1. Change pci uio ivshmem driver from pci bus based tp pci-ivshmem
bus based;
2. Add the interrupt support by usin the pci_ivshmem API;
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
This commit fixed the issue where the hardware timer wraps around and causes the system to halt.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
reason:
1 On different architectures, we can utilize more optimized strategies
to implement up_current_regs/up_set_current_regs.
eg. use interrupt registersor percpu registers.
code size
before
text data bss dec hex filename
262848 49985 63893 376726 5bf96 nuttx
after
text data bss dec hex filename
262844 49985 63893 376722 5bf92 nuttx
size change -4
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Intel CET (Control-flow Enforcement Technology) is a hardware enhancement aimed at mitigating the Retpoline vulnerability, but it may impact CPU branch prediction performance. This commit added ARCH_INTEL64_DISABLE_CET, which can disable CET completely with compilation option `-fcf-protection=none`.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
It was discovered that attempting to load x86-64 format ELF files with a multiboot1 header using the qemu `-kernel` command would result in an error, as multiboot1 only allows x86-32 format ELF files. To address this limitation, we have developed a simple x86_32 bootloader. This bootloader is designed to copy the `nuttx.bin` file to the designated memory address (`0x100000`) and then transfer control to NuttX by executing a jump instruction (`jmp 0x100000`).
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
These are changes to make HPET work with ACRN hypervisor:
- FSB interrupt delivery (which works like PCI MSI)
- 32-bit mode support
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
This PR modifies NuttX CI and GitHub Actions, to comply with ASF Policy. Right now, every NuttX Pull Request will trigger 24 Concurrent Jobs (GitHub Runners), executing them in parallel: https://lupyuen.github.io/articles/ci
According to ASF Policy: We should run at most 15 Concurrent Jobs: https://infra.apache.org/github-actions-policy.html
Thus we'll cut down the Concurrent Jobs from 24 down to 15. That's 12 Linux Jobs, 2 macOS, 1 Windows. (Each job takes 30 mins to 2 hours)
(1) Right now our "Linux > Strategy" is a flat list of 20 Linux Jobs, all executed in parallel
(2) We change "Linux > Strategy" to prioritise by Target Architecture, and limit to 12 concurrent jobs
(3) So NuttX CI will initially execute 12 Build Jobs across Arm32, Arm64, RISC-V, Simulator and Xtensa. As they complete, NuttX CI will execute the remaining 8 Build Jobs (for Arm32).
(4) This will extend the Overall Build Duration from [2 hours](https://github.com/apache/nuttx/actions/runs/10817443237) to [2.25 hours](https://github.com/lupyuen4/ci-nuttx/actions/runs/10828246630)
(5) We'll also limit macOS Jobs to 2, Windows Jobs to 1
Some devices need to clear the fb panbuf when waking up from sleep
to avoid outputting residual buffers from before sleeping
Signed-off-by: rongyichang <rongyichang@xiaomi.com>
IOB buffer participates in the calculation of the congestion strategy
in the protocol stack, if the iob buffer is exhausted or there are
too many syslog printing tasks, the behavior of the protocol stack
and log printing will unable to determined, this PR will remove support
for iob buffer in syslog
Signed-off-by: chao an <anchao@lixiang.com>
According to the mmap(2) specification, anonymous pages should be initialized to zero unless the MAP_UNINITIALIZED is specified.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
This commit add MADV_HUGEPAGE and MADV_NOHUGEPAGE definitions for madvise. Notice that none of these flags have been implemented yet.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
coresight_claim_device will fail when unregister device
which has been enabled. device should be the init state when
it is unregistered.
Signed-off-by: liaoao <liaoao@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
TX clock or ref clock can be driven either from outside (PHY / oscilator) or by the ENET block.
Typical connection with RMII PHY is that the PHY drives the refclk.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
New configuration IMX9_HAVE_ATF_FIRMWARE introduced,
it is default on and it selects ARM64_HAVE_PSCI, when compiling
bootloader or when using bootloader that does not have atf
this shall be disabled
Signed-off-by: Jouni Ukkonen <jouni.ukkonen@unikie.com>
Using the HLT instruction in VM usually traps into the Hypervisor and releases CPU control. This will result in real-time performance degradation. Using the NOP or MWAIT instruction for an IDLE loop can reduce energy consumption while not trapping into the Hypervisor.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Clean up the interrupt-driven logic in the driver; handle error cases properly,
remove dead code and simplify logic.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
