sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
33,189 Commits 1 Branch 0 Tags 291 MiB
dafa180d8d
Commit Graph

33189 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Sakari Kapanen
dafa180d8d nuttx/drivers/usbdev/rndis.c: Account for CONFIG_NET_GUARDSIZE in allocation of packet buffer 
nuttx/drivers/usbdev/rndis.c:  Make USB device parameters configurable
 2018-10-24 09:06:09 -06:00
Gregory Nutt
4901710fc7 Dave Marples refinements should be applied to the LPC54 as well 2018-10-24 08:29:17 -06:00
Dave Marples
2b0f680349 Some small refinements to commit 98f268b303 2018-10-23 17:32:26 -06:00
David Sidrane
92e4a7223c Merged in david_s5/nuttx/master_imxrt (pull request #737) 
Master imxrt

* imxrt:Fix typos bit# and names

* imxrt:wdog Registers are 16 Bits

* imxrt:wdog Update has to be within 255 clocks of unlock

* imxrt:clockconfig Fix comments

* imxrt1050-evk:board.h Fix comments

* imxrt:imxrt_ccm.h Define Mux Selects for board.h use

* imxrt:clockconfig Allow better control from board.h

       1) Allows a board config clock setting to be defined
       in terms of the /n values shown in Figure 18-2.
       Clock Tree of the i.MX RT1050 Processor Reference
       Manual, Rev. 1, 03/2018

       2) Allows the clock multipelx selection to be made in
       The board config.

* imxrt1050-evk:Define board clocking based on divisor and muxes

Approved-by: GregoryN <gnutt@nuttx.org>
 2018-10-23 22:54:28 +00:00
Gregory Nutt
37fafccaa1 arch/arm/src/lpc54xx/lpc54_sdmmc.c: This commit ports Dave Marple's patch for the LPC43 SD/MMC to the LPC54. See commit 98f268b303 2018-10-23 10:51:54 -06:00
Dave Marples
98f268b303 arch/arm/src/lpc43xx/lpc43_sdmmc.c: This commit corrects a problem in lpc43_dmasendsetup(). There was no linked DMA descriptor code on the send side. The end result was stalls while sending multiple sectors. This commit addes that in and the send code is working much better. 2018-10-23 10:47:52 -06:00
Gregory Nutt
729b2e1907 arch/arm/src/lpc43xx/Kconfig: Restored dependency on EXPERIMENTAL for LPC43_SDMMC. 2018-10-23 06:22:40 -06:00
Gregory Nutt
41ebb6d672 arch/arm/src/lpc54xx/lpc54_sdmmc.c: Tested Dave Marple's LPC43 fix with the LPC54. Does not work. This commit adds support for and SDMMC errata and setting of the delay register which was missing in the previous commit. It appears that now I can read the SD card successfully, but I get CRC errors when writing to the card. 2018-10-22 09:35:02 -06:00
Jussi Kivilinna
06c6b0ce1b arch/arm/src/stm32f7/stm32_flash.c: Allow programming OTP blocks through progmem interface 2018-10-22 06:17:18 -06:00
Gregory Nutt
4b0327d845 arch/arm/src/lpc54/lpc54_sdmmc: Port Dave Marple's LPC43 USB DCD fix to the LPC54 with appropriate changed. 2018-10-21 17:55:51 -06:00
Dave Marples
b71e0a199a iFix the LPC4330 family SDMMC card access. Some of these fixes (e.g. DELAY register) may also be applicable elsewhere. These are _NOT_ extensively tested, but they are certainly better than the current state of the driver. The fixes, specifically, are; 
* Clocks were wrongly configured - way too fast because there is no primary divider on LPC4330

This is fixed by means of changing the definitions in the board.h file. I've edited the one for the lpc4330-xplorer board because I'm actually working with Versiboard and don't want to contribute that config just yet while I've still got the drains up on it.

* The LPC43_SDMMC_DELAY register was not being set

I suspect, in the 'real world', it's possible to get away without setting this, but I've added a register definition, default value and register access macros into arch/arm/src/lpc43xx/chip/lpc43_scu.h and then used them in arch/arm/src/lpc43xx/lpc43_sdmmc.c.

* The LPC43_SDMMC_BLKSIZ and LPC43_SDMMC_BYTECNT registers had the wrong values.

The management have already implemented a rather nice block level interface for the stm32 so I've just re-used that to write to these registers as required. I'm slightly nervous that accessing the configuration registers (SCR being the prime example) which has a much smaller block size may not be being done in the right way but it does seem to work correctly, so let's assume it's all OK until someone tells me otherwise.

These fixes have been tested with DMA-based read/write on a LPC4330. Speed via nsh is pretty low but I'm assuming that's just a buffering/implementation issue for now.
 2018-10-21 17:22:22 -06:00
Gregory Nutt
21d2dfc80b Trivial update to coding standard document. 2018-10-21 17:21:52 -06:00
Gregory Nutt
fb3dc07a42 configs/lpcxpresso-lpc54628/include/board.h: Update logic used to calculate SDMMC input clock divider. 2018-10-21 08:41:36 -06:00
Gregory Nutt
805c1bc2b9 Cosmetic changes for coding standard fixes. 2018-10-20 18:15:44 -06:00
Gregory Nutt
a85f0e4cd5 networking: Update some comments to correct the naming used for the link layer. 2018-10-20 06:35:39 -06:00
Gregory Nutt
1fcd70fdb9 arch/arm/src/stm32/stm32_pwm.c: Fix a compilation error introduced in recent PR. Found in build testing. 2018-10-19 16:21:50 -06:00
Daniel P. Carvalho
3abe871a80 drivers/sensors/ina226.c: Add INA226 device driver. 2018-10-19 09:04:56 -06:00
Gregory Nutt
b732afc718 arch/arm/src/stm32: Costmetic changes from review of last PR. 2018-10-18 10:44:23 -06:00
Daniel Agar
cfc5b59636 Merged in dagar/nuttx/pr-stm32_dma_per_spi (pull request #736) 
stm32 enable separate DMA per SPI configuration

Approved-by: GregoryN <gnutt@nuttx.org>
 2018-10-18 16:36:14 +00:00
Gregory Nutt
60d490f9b1 configs/bambino-200e/include/board.h: Correct calculation of SDMMC clock configuration. The LPC43 has no SDMMC source clock divider. Error noted by Dave Marples. 2018-10-18 10:01:46 -06:00
Ken Pettit
aa9771751b drivers/mtd/s25fl1.c: During a MTDIOC_GEOMETRY ioctl call, the driver was incorrectly reporting the blocksize to be the same as the erasesize. The blocksize should be 256 (the page size). This patch fixes that, and now the SmartFS configration is working. 2018-10-18 07:02:02 -06:00
David Sidrane
9547b186df Merged in david_s5/nuttx/Lampoo-master-spi-flash (pull request #735) 
drivers/mtd: add support to Macronix MX25LF25635F serial NOR flash

Approved-by: GregoryN <gnutt@nuttx.org>
 2018-10-17 23:24:45 +00:00
Gregory Nutt
986bbf3ae7 configs/pcblogic-pic32mx: Remove support for the PCB Logic PIC32MX board. I do not find any references to PCB Logic on the web and I do not believe that this breakout board is available any longer. 2018-10-17 11:33:54 -06:00
Ouss4
d3d67508a3 arch/mips/src/mips32/Toolchain.defs: Add toolchain flags for the pinguino toolchain under Linux. 2018-10-16 12:25:37 -06:00
Ouss4
3a594d5a1f arch/mips/src/pic32mz/pic32mz-head.S: Initialize the global pointer in all shadow sets. 2018-10-16 12:25:37 -06:00
Ouss4
f7e4f614ef arch/mips/src/pic32mz/pic32mz-serial.c: Fix a typo in assignment of TTYS0 to UART6 2018-10-16 12:25:37 -06:00
Mateusz Szafoni
6e18a32b3f Merged in raiden00/nuttx_pe (pull request #734) 
stm32_pwm: break and lock configuration and some cosmetics

Approved-by: GregoryN <gnutt@nuttx.org>
 2018-10-15 17:18:38 +00:00
Mateusz Szafoni
632bba3af8 Merged in raiden00/nuttx_pe (pull request #733) 
Improvements in STM32 PWM low level driver

stm32_pwm: remove some impossible PWM configurations

stm32_pwm: support for complementary outputs

stm32_pwm: deadtime configuration

stm32_pwm: output polarity and IDLE state configuration

nucleo-f302r8: pwm support

stm32f429i-disco: pwm support

configs: update some configurations according to changes in STM32 PWM driver

Approved-by: GregoryN <gnutt@nuttx.org>
 2018-10-14 14:08:52 +00:00
Ivan Ucherdzhiev
42f1f8898b /arch/arm/src/imxrt/imxrt_lpi2c.c: Fixes 2 bugs in the for IMXRT1050: (1) I2C time out and did not send STOP condition when sending single byte, (2) I2C could not receive bytes after repeated start. 2018-10-13 06:38:33 -06:00
Gregory Nutt
2deaab261f arch/arm/src/lpc43xx/lpc43_serial.c: Fix some minor typos in comments. 2018-10-12 17:07:04 -06:00
Dave Marples
9713e0768d arch/arm/src/lpc43xx/lpc43_serial.c: Fix copy-paste error: g_usart1port->g_uart1port. 2018-10-12 17:03:50 -06:00
Gregory Nutt
706b20a49f fs/vfs/fs_read.c: Elimnate a warning noted by Anonymouns in Issue 124. 2018-10-12 14:58:21 -06:00
Gregory Nutt
4d75901cc4 arch/mips/include/mips32/cp0.h: Fix some copy-paste errors that cause malformed comments and syntax errors when certain CP0 CONFIG1 bits are referenced. Note in Issue 123 by Anonymous. 2018-10-12 14:52:05 -06:00
Gregory Nutt
c6c9064464 EFM32, Kinetis, BCM2708: Juha Niskanen's fix of commit 4a32325e3c also applies to BCM2708, EFM32, and Kinetis. 2018-10-10 06:45:03 -06:00
Juha Niskanen
4a32325e3c stm32f0, stm32f7, stm32h7, stm32l4 serial: fix use of CONFIG_SERIAL_IFLOWCONTROL for CONFIG_SERIAL_OFLOWCONTROL 2018-10-10 06:29:29 -06:00
Juha Niskanen
167663462f arch/arm/src/stm32f7/stm32_serial.c: force invalidate of data cache after DMA re-enable when returning from low-power mode 2018-10-09 06:35:43 -06:00
Gregory Nutt
68c8a4c5a2 Update TODO list, Kconfig help text. 2018-10-08 14:45:00 -06:00
Gregory Nutt
378aa1a055 drivers/wireless/ieee80211/Kconfig: Update Kconfig help text. 2018-10-08 09:03:42 -06:00
Gregory Nutt
31e4981192 drivers/wireless/ieee802.11: Extend Add capabilility to get firmware from a mounted file system to BCM43362. Also fix some compile/link issues introduced in the previous commit. 2018-10-07 15:00:13 -06:00
Ramtin Amin
b539d04cfb drivers/wireless/ieee802.11: Add capabilility for Broadcom chips to get firmware and CLM data from a mounted file system vs. in-memory data structures. 2018-10-07 10:03:39 -06:00
Gregory Nutt
646cf35e54 Trivial update to README files. 2018-10-07 09:15:11 -06:00
Gregory Nutt
6483b592ff configs/olimex-lpc1766stk/hidkbd: Add a configuration for testing the HID keyboard. 2018-10-07 07:28:51 -06:00
GregoryN
9633a44217 configs/olimex-lpc1766stk/src/lpc17_bringup.c: Remove unnecessary include. 2018-10-07 01:40:00 +00:00
Gregory Nutt
6a353b91bd configs/olimex-lpc1766stk: Add support to initialize a USB HID keyboard. Still don't have a working configuration. Seems to require a lot of transfer descriptors. Also reorganized some logic. It has been a long time since the Olimex LPC1766-STK has had any TLC. 2018-10-06 18:06:47 -06:00
Gregory Nutt
cfe5d1148f configs/olimex-stm32-p407: Added a HID keyboard configuration. 2018-10-06 11:43:19 -06:00
Gregory Nutt
efe2ff3933 libs/libc/stdio/Kconfig: Commit d0254b1c79 removed all usage of CONFIG_NOPRINTF_FIELDWIDTH but failed to remove the selection from the Kconfig file. 2018-10-06 10:33:29 -06:00
Gregory Nutt
0487fa90f8 libs/libc/stdio/lib_libvsprintf.c: Correct another discrepancy between NuttX printf() output and glibc printf() output. 2018-10-06 09:57:06 -06:00
Gregory Nutt
82d1c17cd8 arch/arm/src/stm32/stm32_allocateheap.c: Eliminate warning, 'CONFIG_STM32_HAVE_CCM is not defined. 2018-10-05 16:53:23 -06:00
Gregory Nutt
079fedaa3d Update TODO list. Costmetic (only) changes to libs/libc/stdio/lib_libvsprintf.c 2018-10-05 16:09:53 -06:00
Gregory Nutt
055810d9a4 libs/libc/stdio/lib_libvsprintf.c: Correct handling of integer 'precision' in all justification types for values 9, 99, 999, 9999, 99999: 
Right justification:
  009   099   999  9999 99999  %5.3u
    9    99   999  9999 99999  %5u

Right justification, zero padding
  009   099   999  9999 99999  %05.3u
00009 00099 00999 09999 99999  %05u

Left justification
009   099   999   9999  99999  %-5.3u
9     99    999   9999  99999  %-5u
 2018-10-05 13:54:36 -06:00