a general user LED lower-half driver
2015-11-01 14:57:22 -06:00
Gregory Nutt
0dea00177e
Add a generic user LED upper half discrete driver
2015-11-01 14:41:40 -06:00
Gregory Nutt
cbb78071b3
Rename ioexpander/ directories to discrete/
2015-11-01 13:14:48 -06:00
Gregory Nutt
56ad07f02b
Add standard naming for board user LED functions
2015-11-01 12:48:13 -06:00
Gregory Nutt
2318038bbc
Rename board_led_off to board_autoled_off
2015-11-01 09:10:40 -06:00
Gregory Nutt
8093def2c8
Rename board_led_on to board_autoled_on
2015-11-01 09:07:46 -06:00
Gregory Nutt
148d5fcffd
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:04:02 -06:00
Gregory Nutt
68c4dedb78
Named semaphores: Bad cast in sem_close(). Fixed by reordering fields of struct nsem_inode_s so that the cast will work
2015-10-23 07:13:47 +08:00
Gregory Nutt
d8731d0ef1
Add files missed in previous commit
2015-10-18 08:00:06 +08:00
Gregory Nutt
f5f69ef85d
Add a file missed in the last commit
2015-10-13 07:36:46 -06:00
Alan Carvalho de Assis
8f0c912fff
Add Zero Cross device driver support
2015-10-13 07:27:16 -06:00
Gregory Nutt
613798027e
Add a button upper/lower half driver
2015-10-12 14:29:43 -06:00
Gregory Nutt
1e6ffe7677
TMPFS update
2015-10-08 14:21:12 -06:00
Gregory Nutt
863ded3584
Standardize the width of all comment boxes in C header files
2015-10-03 07:45:15 -06:00
Gregory Nutt
0f90500f72
Standardize the width of all comment boxes in header files
2015-10-02 17:48:24 -06:00
Gregory Nutt
cb9e27c3b0
Standardize naming used for public data and function groupings
2015-10-02 16:30:35 -06:00
Gregory Nutt
38e6142ae8
Make coding style more conformant, take description from OpenGroup.org, rename formal parameters to match names used on OpenGroup.org
2015-10-02 12:58:40 -06:00
Gregory Nutt
2ba224eca2
Add support for bsearch() in C library
2015-10-02 12:33:58 -06:00
Alan Carvalho de Assis
c52e3e017b
Battery Charger: Add BQ24250 driver
2015-09-20 09:47:00 -06:00
Alan Carvalho de Assis
d4fc91d6f6
Add Battery Fault and Battery Disconnected status
2015-09-20 09:32:06 -06:00
Alan Carvalho de Assis
895ad29b0d
Fix IOCTL definition to avoid duplication and mess
2015-09-19 13:58:49 -06:00
Alan Carvalho de Assis
3cd7558a5e
Add basic infrastructure for Battery Charger
2015-09-19 13:06:43 -06:00
Alan Carvalho de Assis
9f465fc502
Rename battery.[ch] to battery_gauge.[ch]
2015-09-19 11:00:14 -06:00
Alan Carvalho de Assis
c4cf5be231
Add support to Maxim MAX31855 Thermocouple-to-Digital
2015-09-13 15:56:48 -06:00
Pierre-noel Bouteville
8651e0f2ca
CC3300: Add const to pointers in arguments to wlan_connect; remove an unused function prototype
2015-09-09 16:34:37 -06:00
Gregory Nutt
8a87e3ca6e
Add an empty function that can serve as a placeholder for the network shutdown() function
2015-09-09 07:03:05 -06:00
Sebastien Lorquet
77e4e7b231
Change all references from avsprintf to vasprintf. From Sebastien Lorquet
2015-09-07 13:22:13 -06:00
Paul A. Patience
c080146748
SSD1351 driver: add 8-bit parallel interface
2015-09-06 13:28:28 -04:00
Gregory Nutt
7d33e858dd
QSPI interface + ST25FL1 driver: Add methods to allocate properly aligned memory
2015-09-06 09:37:34 -06:00
Gregory Nutt
9c66bde5b0
Fix typo in pre-processor command noted by Pierre-noel Bouteville. Also move # of pre-processior command to column 1
2015-09-05 09:10:48 -06:00
Paul A. Patience
3b89eabd50
Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2.
2015-09-01 13:52:29 -04:00
Gregory Nutt
2d84270552
ST25FL1: Correct some compile problems when file system debug is enabled
2015-08-31 09:25:14 -06:00
Gregory Nutt
d6b0a8fe72
ST25FL1 driver is code complete
2015-08-29 15:58:54 -06:00
Gregory Nutt
bfc3c98e12
Move MTD ioctls commands from include/nuttx/fs/fs.h to include/nuttx/mtd/mtd.h. Add commands to protect and unprotect memory
2015-08-29 10:54:38 -06:00
Gregory Nutt
883c6a7cea
Merge remote-tracking branch 'origin/master' into st25fl1
2015-08-29 08:02:57 -06:00
Gregory Nutt
8c001f6807
Merged in paulpatience/nuttx (pull request #21 )
...
Add SSD1351 OLED controller support
2015-08-28 17:01:24 -06:00
Paul A. Patience
01b68e90d0
Add SSD1351 OLED controller support
2015-08-28 18:37:01 -04:00
Gregory Nutt
e392471dc2
QSPI interface: Add support for dual and quad read transfers; Add support for dummy read cycles.
2015-08-28 12:00:06 -06:00
Gregory Nutt
70bdf682af
QSPI: Add support for data vs command transfer
2015-08-28 10:15:08 -06:00
Gregory Nutt
361e35a7be
QSPI: Make changes to interface to better work with the SAMV71
2015-08-27 14:16:51 -06:00
Gregory Nutt
e6be3cea9f
Merge remote-tracking branch 'origin/master' into st25fl1
2015-08-26 10:44:35 -06:00
Gregory Nutt
7a168a791f
Networking: Fix loopback device MTU
2015-08-26 10:33:44 -06:00
Gregory Nutt
6dadfcbf6b
Add QSPI interface definition
2015-08-25 15:26:16 -06:00
Gregory Nutt
933d74e5c1
Networking: With these changes, I can ping the local loopback device from the simulator
2015-08-24 13:49:12 -06:00
Gregory Nutt
0b012c7978
Fix some initial loop back device compilation errors; mark configuration as EXPERIMENTAL
2015-08-24 11:29:54 -06:00
Gregory Nutt
07bdff9ef7
Networking: Add NetDB support for the local loopback device
2015-08-24 10:08:26 -06:00
Gregory Nutt
e21501c699
Merge remote-tracking branch 'origin/master' into localhost
2015-08-24 08:29:36 -06:00
