Gregory Nutt
de6b13b3ab
Per OpenGroup.org, syslog -- and, hence, nonstandard vsyslog, and debug wrappers -- does not return a value. Rename _vsyslog to nx_vsyslog. Use internal nx_vsyslog in the few cases where a return value is required.
2018-03-04 08:07:07 -06:00
Gregory Nutt
7cf88d7dbd
Make sure that labeling is used consistently in all function headers.
2018-02-01 10:00:02 -06:00
Gregory Nutt
a8b6be4aaf
The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.
2018-01-22 08:17:45 -06:00
Gregory Nutt
1c5ec07414
arch/: Remove dangling space at the end of lines.
2017-06-28 13:16:48 -06:00
Gregory Nutt
f5f1c73b54
Based on the last PR, review all serial driver vector attachment. Found one additional error and updated all relevant drivers to current interrupt parameter passing.
2017-06-12 06:22:35 -06:00
Gregory Nutt
7fe112fe4c
Kconfig/deconfigs: Add CONFIG_ARCH_TOOLCHAIN_GNU to indicate that the toolchain is based on GNU gcc/as/ld. This is in addition to the CPU-specific versions of the same definition.
2017-05-13 11:44:12 -06:00
Gregory Nutt
0de294a586
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
Gregory Nutt
2043e1a114
IOBs: Move from driver/iob to a better location in mm/iob
2017-05-09 07:35:30 -06:00
Gregory Nutt
a55e937643
Correct mispelling
2017-04-22 17:03:34 -06:00
Gregory Nutt
79256573e1
net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment.
2017-04-22 11:10:30 -06:00
Gregory Nutt
bfb93338f6
Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled.
2017-04-20 16:08:49 -06:00
Gregory Nutt
86239d4a73
Experimental change to STM32 Ethernet driver a success. Porting change to all other Ethernet drivers.
2017-03-03 14:45:09 -06:00
Mark Schulte
b3222bbc8a
irq_dispatch: Add argument pointer to irq_dispatch
...
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
Gregory Nutt
8ee2e8d8b0
Most Ethernet drviers: Check if the poll timer is running before restarting it at the end of each TX.
2017-02-24 15:58:17 -06:00
Gregory Nutt
1d290c2b37
setvbuf: Add support for disabling I/O buffering. Initially cut; untested.
2017-02-09 09:24:44 -06:00
Gregory Nutt
62a1f6f110
up_timer_initialize() is named incorrectly. The prefix should be the architecture name, not up_ since it is private to the architecture. up_timerisr() is similarly misnamed and should also be private since it is used only with the xyz_timerisr.c files. Also updat TODO list.
2017-02-07 10:35:04 -06:00
Gregory Nutt
3ed091376c
In all implementations of _exit(), use enter_critical_section() vs. disabling local interrupts.
2017-01-13 11:08:24 -06:00
Gregory Nutt
13d00344c9
Add configuration to prevent selection of Windows native toolchains when using Ubuntu under Windows 10
2017-01-02 07:16:47 -06:00
Gregory Nutt
3a0413c048
Back out most of 34be3e7c3c and update README again. Windows native tools cannot be used with Ubuntu under Windows 10 now. For Cygwin, that support depends on the 'cygpath -w' tool to convert POSIX paths to Windows paths. There is no corresponding tool for Ubuntu under Windows 10.
2017-01-01 16:29:03 -06:00
Gregory Nutt
34be3e7c3c
Add configuration support for builds with Ubuntu under Windows 10
2017-01-01 15:34:23 -06:00
Gregory Nutt
7467329a98
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
2016-12-03 16:28:19 -06:00
Gregory Nutt
43459fe75e
DM09x0 Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 11:42:15 -06:00
Gregory Nutt
b29b77532f
Update some comments
2016-11-29 18:17:37 -06:00
Gregory Nutt
934aded293
arch/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER
2016-11-29 16:06:48 -06:00
Ramtin Amin
137586f50a
Misoc LM32: Add logic to flush/invalidate caches
2016-11-29 09:09:28 -06:00
Gregory Nutt
1f9e3ae5f1
Misoc LM32: Make naming consistent, lm32_sigdeliver vs. up_sigdeliver.
2016-11-28 11:18:07 -06:00
Ramtin Amin
b568bfa813
Misoc LM3: Add Misoc Ethernet driver. Integrate network support into configs/misoc/hello. Remove configs/misoc/include/generated directory. I suppose the the intent now is that this is a symbolic link? DANGER! This means that you cannot compile this code with first generating these files a providing a symbolic link to this location!
2016-11-28 11:08:29 -06:00
Ramtin Amin
7568aaf213
Misoc LM32: Add signal handling logic
2016-11-24 12:58:23 -06:00
Ramtin Amin
b8754afb14
Misoc LM32: Make system timer configurable via CONFIG_USEC_PER_TICK.
2016-11-23 07:00:57 -06:00
Gregory Nutt
d95b8f64f5
sam4s-xplained-pro: Remove obsolete timer initialization logic
2016-11-22 12:25:57 -06:00
Gregory Nutt
054072d054
Misoc: Add commits and warnings about missing caculation of the timer reload value
2016-11-22 12:15:34 -06:00
Ramtin Amin
d1e84fb788
Misoc: Add timer driver
2016-11-22 12:10:11 -06:00
Ramtin Amin
31d9565f0f
Misoc LM32: Corrects a bug that never occured in qemu on simulation or real fpga. The error was that the r1 register was being modified out of context switching and not restoring it.
2016-11-14 07:18:33 -06:00
Ramtin Amin
693f8d743d
LM32: Move interrupt definitions from common irq.h to lm32/irq.h. Remove unused misoc_uart.c and .h
2016-11-07 10:13:53 -06:00
Gregory Nutt
424ffc76dc
LM32: Add missing _exit() logic (untested)
2016-11-07 07:31:15 -06:00
Gregory Nutt
86ef659ee5
LM32: Fix a typo in my many patching; eliminate some warnings
2016-11-07 07:16:53 -06:00
Ramtin Amin
fe2b755791
LM32: Correct some assembly language interrupt handling issues. Now the basic port seems functional.
2016-11-07 06:54:57 -06:00
Gregory Nutt
5ac9136b21
LM32: Implement some commented out logic in lm32_dumpstate
2016-11-06 10:46:11 -06:00
Gregory Nutt
45f549d2b8
LM32: Back out part of last change
2016-11-05 17:39:06 -06:00
Gregory Nutt
3f150daf96
LM32: Oops, missed one line of code in the manual application of a patch
2016-11-04 19:41:43 -06:00
Gregory Nutt
1c05eb651c
LM32: lm32_vectors.S needs to call lm32_doirq(), passing two parameters
2016-11-04 19:29:54 -06:00
Gregory Nutt
0b83e8afaa
LM32: Remove some extra spacing
2016-11-04 17:48:24 -06:00
Gregory Nutt
6cc73f0405
LM32: Fix a copy/paste error in lm32_vectors.S that I introduced.
2016-11-04 17:42:10 -06:00
Gregory Nutt
911e5abb2c
LM32: Fix various compilation errors that I introduced.
2016-11-04 17:37:10 -06:00
Gregory Nutt
5a9d3b20fa
LM32: Add README. Update hello defconfig and setenv.sh
2016-11-04 17:19:42 -06:00
Gregory Nutt
af0d7a96fe
LM32: More standard, common helper functions
2016-11-04 14:42:17 -06:00
Ramtin Amin
45caca804a
LM32: Progress on interrupt and serial driver.
2016-11-04 14:04:43 -06:00
Gregory Nutt
8fe916e133
Attach the software interrupt handler when interrupts are intialized.
2016-11-04 11:23:33 -06:00
Gregory Nutt
50efe4a906
LM32: Add a fake IRQ number for a software interrupt.
2016-11-04 11:17:12 -06:00
Ramtin Amin
b2126738cd
LM32: Fix implementation of up_irq_save() and up_irq_restore()
2016-11-04 10:54:10 -06:00
