Commit Graph

477 Commits

Author SHA1 Message Date
Gregory Nutt
9c9fc13b6c MIPS: Add some build support for the M14K and also for the PIC32MZ Starter Kit. Still a long way to go 2015-02-22 13:45:59 -06:00
Gregory Nutt
a81ebff6e0 Remove support for obsolete PIC32 toolchain configuration names 2015-02-22 12:14:20 -06:00
Gregory Nutt
024a5cb278 PIC32MZ: Add just enough PIC32MZ logic that we can run 'make menuconfig' 2015-02-22 10:53:24 -06:00
Gregory Nutt
f273bcfa82 Fix a typo that prevents building PIC32... How long has that been there? 2015-02-21 19:41:59 -06:00
Gregory Nutt
c5b3e3e7aa Current Pinguino toolchain uses prefix p32 instead of mips 2015-02-21 19:41:26 -06:00
Gregory Nutt
8bac6b71ce SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville. 2015-02-08 06:53:24 -06:00
Gregory Nutt
30b141e2c8 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
9588b0e7a7 All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called 2015-01-21 11:36:33 -06:00
Gregory Nutt
723b7fc430 Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address. 2015-01-20 15:52:25 -06:00
Gregory Nutt
f6063c3896 Networking: Add missing raw/packet socket support to all Ethernet drivers 2015-01-20 15:14:29 -06:00
Gregory Nutt
07132f462f Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly. 2015-01-20 06:26:14 -06:00
Gregory Nutt
ac69e11a5f Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received 2015-01-15 09:31:23 -06:00
Gregory Nutt
836a8b1625 - Rename devif_input() ipv4_input()
- Copy net/devif/devif_input.c to ipv6_input.c.  Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c.  Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
2015-01-15 08:03:56 -06:00
Gregory Nutt
6bc54c3541 Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers 2015-01-15 07:07:39 -06:00
Gregory Nutt
2330c9c842 Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers 2014-11-16 08:10:06 -06:00
Gregory Nutt
bf984b2b3a Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
60d2547cd7 Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS 2014-10-27 11:31:16 -06:00
Gregory Nutt
4b4f3212f3 For PIC32MX7, DEVCFG0 bit 2 must be set 2014-10-09 14:03:54 -06:00
Gregory Nutt
db9901e2f9 Update everything under nuttx/arch to use the corrected syslog interfaces 2014-10-08 12:48:47 -06:00
Gregory Nutt
3dd3b1f5e2 The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object 2014-09-04 13:31:34 -06:00
Gregory Nutt
31b8137956 There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing. 2014-09-01 15:39:34 -06:00
Gregory Nutt
ec086adfae Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
10ca085b09 Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
fcd7b9336e Rename kfree to kmm_free for consistency with other naming conventions 2014-08-31 17:04:02 -06:00
Gregory Nutt
bcb5a5316e Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming 2014-08-31 16:24:24 -06:00
Gregory Nutt
e11679acf8 Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
35b11a7533 Fix an error introduced into ALL implmentations of interrupt dispatch logic 2014-08-28 08:41:57 -06:00
Gregory Nutt
8bdde7b2d1 Add address environment support to ALL implementatins of up_release_pending() 2014-08-28 08:10:19 -06:00
Gregory Nutt
1b24afe6fc Add address environment support to ALL implementatins of up_reprioritize_rtr() 2014-08-28 07:54:07 -06:00
Gregory Nutt
9c6fea03d0 MIPS: Move address environment switch from the task switchers to the interrupt handler. That may save doing the action multiple times per interrupt 2014-08-28 07:16:14 -06:00
Gregory Nutt
756054d745 Add ADDRENV support to ALL implmentations of _exit() 2014-08-27 16:31:02 -06:00
Gregory Nutt
7055bce8b4 Add ADDRENV support to ALL implementations of up_unblock_task() 2014-08-27 16:15:46 -06:00
Gregory Nutt
5bf114e604 Add ADDRENV support to all implementations of up_block_task() 2014-08-27 15:36:52 -06:00
Gregory Nutt
2bc16b2ba5 wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
Gregory Nutt
6455f60c60 Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures 2014-08-08 18:39:28 -06:00
Gregory Nutt
4dc151097e Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h 2014-08-08 17:53:55 -06:00
Gregory Nutt
c98ece6bec Move task control files from sched/ to sched/task 2014-08-08 16:44:08 -06:00
Gregory Nutt
1c99d53bb1 Move clock functions from sched/ to sched/clock 2014-08-08 14:43:02 -06:00
Gregory Nutt
39183d37b8 Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors 2014-08-07 18:00:38 -06:00
Gregory Nutt
594083d870 Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined. 2014-08-06 16:26:01 -06:00
Gregory Nutt
d7fe256821 NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
99ce3a44d7 Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
11e3a21411 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
313982ba18 NET: Rename XYZ_uiptxpoll to just XYZ_txpoll 2014-07-01 18:41:08 -06:00
Gregory Nutt
621ec21bfd Rename uip_poll->devif_poll and uip_timer->devif_timer 2014-06-30 18:40:41 -06:00
Gregory Nutt
ade8807a61 Rename uip_input to devif_input 2014-06-30 18:11:17 -06:00
Gregory Nutt
e4990dda4d Rename uip_driver_s net_driver_s 2014-06-27 16:48:12 -06:00
Gregory Nutt
57383ea2f3 Rename ip_eth_hdr to eth_hdr_s 2014-06-25 09:57:52 -06:00
Gregory Nutt
11896e1481 Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h 2014-06-24 10:14:15 -06:00
Gregory Nutt
b34a1f1e01 Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h 2014-06-24 09:28:44 -06:00
Gregory Nutt
00667926a9 Move include/nuttx/net/uipopt.h to include/nuttx/net/netconfig.h 2014-06-24 08:53:28 -06:00
Gregory Nutt
407e72b300 Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_ 2014-05-30 12:13:06 -06:00
Gregory Nutt
8dbc4714c5 Change all variadic macros to C99 style 2014-05-22 09:01:51 -06:00
Gregory Nutt
bac1ab9a34 Make sure that all references to up_prioritize_irq() are conditioned on CONFIG_ARCH_IRQPRIO. Noted by Make Smith 2014-05-20 17:48:39 -06:00
Gregory Nutt
af2bb81ac2 Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:00:33 -06:00
Gregory Nutt
ae82fa65a6 Fix spelling, only one t in exiting 2014-04-27 15:49:38 -06:00
Gregory Nutt
25d4ff745b More trailing whilespace removal 2014-04-13 16:22:22 -06:00
Gregory Nutt
c708eff608 Make sure that there is one space after for 2014-04-12 13:28:22 -06:00
Gregory Nutt
33d5d24964 Make sure that there is one space between while and condition 2014-04-12 13:09:48 -06:00
Gregory Nutt
66df3afd46 mv ramlog.h and syslog.h to new include/nuttx/syslog 2014-04-10 09:29:30 -06:00
Gregory Nutt
5b9f1f54c2 Add option to dump buffered USB trace data on an assertion 2014-03-20 10:56:30 -06:00
Gregory Nutt
07454e9241 configs/pic32-starterkit/nsh converted to use the kconfig-frontends tools 2014-03-01 11:10:30 -06:00
Gregory Nutt
74c50c12de configs/mirtoo/nsh converted to use the kconfig-frontends tools 2014-03-01 10:49:19 -06:00
Gregory Nutt
a26b03d0d0 rename up_led*() functions to board_led_*() 2014-01-24 14:28:49 -06:00
Gregory Nutt
231889c888 The optimization level can now be selected as part of the configuration 2014-01-24 07:45:35 -06:00
Gregory Nutt
f53f269a84 Kconfigs: Interrupt prioritization should not be automatically selected 2013-12-20 08:42:54 -06:00
Gregory Nutt
d01808c603 LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks 2013-12-05 10:37:55 -06:00
Gregory Nutt
b8085906b9 Extend stack debug logic to include IDLE and interrupt stacks. Also color the heap as well. Based on suggestions from David Sidrane 2013-11-01 11:16:51 -06:00
Gregory Nutt
4aaee6fb3c Clean up some naming: fd vs. fildes vs. filedes and filep vs filp 2013-09-28 16:50:07 -06:00
Gregory Nutt
52b0a16cd3 Move CONFIG_NET_DUMPPACKET from LPC17 and STM32 to commong network drivers. Automatically enabled CONFIG_NETDEVICES when any Ethernet driver is enabled 2013-09-25 11:50:05 -06:00
Gregory Nutt
82cd614b66 Add prefex ETH0 to all PHY configurations to support multiple NICs 2013-09-17 10:45:07 -06:00
Gregory Nutt
56f9092a87 Fix all occurrences of "the the" in documentation and comments 2013-08-27 09:40:19 -06:00
Gregory Nutt
dfe6452b8e Add untested OHCI driver for the SAMA5; structure naming and header files for USB host initialization prototypes 2013-08-11 17:11:32 -06:00
Gregory Nutt
2f772c84fd Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_ 2013-07-26 10:09:17 -06:00
Gregory Nutt
a954eb76b2 Created new directories to hold SPI-related files 2013-07-01 08:11:54 -06:00
Gregory Nutt
8ff1402958 .dSYM only needs to be in the same .gitignore files as .exe 2013-05-30 15:02:04 -06:00
Gregory Nutt
f0c36e422f Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files 2013-05-30 14:45:31 -06:00
Gregory Nutt
34c9e7284b Fix null packet handling in the PIC32 USB device driver. This is a critical bug fix for PIC32. Add support for the USB monitor to the Sure-PIC32MX configuration 2013-05-28 13:36:01 -06:00
Gregory Nutt
03478d02aa Fix Sure PIC32 LOOPSPERMSEC 2013-05-27 16:29:41 -06:00
Gregory Nutt
f7ef927019 Converted all configurations to use the kconfig-frontends tools, cleaned up the directory structure and naming to match some of the more recent configurations, and added a segment LCD driver for the board. The initial checkin of the LCD driver is just a clone of configs/pcblogic-pic32mx/src/pic32mx_lcd1602 and it not yet expected to be functional. 2013-05-26 16:44:53 -06:00
Gregory Nutt
3aa94411be Remove up_assert_code 2013-04-25 15:19:59 -06:00
Gregory Nutt
91e6580aff Adding missing registration of /dev/zero; Condition registration of /dev/null. From Ken Petit 2013-04-24 07:17:49 -06:00
Gregory Nutt
803a860d34 New Kconfig convention: Extra indentation in comments will render as HTML preformatted text 2013-04-22 09:10:58 -06:00
Gregory Nutt
65fec0683a _exit() should not call atexit() or on_exit() functions; Rename task_deletecurrent() to task_exit() 2013-04-18 16:15:20 -06:00
Gregory Nutt
1a07e950ea Move LPC17xx IOCON register definitions from lpc17_gpio.h to lpc17_iocon.h; fix a few more .gitignore files 2013-04-04 18:12:44 -06:00
Gregory Nutt
1694955188 Clone svn:ignore directory atributed to .gitignore files 2013-04-04 14:27:29 -06:00
patacongo
e29d6479c9 Corrections needed after further test of stack-based task arguments
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5771 42af7a65-404d-4744-a932-0658087f49c3
2013-03-21 23:37:11 +00:00
patacongo
c496b7aad9 Copy siginfo_t to step before calling a user-space signal handler
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5769 42af7a65-404d-4744-a932-0658087f49c3
2013-03-21 20:02:14 +00:00
patacongo
a7b37da2d9 Add a up_stack_frame() interface to allocate a frame of data on a task's stack.
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5768 42af7a65-404d-4744-a932-0658087f49c3
2013-03-21 17:35:08 +00:00
patacongo
c86f502f2e In the kernel build, allocate the stacks for kernel threads from the kernel heap so that they are protected from medddling by the applications
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5766 42af7a65-404d-4744-a932-0658087f49c3
2013-03-20 20:27:08 +00:00
patacongo
020cc2248e Change prototypes of up_create_stack and up_release_stack to include a task type parameter
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5765 42af7a65-404d-4744-a932-0658087f49c3
2013-03-20 18:22:21 +00:00
patacongo
990c1febf8 Add support for nested system calls
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5752 42af7a65-404d-4744-a932-0658087f49c3
2013-03-17 16:13:28 +00:00
patacongo
d455b94545 Fix more compile errors and warnings introduced in recent commits
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5744 42af7a65-404d-4744-a932-0658087f49c3
2013-03-15 01:32:47 +00:00
patacongo
c85fcaecdb Rename g_heapbase to g_idle_topstack; Fix kernel build heap allocation which cannot use g_heapbase
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5739 42af7a65-404d-4744-a932-0658087f49c3
2013-03-14 14:42:52 +00:00
patacongo
8159804f9c Fix some ARMv7-M syscall logic
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5736 42af7a65-404d-4744-a932-0658087f49c3
2013-03-12 21:53:18 +00:00
patacongo
3dc5b1fa9f Create sched_ufree and sched_kfree from sched_free; Use user-accessible heap to allocae stacks
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5725 42af7a65-404d-4744-a932-0658087f49c3
2013-03-10 15:32:33 +00:00
patacongo
e47c64204c More changes for a kernel-mode allocator (more to be done)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5724 42af7a65-404d-4744-a932-0658087f49c3
2013-03-09 21:12:20 +00:00
patacongo
edeb45f8c5 More kernel build fixes
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5716 42af7a65-404d-4744-a932-0658087f49c3
2013-03-07 14:27:47 +00:00
patacongo
bd1488bdab Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build.
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 19:56:32 +00:00
patacongo
33a78ff078 Fix for compilation issues reported by Mike Smith
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5702 42af7a65-404d-4744-a932-0658087f49c3
2013-03-04 00:00:19 +00:00
patacongo
9207732f18 Add debug output when memory allocations fail
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5686 42af7a65-404d-4744-a932-0658087f49c3
2013-02-28 15:31:58 +00:00
patacongo
f84c45c220 Some NuTiny-SDK-NUC120 size reduction; All serial driver vtables should be static const
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5683 42af7a65-404d-4744-a932-0658087f49c3
2013-02-27 22:24:49 +00:00
patacongo
f7833e1c8e MIPS stack alignment fix for floating point from Helmut
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5681 42af7a65-404d-4744-a932-0658087f49c3
2013-02-27 16:31:03 +00:00
patacongo
c254d0bb3e Add an NSH configuration for the NuTiny-SDK-NUC120. Still does not work
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5678 42af7a65-404d-4744-a932-0658087f49c3
2013-02-26 21:53:12 +00:00
patacongo
fd9eac63a9 Some fixes needed for STM32 build after recent scheduler changes
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5620 42af7a65-404d-4744-a932-0658087f49c3
2013-02-07 16:58:43 +00:00
patacongo
bc69dc2c5a Rename _TCB to struct tcb_s
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5610 42af7a65-404d-4744-a932-0658087f49c3
2013-02-04 18:46:28 +00:00
patacongo
b27ce2030e Misc clean; mark assertions as non-returning; allow toolchain prefix to be overriden from make command line
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5591 42af7a65-404d-4744-a932-0658087f49c3
2013-01-31 23:29:34 +00:00
patacongo
cec4563394 Missing calls to class SUSPEND/RESUME methods in all USB drivers
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5590 42af7a65-404d-4744-a932-0658087f49c3
2013-01-31 19:20:26 +00:00
patacongo
b1aa82fcca Add syslog.h; rename lib_rawprintf() to syslog()
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5578 42af7a65-404d-4744-a932-0658087f49c3
2013-01-28 21:55:16 +00:00
patacongo
1b8979d24f Serial driver needed even when no console; Fix user LED settings in all STM32 configurations
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5575 42af7a65-404d-4744-a932-0658087f49c3
2013-01-28 15:03:17 +00:00
patacongo
6cfe0a45e9 Move stream data from TCB to task group structure.
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5569 42af7a65-404d-4744-a932-0658087f49c3
2013-01-26 22:25:21 +00:00
patacongo
43659b5840 Move file data from TCB to task group
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5567 42af7a65-404d-4744-a932-0658087f49c3
2013-01-26 20:17:29 +00:00
patacongo
71a8d7d104 Fix poll/select issue reported by Qiang
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5559 42af7a65-404d-4744-a932-0658087f49c3
2013-01-24 19:19:38 +00:00
patacongo
65a1c61e6c Beginning of support for LCD1602
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5545 42af7a65-404d-4744-a932-0658087f49c3
2013-01-21 22:46:37 +00:00
patacongo
ee2be652aa Implement vfork() for the MIPS32 architecture
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5520 42af7a65-404d-4744-a932-0658087f49c3
2013-01-15 15:40:18 +00:00
patacongo
74a42b5f39 Configre configs/ubw32/ostest to use kconfig-frontends
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5518 42af7a65-404d-4744-a932-0658087f49c3
2013-01-14 22:06:19 +00:00
patacongo
1a4baed866 Mostly costmetic updates
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5452 42af7a65-404d-4744-a932-0658087f49c3
2012-12-23 17:32:41 +00:00
patacongo
cd20adb63d Patches from Petteri Aimonen + stdbool and rand() changes for Freddie Chopin
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5415 42af7a65-404d-4744-a932-0658087f49c3
2012-12-07 16:00:56 +00:00
patacongo
9b1ea99dec All ZNEO configurations converted to use the mconf/Kconfig tool
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5401 42af7a65-404d-4744-a932-0658087f49c3
2012-11-29 18:44:02 +00:00
patacongo
f99e55676b Add common Toolchain.defs for AVR/AVR32; Add Toolchain.defs for ARM; Add more toolchain options (from Mike); incdir.sh and .bat now take -s option
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5384 42af7a65-404d-4744-a932-0658087f49c3
2012-11-23 14:13:57 +00:00
patacongo
04dbba6227 /configs/stm32f4discovery/winbuild and configs/cloudctrl upated to use Mike's Toolchain.defs; Fix error introduced into tools/configure.sh
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5380 42af7a65-404d-4744-a932-0658087f49c3
2012-11-21 19:54:44 +00:00
patacongo
74949ee01d Big refactoring of toolchain definitions by Mike Smith
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5379 42af7a65-404d-4744-a932-0658087f49c3
2012-11-21 18:34:10 +00:00
patacongo
00d2b645e6 Missing comma in EVERY DELFILE/DELDIR macro call in every Makefile
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5373 42af7a65-404d-4744-a932-0658087f49c3
2012-11-20 15:47:41 +00:00
patacongo
756e84977b Most of the changes needed to support Windows native clean; distclean is has a problem
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5367 42af7a65-404d-4744-a932-0658087f49c3
2012-11-17 18:54:53 +00:00
patacongo
7163ac74fa Move some (hopefully) un-necessary quotes in Makefiles for Mike
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5356 42af7a65-404d-4744-a932-0658087f49c3
2012-11-15 17:43:29 +00:00
patacongo
856f320736 Simple window natives OS test build now works; Probabaly more to do for other configs; clean targets still have problems
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5355 42af7a65-404d-4744-a932-0658087f49c3
2012-11-14 20:59:36 +00:00
patacongo
0a8e570a3b More native build fixes -- still problems in apps/ directory
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5352 42af7a65-404d-4744-a932-0658087f49c3
2012-11-14 15:55:07 +00:00
patacongo
fbdc3246fd A few more build fixes
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5340 42af7a65-404d-4744-a932-0658087f49c3
2012-11-12 01:54:54 +00:00
patacongo
bf8f1e986c Correct some issues with last check-in; ez80 still does not build
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5339 42af7a65-404d-4744-a932-0658087f49c3
2012-11-11 23:44:31 +00:00
patacongo
fac751de6b Partial change: Removing bash ARCHIVE loop
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5335 42af7a65-404d-4744-a932-0658087f49c3
2012-11-11 15:42:12 +00:00
patacongo
31fcfae567 Remove bash fragments that test for board/Makefile
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5334 42af7a65-404d-4744-a932-0658087f49c3
2012-11-11 14:36:01 +00:00
patacongo
9b822f3086 arch/../src/Makefiles now use only libraries in lib/
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5333 42af7a65-404d-4744-a932-0658087f49c3
2012-11-11 13:52:31 +00:00
patacongo
51793af904 Change = to += in setting of LDFLAGS in all architecture Makefiles
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5311 42af7a65-404d-4744-a932-0658087f49c3
2012-11-04 21:04:30 +00:00
patacongo
5acf2fe3e1 Resync new repository with old repo r5166
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5154 42af7a65-404d-4744-a932-0658087f49c3
2012-09-17 18:35:37 +00:00
patacongo
36df84c843 Email address change in nuttx/
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5145 42af7a65-404d-4744-a932-0658087f49c3
2012-09-13 18:32:24 +00:00
patacongo
267eb76ea9 The M3 Wildfire port is code complete and ready for test
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5125 42af7a65-404d-4744-a932-0658087f49c3
2012-09-10 22:26:37 +00:00
patacongo
4f469e6316 Reconfigured Shenzhou to use JTAG. Misc Kconfig changes
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5118 42af7a65-404d-4744-a932-0658087f49c3
2012-09-09 15:43:18 +00:00
patacongo
767934d4f5 Shenzhou board is first to use ONLY Kconfig for configuration
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5114 42af7a65-404d-4744-a932-0658087f49c3
2012-09-08 13:56:21 +00:00
patacongo
06edc9b16b Kconfig: Standardize board LED and button configurations
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5112 42af7a65-404d-4744-a932-0658087f49c3
2012-09-08 03:31:46 +00:00
patacongo
0f4f0d72af LPC17xx Kconfig looks good
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5099 42af7a65-404d-4744-a932-0658087f49c3
2012-09-05 21:36:03 +00:00
patacongo
bd9b0f2d4f Add Kconfig settings for the LPC17xx
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5094 42af7a65-404d-4744-a932-0658087f49c3
2012-09-05 17:20:19 +00:00
patacongo
48362edbb5 Refactor serial configuratin; AVR teensy Kconfig now builds
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5092 42af7a65-404d-4744-a932-0658087f49c3
2012-09-05 12:45:35 +00:00
patacongo
dbaa35bf9c Kconfig changes + back out part of last check-in: The 2STOP setting must be integer 0/1, not boolean
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5086 42af7a65-404d-4744-a932-0658087f49c3
2012-09-04 15:28:56 +00:00
patacongo
95ec4c3991 Auto-configuration updates from Richard Cochran
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5032 42af7a65-404d-4744-a932-0658087f49c3
2012-08-17 14:07:48 +00:00
patacongo
40888af331 Move RAMLOG driver to drivers/syslog; Add ability to output debug information to any character device or file
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4996 42af7a65-404d-4744-a932-0658087f49c3
2012-08-02 00:42:46 +00:00
patacongo
e6970f04e6 Add support for PIC32MX1/2 ANSEL register; Mirtoo NXFFS configuration now uses the Pinquino toolchain by default:
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4984 42af7a65-404d-4744-a932-0658087f49c3
2012-07-27 17:25:35 +00:00
patacongo
de34678cb0 Combine cfset[o|i]speed to cfsetspeed; combine cfget[o|i]speed for cfgetspeed
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4975 42af7a65-404d-4744-a932-0658087f49c3
2012-07-24 22:56:36 +00:00
patacongo
f061660d50 Ooops.. c_speed is now read-only
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4974 42af7a65-404d-4744-a932-0658087f49c3
2012-07-24 17:16:25 +00:00
patacongo
28bd2e6071 Baud definitions (B9600 for example) are again encoded; Now supports the BOTHER settings which allows specifying the baud via c_ispeed and c_ospeed termios fields
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4970 42af7a65-404d-4744-a932-0658087f49c3
2012-07-23 15:37:13 +00:00
patacongo
faf4bad3f1 Change all values in all limits.h for all architectures to signed decimal; the hex values were not sign extending appropriate in most uses
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4911 42af7a65-404d-4744-a932-0658087f49c3
2012-07-05 23:45:57 +00:00
patacongo
4ca2862016 Fix a critical PIC32 GPIO configuration bug
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4867 42af7a65-404d-4744-a932-0658087f49c3
2012-06-25 15:24:52 +00:00
patacongo
8d06757bc4 Enable LEDs on Mirtoo board
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4863 42af7a65-404d-4744-a932-0658087f49c3
2012-06-22 18:35:25 +00:00
patacongo
c3316872c5 Mirtoo update
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4860 42af7a65-404d-4744-a932-0658087f49c3
2012-06-21 20:44:55 +00:00
patacongo
22b8a95b2b Minor updates to PIC32 configuration and to documentation
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4858 42af7a65-404d-4744-a932-0658087f49c3
2012-06-21 00:05:20 +00:00
patacongo
a13efa2e7e More updates for PIC32 MX1/2 device configuration bits
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4857 42af7a65-404d-4744-a932-0658087f49c3
2012-06-20 22:29:32 +00:00
patacongo
d227c86a14 Updates to support the Mirtoo internal clocking
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4855 42af7a65-404d-4744-a932-0658087f49c3
2012-06-20 19:29:20 +00:00
patacongo
f17fd97fd2 PIC32MX1/2 pin selection logic; Mirtoo LEDs, SPI2, and UART2 configuration
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4853 42af7a65-404d-4744-a932-0658087f49c3
2012-06-20 17:37:20 +00:00
patacongo
55f328c91a Add a configuration to support the Mirtoo module
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4852 42af7a65-404d-4744-a932-0658087f49c3
2012-06-20 00:04:56 +00:00
patacongo
469d018967 Add support for PIC32 MX1 and MX2 families
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4851 42af7a65-404d-4744-a932-0658087f49c3
2012-06-19 19:09:14 +00:00
patacongo
7ecafdd6e4 Fix a bad interrupt state in the PIC32 IDLE loop when the work queue is enabled
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4805 42af7a65-404d-4744-a932-0658087f49c3
2012-06-06 01:44:57 +00:00
patacongo
1242e0227e Add an ADC-based touchscreen driver for the PIC32MX7 MMB board
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4804 42af7a65-404d-4744-a932-0658087f49c3
2012-06-05 19:45:01 +00:00
patacongo
ecdb40a0ec The PIC32MX7 MMB's mio832qt2 LCD is functional
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4803 42af7a65-404d-4744-a932-0658087f49c3
2012-06-04 20:36:18 +00:00
patacongo
3793169301 Add support for the MIO283QT2 LCD
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4802 42af7a65-404d-4744-a932-0658087f49c3
2012-06-04 18:45:48 +00:00
patacongo
d5261c997a SD card now works on the PIC32MX7 MMB board
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4799 42af7a65-404d-4744-a932-0658087f49c3
2012-06-03 16:09:59 +00:00
patacongo
150b5d3a48 Add SD card support to the PIC32MX7 MMB board; Add regiser level debug instrumentatin for the PIC32 SPI driver
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4797 42af7a65-404d-4744-a932-0658087f49c3
2012-06-02 17:57:39 +00:00
patacongo
c6788bd806 Fix PHY address search; NFS update
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4796 42af7a65-404d-4744-a932-0658087f49c3
2012-06-01 23:12:17 +00:00
patacongo
4ee1cd036b Fix device configuration... now Mikroelektronika PIC32MX7 MMB board works.
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4794 42af7a65-404d-4744-a932-0658087f49c3
2012-06-01 19:07:17 +00:00
patacongo
a74f601c6c Add circular DMA support to STM32 and STM32 serial driver; Add initial configuration for the Mikroelektronika PIC32MX7 MMB board
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4640 42af7a65-404d-4744-a932-0658087f49c3
2012-04-22 19:50:33 +00:00
patacongo
868fc6e118 More Kconfig stuff
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4636 42af7a65-404d-4744-a932-0658087f49c3
2012-04-19 22:51:42 +00:00
patacongo
5804060da5 More Kconfig stuff
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4628 42af7a65-404d-4744-a932-0658087f49c3
2012-04-17 22:54:31 +00:00
patacongo
f566645ab9 More Kconfig files
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4624 42af7a65-404d-4744-a932-0658087f49c3
2012-04-17 13:48:39 +00:00
patacongo
53ab05dce6 Extend the USB device/class interface: Add parameters to pass the EP0 OUT data that should accompany the OUT SETUP request
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4595 42af7a65-404d-4744-a932-0658087f49c3
2012-04-12 16:30:48 +00:00
patacongo
8948524fd3 Include libgcc.a inside of the group of recursively linked libraries in all Makefiles
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4573 42af7a65-404d-4744-a932-0658087f49c3
2012-04-08 13:03:26 +00:00
patacongo
3635befa76 Add kconfig documentation
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4567 42af7a65-404d-4744-a932-0658087f49c3
2012-04-06 16:45:52 +00:00
patacongo
d79a3b09f4 Adding skeleton Kconfig files (part 1 of 2)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4564 42af7a65-404d-4744-a932-0658087f49c3
2012-04-06 15:49:35 +00:00
patacongo
b365ff099e Change STM32 so that stm32_pmstop.c and stm32_pmstandby are built even if CONFIG_PM is not defined
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4502 42af7a65-404d-4744-a932-0658087f49c3
2012-03-22 14:07:45 +00:00
patacongo
b4852fca75 Move serial header files to include/nuttx/serial
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4500 42af7a65-404d-4744-a932-0658087f49c3
2012-03-21 19:47:23 +00:00
patacongo
bab4616a8d Move file-system header files to include/nuttx/fs
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4499 42af7a65-404d-4744-a932-0658087f49c3
2012-03-21 18:01:07 +00:00
patacongo
e24ae5a449 Cosmetic PIC32 USB driver fixes (still has problems)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4498 42af7a65-404d-4744-a932-0658087f49c3
2012-03-20 15:28:06 +00:00
patacongo
3495362c3a Minor updates for PIC32 USB device driver bugs
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4497 42af7a65-404d-4744-a932-0658087f49c3
2012-03-19 17:56:15 +00:00
patacongo
5f3ebe5aff The PIC32 USB driver (finally) works the the Mass Storage Class
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4496 42af7a65-404d-4744-a932-0658087f49c3
2012-03-18 20:39:18 +00:00
patacongo
cbdff7826d Fix reported USB MSC product/revision
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4495 42af7a65-404d-4744-a932-0658087f49c3
2012-03-17 17:15:59 +00:00
patacongo
e74e3c7195 Updates to the PIC32 USB driver (still kind of buggy); Fix for STM32 CAN2 -- Need to enable CAN1 clocking to use CAN2
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4493 42af7a65-404d-4744-a932-0658087f49c3
2012-03-16 20:59:21 +00:00
patacongo
ea932c224a Fix PIC32 USB double buffer toggle
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4492 42af7a65-404d-4744-a932-0658087f49c3
2012-03-15 22:56:46 +00:00
patacongo
68a84f92b3 Updates to PIC32 USB stall logic -- still doesn't work right
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4491 42af7a65-404d-4744-a932-0658087f49c3
2012-03-15 20:53:42 +00:00
patacongo
576859ab6d Add a PIC32 configuration that supports only a Telnet console
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4486 42af7a65-404d-4744-a932-0658087f49c3
2012-03-13 19:21:04 +00:00
patacongo
d7d56571e7 PIC32 Ethernet driver now appears stable
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4485 42af7a65-404d-4744-a932-0658087f49c3
2012-03-13 18:05:49 +00:00
patacongo
e1d5539778 Correct PIC32 Ethernet Tx ring handling
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4484 42af7a65-404d-4744-a932-0658087f49c3
2012-03-13 16:15:24 +00:00
patacongo
66728e47fa Update PIC32 Ethernet driver
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4469 42af7a65-404d-4744-a932-0658087f49c3
2012-03-09 22:05:14 +00:00
patacongo
42be230532 Fix several bugs related to PIC32 Ethernet driver
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4468 42af7a65-404d-4744-a932-0658087f49c3
2012-03-09 17:47:25 +00:00
patacongo
77f0270dea PIC32 Ethernet driver now at least talks to the PHY
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4467 42af7a65-404d-4744-a932-0658087f49c3
2012-03-09 14:47:27 +00:00
patacongo
9ef5b06463 Update PIC32 Ethernet driver from debugging (still does not work
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4465 42af7a65-404d-4744-a932-0658087f49c3
2012-03-08 23:05:03 +00:00
patacongo
ddc72c7834 Verified USB (device) on the PIC32 Ethernet Starter Kit
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4464 42af7a65-404d-4744-a932-0658087f49c3
2012-03-08 14:31:49 +00:00
patacongo
b9757f594d Updates to PIC32 SPI driver
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4461 42af7a65-404d-4744-a932-0658087f49c3
2012-03-07 17:40:23 +00:00
patacongo
1e4fe73e6b Add PIC32 SPI driver
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4459 42af7a65-404d-4744-a932-0658087f49c3
2012-03-07 00:53:50 +00:00
patacongo
ee1ff18a26 Add support for use of a USB serial device to provide NSH console I/O. Verified on the Sure PIPIC32MX board
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4458 42af7a65-404d-4744-a932-0658087f49c3
2012-03-06 20:21:57 +00:00
patacongo
2e0bf2907e The PIC32 USB device driver is (finally) functional
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4457 42af7a65-404d-4744-a932-0658087f49c3
2012-03-06 15:51:03 +00:00
patacongo
f9e5a84677 Minor update to PIC32 USB device driver
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4455 42af7a65-404d-4744-a932-0658087f49c3
2012-03-05 23:04:18 +00:00
patacongo
083a6df521 Some improvements in PIC32 USB BDT handling
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4454 42af7a65-404d-4744-a932-0658087f49c3
2012-03-05 21:02:07 +00:00
patacongo
12c26e978f Fix some PIC32 USB IN transfer issues -- still more
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4453 42af7a65-404d-4744-a932-0658087f49c3
2012-03-04 22:31:18 +00:00