1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
This small fix ensures all DMA pointers are correctly reseted during
DMA setup (when the driver is opened). Without this there could be rare
occurrence of driver pointer to incorrect (invalidate) DMA buffer and thus
saving incorrect characters to upper layer.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Circular buffer does not use DMA linked list therefore function
sam_freelinklist() cannot be called as it would fail on assertion (csa
not defined). Peripheral that calls DMA should care of buffer invalidation
instead.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Port based on arch/arm/nrf53.
Modem not fully supported yet. At the moment, initialization and AT interface work.
Sockets and GNSS interface will be added later.
Reference:https://xpack.github.io/blog/2022/05/18/riscv-none-elf-gcc-v12-1-0-2-released/
RISC-V ISA updates
Compared to previous releases, starting from 12.x, the compiler implements the new RISC-V ISA, which introduces an incompatibility issue, and builds might throw error messages like unrecognized opcode csrr.
The reason is that csr read/write (csrr*/csrw*) instructions and fence.i instruction were separated from the I extension, becoming two standalone extensions: Zicsr and Zifencei.
The solution is to add _zicsr and/or _zifencei to the -march option, e.g. -march=rv32imac becomes -march=rv32imac_zicsr_zifencei.
Initialize ICACHE way with correct mask.
Initialize scratchpad with constant g_init_marker as it has been done in HSS
Signed-off-by: Jani Paalijarvi <jani.paalijarvi@unikie.com>
Summary:
- I noticed that arm64_gic_raise_sgi() is not implemented for
GICv2 which is used for SMP + hypervisor such as qemu + kvm.
- This commit fixes this issue
Impact:
- None
Testing:
- Tested with qemu-7.1 + kvm (linux) and qemu-7.1 + hvf (macOS)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed that pcsi version can not be obtained with qemu + kvm.
- Also, pci_detect hangs with qemu + hvf.
- This commit fixes this issue by using hvc (hypervisor call).
Impact:
- None
Testing:
- Tested with qemu-7.1 + kvm (linux) and qemu-7.1 + hvf (macOS)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- During testing with qemu + kvm, I noticed that nuttx hangs
when setting cntfrq_el0. With qemu + kvm, it starts from
EL1 because we can not specify virtualization=on
- However, I noticed that it works without setting cntfrq_el0
- This commit fixes this issue
Impact:
- None
Testing:
- Tested with qemu-7.1 (both with kvm and without kvm)
- NOTE: to work with kvm, GICv2 must be used.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
CONFIG_ARM_TOOLCHAIN_GNU_EABI build got broken when -mthumb option was moved
from ARCHCPUFLAGS to ARCHOPTIMIZATION variable:
arm-none-eabi-ld: error: .../build/nuttx/nuttx uses VFP register arguments, /usr/lib/gcc/arm-none-eabi/5.4.1/libgcc.a(_fixunsdfdi.o) does not
arm-none-eabi-ld: failed to merge target specific data of file /usr/lib/gcc/arm-none-eabi/5.4.1/libgcc.a(_fixunsdfdi.o)
arm-none-eabi-ld: error: .../build/nuttx/nuttx uses VFP register arguments, /usr/lib/gcc/arm-none-eabi/5.4.1/libgcc.a(_udivmoddi4.o) does not
arm-none-eabi-ld: failed to merge target specific data of file /usr/lib/gcc/arm-none-eabi/5.4.1/libgcc.a(_udivmoddi4.o)
Changes the executable type built against the `make export` target fully linked by default. This greatly improves performance when loading applications, as relocations no longer need to be processed.
This change allows boards to define an additional kconfig option, which specifies the final link format of application executables.
By selecting `CONFIG_BINFMT_ELF_RELOCATABLE`, and providing an appropriate linker script, applications can be fully linked, removing the need to process relocations.
In the default configuration, the Litex ethernet peripheral contains two RX and two TX buffers. The active buffer for the peripheral should be swapped as soon as possible, in order to reduce packet loss.
This modification acknowledges the receive buffer as soon as the pending data is copied into the NuttX device data buffer. Improving reliability under heavy load.
since symbols defined in arch/elf.h is also used in other case, for example:
CC: pthread/pthread_testcancel.c machine/arm/gnu_unwind_find_exidx.c:32:8: error: unknown type name '__EIT_entry'
32 | static __EIT_entry *__exidx_start_elf;
| ^~~~~~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
The following macros
__ARCH_ARM_SRC_STM32F7_HARDWARE_STM32F74XX75XX_FLASH_H
__ARCH_ARM_SRC_STM32L4_HARDWARE_STM32L4X6XX_RCC_H
are used in other header files.
Signed-off-by: Mingjie Shen <shen497@purdue.edu>
