sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
5,219 Commits 1 Branch 0 Tags 291 MiB
da6c5aabdf
Commit Graph

4177 Commits

Author SHA1 Message Date
Gregory Nutt
da6c5aabdf All ARMV7-M IRQ setup: Always set the NVIC vector table address. This is needed in cases where the code is running with a bootload and when the code is running from RAM. It is also needed by the logic of up_ramvec_initialize() which gets the vector base address from the NVIC. Suggested by Pavel Pisa 2015-08-21 08:42:24 -06:00
Gregory Nutt
0b3b104b74 Remove unnecessary step in previous commit 2015-08-20 16:21:45 -06:00
Pavel Pisa
387f76d455 This fix allows to run NuttX from SRAM or to place it after bootloader when run from Flash. From Pavel Pisa 2015-08-20 07:46:18 -06:00
Gregory Nutt
5196a4183c SAMV7 USBHS device: Fix how we send data on control endpoints; fix how we select USB address 2015-08-19 11:36:38 -06:00
Gregory Nutt
0db7ac92d9 Minor coding style fixes in last commit; remove some unneeded debug output 2015-08-19 07:54:46 -06:00
SaeHie Park
75626fb071 STM32: Fix eth mem leak in recvframe 2015-08-19 15:40:04 +09:00
Gregory Nutt
cfd4f943da SAMV7 MCAN: When bitrate is changed, the MCAN has to be reset and there are lots of issues related to getting back to a healthy state if there is multithreaded access to the MCAN device. This commit handles a few of those issues, but there are more 2015-08-18 11:56:07 -06:00
Gregory Nutt
4b96605f93 SAMV7 MAN: Add support for bit timing IOCTL commands 2015-08-18 11:20:22 -06:00
Gregory Nutt
ff84e67e59 SAMV7 MCAN: Add logic to report CAN errors 2015-08-18 08:48:13 -06:00
Gregory Nutt
b7d6720a23 All CAN drivers: Set the new error indication to zero in the CAN message report 2015-08-18 07:24:12 -06:00
Gregory Nutt
c01d3298e5 Merged in paulpatience/nuttx-arch (pull request #5) 
Added definitions for STM32F303K6, STM32F303K8, STM32F303C6, STM32F303C8, STM32F303RD, and STM32F303RE devices.
 2015-08-17 12:55:32 -06:00
Paul A. Patience
c800841632 Added definitions for STM32F303K6, STM32F303K8, STM32F303C6, 
STM32F303C8, STM32F303RD, and STM32F303RE devices.
 2015-08-17 14:00:49 -04:00
Gregory Nutt
531456d20c Fix deadlock when closing the MCAN device driver 2015-08-17 11:49:20 -06:00
Gregory Nutt
4f122d5290 SAMV71 MCAN: Default clock source should be MCK, not MAIN 2015-08-17 11:03:15 -06:00
Gregory Nutt
ff38abf580 SAMV7 MCAN: Should support standard CAN IDs in extended ID mode 2015-08-17 10:52:58 -06:00
Gregory Nutt
ba6c0b3fa3 Fix more common typos 2015-08-16 11:06:29 -06:00
Gregory Nutt
e29220183a Fix some common typos 2015-08-16 10:59:10 -06:00
Gregory Nutt
9e5e91c204 SAMV7 USBHS device: Fix backward test of TXINIT. Driver now appears to be functional 2015-08-16 08:55:44 -06:00
Gregory Nutt
b503bf6ca1 SAMV7 USB device: Fix base address of USBHS RAM; remove a bad assertion; fix clearing of endpoint interrupts 2015-08-15 13:00:32 -06:00
Gregory Nutt
9d7301f474 SAMV7 USBHS device: Need to enable endpoint before configuring it; Check for USB suspended backward 2015-08-15 10:41:15 -06:00
Gregory Nutt
651317ee49 SAML21: Various SERCOM fixes 2015-08-14 18:11:02 -06:00
Gregory Nutt
348060f5d2 SAMV7: Add QSPI Register Definition Header File 2015-08-14 18:11:01 -06:00
Gregory Nutt
150f79a198 Backout commit e03b47b6e28ca98a6cc8497ad822309de5153eb3 2015-08-14 10:24:56 -06:00
Gregory Nutt
a44a208ff6 SAMV71 MCAN: Change Kconfig so that zero is no longer the default value for the size of RXFIFO0, RXFIFO1, and TXFIFIQ. In fact, zero is not an illegal value 2015-08-13 08:13:49 -06:00
Gregory Nutt
bef5eb0bc9 Fix a typo in a preprocessor warning 2015-08-12 15:32:46 -06:00
Gregory Nutt
b9d4ead73f SAMV7 MCAN: Correct usage of PCLK prescaler. From Frank Benkert 2015-08-12 11:17:03 -06:00
Gregory Nutt
53638b10dc SAMV7 USBHS device: Modify how ATTACH is performed if the use host has already reset 2015-08-12 11:13:18 -06:00
Gregory Nutt
68932c02d3 Fix typos in SAMV7 MCAN. From Frank Benkert 2015-08-12 08:17:50 -06:00
Gregory Nutt
2264c1fa64 SAMV7 USB: USB must be enabled before PMC 480MHz clock is enabled 2015-08-11 15:48:26 -06:00
Gregory Nutt
f3d1c19965 SAMV7 SPI slave: Loop in the interrupt handler; RDRF and TXNE events should occur very closely in time 2015-08-11 09:30:24 -06:00
Gregory Nutt
27733a6731 Trivial spacing change 2015-08-11 07:51:31 -06:00
Gregory Nutt
9f4e033f4c MoxART: Trivial changes from code review 2015-08-10 11:05:09 -06:00
Gregory Nutt
8de9d3f014 Merged in rnouse/nuttx-arch (pull request #4) 
Add Shared IRQ support for UART w/multi port.
 2015-08-10 10:11:43 -06:00
Gregory Nutt
c8c470271f SAMV7 SPI Slave: Completes implementation basic, no-DMA driver 2015-08-10 10:05:00 -06:00
Anton D. Kachalov
f10b7ff09a Merge branch 'master' of https://bitbucket.org/nuttx/arch 2015-08-10 18:14:49 +03:00
Anton D. Kachalov
46444388fa Add Shared IRQ support for UART w/multi port. 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-10 18:13:35 +03:00
Gregory Nutt
c7b0a35e85 Rename sam_spi_slave_initialize to up_spi_slave_initialize for better symmety with the Master SPI interface definition 2015-08-09 17:41:55 -06:00
Gregory Nutt
ec68d00ed8 A few more cosmetic changes to the SAMV7 SPI slave driver-in-progress 2015-08-09 16:21:49 -06:00
Gregory Nutt
1fbd5351ff Fix typo in a Kconfig file 2015-08-09 15:50:04 -06:00
Gregory Nutt
c7eaa00ed4 SAMV7 SPI slave: Add output queuing and interrupt handling 2015-08-09 15:42:32 -06:00
Gregory Nutt
5f4224115a SAMV7 SPI Slave: Add a basic driver framework for SPI slave. Still a lot of missing logic 2015-08-09 12:04:43 -06:00
Gregory Nutt
7e7150899a SAMV7: Add configuration options to select SPI slave (slave driver not yet committed) 2015-08-09 09:47:06 -06:00
Gregory Nutt
05aae51c89 SAMV7 MCAN: Lock the scheduler at one critical point to avoid a possible race condition 2015-08-09 08:41:57 -06:00
Gregory Nutt
7a6bdf286e SAMV7 MCAN: Add some precautions to assue that a counting semaphore does not get out of synch 2015-08-08 08:38:52 -06:00
Gregory Nutt
a7a52252a8 SAMV7 MCAN: Fix DCACHE configuration dependency; Mkae sure DMA buffers are aligned to the cache line size at the end, Make RX FIFO1 the high priority FIFO and it it preference for RX input 2015-08-07 12:31:01 -06:00
Gregory Nutt
75ce247ed1 Use message sized defined in can.h 2015-08-07 09:01:30 -06:00
Gregory Nutt
aea94d9525 SAMV7 MCAN: Add support for all filter modes 2015-08-07 08:23:21 -06:00
Gregory Nutt
955202b895 Grr.. typos crept in during the last minute clean-up of the previous fix 8( 2015-08-06 12:50:11 -06:00
Gregory Nutt
32900bdb0b SAMV71 MCAN: Fix standard ID mask 2015-08-06 12:47:14 -06:00
Gregory Nutt
f7bcff3d12 SAMV7 MCAN: Fix filter configuration when now filters are defined. We need to accept all messages in this case 2015-08-06 11:50:41 -06:00