2 Commits

Author	SHA1	Message	Date
Gregory Nutt	db0641556e	boards/arm/s32k1xx/s32k118evb: Implement board support for LEDs and buttons. This is taken from the Freedom-K66f with has the same LED and button configuation as the S32K116EVB and uses the same GPIO IP. ... boards/arm/s32k1xx/s32k118evb/include/board.h: Add LPUART0 pin disambiguation. arch/arm/src/s32k1xx/hardware: Add pin mux definitions for S32K116, 118, 142, 144, 146, and 148. arch/arm/src/s32k1xx/s32k1xx_pin.c and .h: Add support for PIDR register that disables a gneral purpose pin from acting as an input. arch/arm/src/s32k1xx/s32k1xx_pin.c and .h: The device does not support slew rate controls or open drain (on all the pins). Only pins that are configured for a protocol that requires open-drain (e.g;, LPI2C, LPUART single-wire) will work in open-drain mode.	2019-08-18 12:02:54 -06:00
Gregory Nutt	8987a9e374	This commit adds initial board support for the NXP S32K118EVB. This configuration is intended, initially, to support development of the architecture support. This is VERY much a work in progress and you should not use this configuration unless you are interested in assisting with the bring-up. ... Squashed commit of the following: boards/arm/s32k1xx/s32k118evb/configs/nsh: Add a basic NSH configuration. boards/arm/s32k1xx/s32k118evb/scripts: Add linker scripts and Make.defs. configs/: Hook the S32K118EVB board into the configuration system. boards/arm/s32k1xx/s32k118evb: Add initial support for the NXP S32K118EVB.	2019-08-14 08:47:35 -06:00