Gregory Nutt
dda0ac8b21
Update comments
2016-11-26 11:06:24 -06:00
Gregory Nutt
9376296e99
Merge remote-tracking branch 'origin/master' into imx6-smp
2016-11-26 11:02:55 -06:00
Gregory Nutt
8bacb1e426
Update comments
2016-11-26 11:02:21 -06:00
Gregory Nutt
bdf570ea08
Fix typos in comments
2016-11-26 10:42:25 -06:00
Gregory Nutt
2fba04f752
i.MX6 SMP: Beginning of non-cacheable region (incomplete)
2016-11-26 10:37:06 -06:00
Gregory Nutt
61b45a8544
i.MX6: Add some comments
2016-11-26 09:27:29 -06:00
Gregory Nutt
e3fe320e08
SMP: Add support for linking spinlocks into a special, non-cached memory region.
2016-11-26 08:47:03 -06:00
Maciej Wójcik
0d0b1b64e2
Fix for F1 RTC Clock, tested on F103
2016-11-25 06:17:18 +01:00
Gregory Nutt
b08fb33c28
SMP: Fix typos in some conditional compilation
2016-11-24 17:59:45 -06:00
Gregory Nutt
7f636f2280
SMP: Add spin_trylock(). Use this in conditions where other CPUs need to stopped but we cannot call enter_critical_section.
2016-11-24 13:33:43 -06:00
Gregory Nutt
f77dcdf323
ARMv7-A SMP: Add a little logic to signal handling.
2016-11-24 11:45:05 -06:00
Gregory Nutt
c03d126da6
arm_cpupause.c edited online with Bitbucke. What was I thinking... Back out previous change.
2016-11-24 04:45:07 +00:00
Gregory Nutt
19e7f2210e
arm_cpupause.c edited online with Bitbucket. Fix a typo in a comment.
2016-11-24 04:24:40 +00:00
Gregory Nutt
4b0bbf41ca
SMP: Fix backward condition in test.
2016-11-23 22:24:14 -06:00
Alan Carvalho de Assis
7dbc25b02b
LPC43xx: Add timer driver; configs/bambino-200e: Add support for timer driver
2016-11-23 13:33:51 -06:00
Gregory Nutt
f90525a5d1
SMP: Update some comments; trivial improvement by inlining static function.
2016-11-22 16:48:57 -06:00
Gregory Nutt
12f830ffd5
SAM3/4: Name of method is now setcallback, not sethandler
2016-11-22 12:06:07 -06:00
Gregory Nutt
bac7153609
SMP: Add logic to avoid a deadlock condition when CPU1 is hung waiting for g_cpu_irqlock and CPU0 is waitin for g_cpu_paused
2016-11-22 11:34:16 -06:00
Sebastien Lorquet
ec586ab350
implementation of dumpgpio for stm32l4, was required for pwm debug.
2016-11-22 07:57:21 -06:00
Gregory Nutt
130bfa3f6b
Remove a assertion condition that appears to rarely cause false-alarm assertions. Teported by Petteri Aimonen
2016-11-21 14:43:56 -06:00
Gregory Nutt
f53e48199f
Simplify and document some macros
2016-11-21 13:12:43 -06:00
Gregory Nutt
558784d06f
Spinlocks: Added capability to provide architecture-specific memory barriers. This was for i.MX6 but does not help with the SMP problems. It is still a good feature.
2016-11-21 11:55:59 -06:00
Gregory Nutt
0804286ad3
arch/: Add option to use low-priority work queue to all Ethernet drivers in arch that support CONFIG_NET_NOINTS.
2016-11-19 09:20:01 -06:00
Gregory Nutt
0db99b8c89
Trivial fix from review of last PR
2016-11-19 06:52:51 -06:00
Gregory Nutt
8705ce816a
Merged in gnagflow/nuttx (pull request #173 )
...
Master
2016-11-19 12:49:56 +00:00
Wolfgang Reißnegger
b23c1f8817
Typo fix in sam_udp.c
2016-11-18 17:23:22 -08:00
Wolfgang Reißnegger
d135246a7d
SAM3/4: Remove 'stalled' flag in UDP driver.
...
The flag is not necessary. The state of the endpoint can be determined
using 'epstate' instead.
2016-11-18 17:23:21 -08:00
Wolfgang Reißnegger
9e349f4335
SAM3/4: Remove unused 'halted' flag in UDP driver.
2016-11-18 17:23:21 -08:00
Wolfgang Reißnegger
c7ef82c546
SAM3/4: Add delay between setting and clearing the endpoint RESET bit in sam_ep_resume().
...
We need to add a delay between setting and clearing the endpoint reset
bit in SAM_UDP_RSTEP. Without the delay the USB controller will (may?)
not reset the endpoint.
If the endpoint is not being reset, the Data Toggle (DTGLE) bit will
not to be cleared which will cause the next transaction to fail if
DTGLE is 1. If that happens the host will time-out and reset the bus.
Adding this delay may also fix the USBMSC_STALL_RACEWAR in
usbmsc_scsi.c, however this has not been verified yet.
2016-11-18 17:23:21 -08:00
Paul A. Patience
8d9804d57b
STM32: STM32F303xB and STM32F303xC chips have 4 ADCs
2016-11-18 19:28:09 -05:00
Gregory Nutt
f92afbfbf3
apps/examples/timer: Restore the timer example, but adapt the interface to use the new signal logic from Sebastien, Lorquet. Totally untested and probably does not work!
2016-11-17 15:19:17 -06:00
Gregory Nutt
19c1c9d78b
All timer lower half drivers. Port Sebastien's changes to all all other implementations of the timer lower half. Very many just and untested. Expect some problems.
2016-11-17 15:03:31 -06:00
Sebastien Lorquet
197cec58d2
timer driver: Use signal to notify of timer expiration. Add generic argument so that there can be additional usage.
2016-11-17 14:38:21 -06:00
Gregory Nutt
18ad40b98c
ARMv7-M: Fix double allocation of MPU region in mmu.h
2016-11-17 13:37:24 -06:00
Gregory Nutt
bb19f1b499
spinlocks should be volatile.
2016-11-17 10:04:22 -06:00
Kolb, Stefan
bf096873a1
SAMV7 USBDEVHS: A problem occurred if the USB cable is unplugged while a large amount of data is send over an IN endpoint using DMA. If the USB cable is plugged in again after a few seconds it is not possible to send data over this IN endpoint again, all other endpoints work as expected.
...
The problem occurs because if the USB cable is unplugged while an DMA transfer is in flight the transfer is canceled but the register SAM_USBHS_DEVDMACTRL is left in an undefined state. The problem was fixed the problem by resetting the register SAM_USBHS_DEVDMACTRL to a known state. Additionally all pending interrupts are cleared.
2016-11-14 10:32:49 -06:00
Sebastien Lorquet
98088a7456
typos
2016-11-09 19:52:29 +01:00
Sebastien Lorquet
a9c66683f2
Change the way to configure quadrature encoder prescalers.
2016-11-09 19:16:44 +01:00
Gregory Nutt
3cb1e0e67f
STM32F7: Fix Make.defs. Would not work if only SDMMC2 were enabled.
2016-11-07 09:37:22 -06:00
Marc Rechté
eb9a8ed790
STM37xx PWM: Add PWM driver support for STMF37xx. The changes have been tested successfuly for TIM4 and TIM17 (different IPs).
2016-11-07 09:35:48 -06:00
Gregory Nutt
1344d8b466
STM32F746-WS: A few repairs to the nsh/defconfig for USB support.
2016-11-07 09:20:47 -06:00
Gregory Nutt
dd04d73afe
STM32F7 SD/MMC driver depends on CONFIG_SDIO_DMA which is only defined in stm32/Kconfig. Changed to CONFIG_STM32F7_SDMMC_DMA and defined in stm32f7/Kconfig.
2016-11-07 09:16:34 -06:00
Gregory Nutt
ac6581acec
Changes from review of last PR
2016-11-07 08:28:39 -06:00
Gregory Nutt
261aef1e0d
Merged in petekol/nuttxnsm (pull request #168 )
...
stm32f7 important usb fixes
2016-11-07 14:08:00 +00:00
Lok Tep
d6315a3084
del stm32f74xx75xx_sdmmc.h
2016-11-07 13:12:52 +01:00
Gregory Nutt
89c3c20052
Merge remote-tracking branch 'origin/master' into misoc
2016-11-06 11:09:05 -06:00
Gregory Nutt
c1a687a4e5
Trivial changes from review of last PR
2016-11-06 08:11:01 -06:00
Heesub Shin
bda7d9ee4d
ARMv7-R: fix to restore the Thumb flag in CPSR
...
Thumb flag in CPSR is not restored back when the context switch occurs
while executing thumb instruction.
Reported-by: Eunbong Song <eunb.song@samsung.com>
Signed-off-by: Byoungtae Cho <bt.cho@samsung.com>
Signed-off-by: Heesub Shin <heesub.shin@samsung.com>
2016-11-06 21:48:02 +09:00
Heesub Shin
343243c7c0
ARMv7-R: fix CPSR corruption after exception handling
...
A sporadic hang with consequent crash is observed when booting:
arm_prefetchabort: Prefetch abort. PC: 04d34a00 IFAR: 04d34a00 IFSR: 00000008
up_assert: Assertion failed at file:armv7-r/arm_prefetchabort.c line: 87 task: init
up_dumpstate: Current sp: 004c3df0
up_dumpstate: Interrupt stack:
up_dumpstate: base: 004c05fc
up_dumpstate: size: 00000800
up_dumpstate: User stack:
up_dumpstate: base: 004c3f58
up_dumpstate: size: 00000fec
up_dumpstate: User Stack
up_stackdump: 004c3de0: 004a0d14 004c3df0 004c3f58 004a0d20 00000057 004c2c58 09000000 004a42a4
up_stackdump: 004c3e00: 00000003 004c3e10 004a0f1c 004bbcef 33c44b00 004a0f28 04d34a00 00000008
up_stackdump: 004c3e20: 00000008 004a01bc 004bfd38 00000001 00007fff 00000001 34134a00 d83e4c00
up_stackdump: 004c3e40: 09000000 00000000 33c44b00 d83e4c00 0c3f4c00 00000000 00000000 00000003
up_stackdump: 004c3e60: 004c3e70 004a1494 04d34a00 200b0253 004c3ed8 004a5298 004c3ed8 6d00006d
up_stackdump: 004c3e80: 0000006d 004bc3f4 00000009 004a4f64 00000009 b9e0784f 333f3ed0 69d4227d
up_stackdump: 004c3ea0: d81f09bd 0f867344 5a7e2c12 8acefd34 5d00dc1b 004bc432 004c3f08 004c0e08
up_stackdump: 004c3ec0: 00000000 00000000 00000000 00000000 00000000 004a4210 004a5258 004a5300
up_stackdump: 004c3ee0: 00000000 00000001 ffffffff 004c3f80 000002b0 004a4234 00000007 004c3f08
up_stackdump: 004c3f00: 004a58b4 004bc432 004bc3f4 004c3f80 000002b0 0000029c 00000000 0000029c
up_stackdump: 004c3f20: 00000000 004a5900 0000ff01 00000000 00000000 004a61f4 00000000 004a5fa4
up_stackdump: 004c3f40: 00000000 004a5f6c 00000000 004a2668 00000000 00000000 b7509f04 004c3f64
up_registerdump: R0: 00000001 00007fff 00000001 34134a00 d83e4c00 09000000 00000000 33c44b00
up_registerdump: R8: d83e4c00 0c3f4c00 00000000 00000000 00000003 004c3e70 004a1494 04d34a00
up_registerdump: CPSR: 200b0253
It seems to be caused by the corrupted or wrong CPSR restored on return
from exception. NuttX restores the context using code like this:
msr spsr, r1
GCC translates this to:
msr spsr_fc, r1
As a result, not all SPSR fields are updated on exception return. This
should be:
msr spsr_fsxc, r1
On some evaluation boards, spsr_svc may have totally invalid value at
power-on-reset. As it is not initialized at boot, the code above may
result in the corruption of cpsr and thus unexpected behavior.
Reported-by: Eunbong Song <eunb.song@samsung.com>
Signed-off-by: Heesub Shin <heesub.shin@samsung.com>
2016-11-06 20:48:09 +09:00
Heesub Shin
6bfc6b4d23
ARMv7-R: fix typo in mpu support
...
s/ARMV7M/ARMV7R/g
Reported-by: Eunbong Song <eunb.song@samsung.com>
Signed-off-by: Heesub Shin <heesub.shin@samsung.com>
2016-11-06 20:48:09 +09:00