sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
31,918 Commits 1 Branch 0 Tags 291 MiB
de6b13b3ab
Commit Graph

776 Commits

Author SHA1 Message Date
Gregory Nutt
de6b13b3ab Per OpenGroup.org, syslog -- and, hence, nonstandard vsyslog, and debug wrappers -- does not return a value. Rename _vsyslog to nx_vsyslog. Use internal nx_vsyslog in the few cases where a return value is required. 2018-03-04 08:07:07 -06:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Gregory Nutt
a8b6be4aaf The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method. 2018-01-22 08:17:45 -06:00
Gregory Nutt
62b8026976 Remove CONFIG_GRAN_SINGLE. It adds no technical benefit (other than some minor reduction in the number of interface arguments) but adds a lot of code complexity. Better without it. 2017-11-14 11:47:12 -06:00
Gregory Nutt
2f1894f2b4 Z80: Makefile fix for use with curre SDCC 2017-10-11 07:00:24 -06:00
Gregory Nutt
9568600ab1 Squashed commit of the following: 
This commit backs out most of commit b4747286b1.  That change was added because sem_wait() would sometimes cause cancellation points inappropriated.  But with these recent changes, nxsem_wait() is used instead and it is not a cancellation point.

    In the OS, all calls to sem_wait() changed to nxsem_wait().  nxsem_wait() does not return errors via errno so each place where nxsem_wait() is now called must not examine the errno variable.

    In all OS functions (not libraries), change sem_wait() to nxsem_wait().  This will prevent the OS from creating bogus cancellation points and from modifying the per-task errno variable.

    sched/semaphore:  Add the function nxsem_wait().  This is a new internal OS interface.  It is functionally equivalent to sem_wait() except that (1) it is not a cancellation point, and (2) it does not set the per-thread errno value on return.
 2017-10-04 15:22:27 -06:00
Gregory Nutt
42a0796615 Squashed commit of the following: 
sched/semaphore:  Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable.  Changed all references to sem_post in the OS to nxsem_post().

    sched/semaphore:  Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable.  Changed all references to sem_destroy() in the OS to nxsem_destroy().

    libc/semaphore and sched/semaphore:  Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable.  Changed all references to sem_setprotocol in the OS to nxsem_setprotocol().  sem_getprotocol() was not used in the OS
 2017-10-03 15:35:24 -06:00
Gregory Nutt
83cdb0c552 Squashed commit of the following: 
libc/semaphore:  Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable.  Changed all references to sem_getvalue in the OS to nxsem_getvalue().

    sched/semaphore:  Rename all internal private functions from sem_xyz to nxsem_xyz.  The sem_ prefix is (will be) reserved only for the application semaphore interfaces.

    libc/semaphore:  Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable.  Changed all references to sem_init in the OS to nxsem_init().

    sched/semaphore:  Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.

    sched/semaphoate:  Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
 2017-10-03 12:52:31 -06:00
Gregory Nutt
a5f3e1e6d1 compiler.h, limits.h, types.h: Update SDCC/z80 files to include support for long long, inline, __FILE__, and __func__. 2017-10-01 09:02:53 -06:00
Gregory Nutt
b436e3a2c8 A few more fixes for compilation with current SDCC compiler 2017-10-01 07:43:59 -06:00
Gregory Nutt
2043e1a114 IOBs: Move from driver/iob to a better location in mm/iob 2017-05-09 07:35:30 -06:00
Sebastien Lorquet
c70d797229 misc archs 2017-04-28 18:24:06 +02:00
Gregory Nutt
a55e937643 Correct mispelling 2017-04-22 17:03:34 -06:00
Gregory Nutt
79256573e1 net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment. 2017-04-22 11:10:30 -06:00
Gregory Nutt
bfb93338f6 Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled. 2017-04-20 16:08:49 -06:00
Gregory Nutt
86239d4a73 Experimental change to STM32 Ethernet driver a success. Porting change to all other Ethernet drivers. 2017-03-03 14:45:09 -06:00
Gregory Nutt
a581e9206d Convert remaining serial drivers to use use irq_attach. 2017-02-27 10:27:14 -06:00
Mark Schulte
b3222bbc8a irq_dispatch: Add argument pointer to irq_dispatch 
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
 2017-02-27 06:27:56 -06:00
Gregory Nutt
8ee2e8d8b0 Most Ethernet drviers: Check if the poll timer is running before restarting it at the end of each TX. 2017-02-24 15:58:17 -06:00
Gregory Nutt
1d290c2b37 setvbuf: Add support for disabling I/O buffering. Initially cut; untested. 2017-02-09 09:24:44 -06:00
Gregory Nutt
62a1f6f110 up_timer_initialize() is named incorrectly. The prefix should be the architecture name, not up_ since it is private to the architecture. up_timerisr() is similarly misnamed and should also be private since it is used only with the xyz_timerisr.c files. Also updat TODO list. 2017-02-07 10:35:04 -06:00
Gregory Nutt
3ed091376c In all implementations of _exit(), use enter_critical_section() vs. disabling local interrupts. 2017-01-13 11:08:24 -06:00
Gregory Nutt
13d00344c9 Add configuration to prevent selection of Windows native toolchains when using Ubuntu under Windows 10 2017-01-02 07:16:47 -06:00
Gregory Nutt
3a0413c048 Back out most of 34be3e7c3c and update README again. Windows native tools cannot be used with Ubuntu under Windows 10 now. For Cygwin, that support depends on the 'cygpath -w' tool to convert POSIX paths to Windows paths. There is no corresponding tool for Ubuntu under Windows 10. 2017-01-01 16:29:03 -06:00
Gregory Nutt
34be3e7c3c Add configuration support for builds with Ubuntu under Windows 10 2017-01-01 15:34:23 -06:00
Gregory Nutt
7467329a98 Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed. 2016-12-03 16:28:19 -06:00
Gregory Nutt
43459fe75e DM09x0 Ethernet now supports CONFIG_NET_NOINTS 2016-12-03 11:42:15 -06:00
Gregory Nutt
41e35c88bf eZ80 Ethernet now supports CONFIG_NET_NOINTS 2016-12-03 10:43:35 -06:00
Gregory Nutt
934aded293 arch/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER 2016-11-29 16:06:48 -06:00
Paul A. Patience
544f9ccf8a ez80: Add *PTR definitions to inttypes.h 2016-10-27 16:16:13 -04:00
Paul A. Patience
912fe06a86 Add architecture-specific inttypes.h 2016-10-27 16:01:38 -04:00
Gregory Nutt
56f2454c86 Fix names of pre-processor variables used in header file idempotence 2016-08-06 18:48:45 -06:00
Gregory Nutt
d41008e220 Update some header commments 2016-08-06 18:16:31 -06:00
Gregory Nutt
4b4dbc79a2 Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h 2016-07-20 13:15:37 -06:00
Gregory Nutt
d5388eca05 devrandom_register() must be called before devurandom_register() 2016-07-18 11:24:04 -06:00
Gregory Nutt
1660329d06 Rename up_rnginitialize to devrandom_register 2016-07-18 10:55:37 -06:00
David Alessio
6cefbc0c3f This change provides an option to add /dev/urandom to all architectures. The pseudo-random algorithm I choose strikes an arguably-good balance between being "random" and small/fast enough for 8/16 bit MCUs. It’s the well-documented xorshift128 algorithm. It has an internal state of 128 bits that can be [re-]seeded with a write. 2016-07-17 06:42:26 -06:00
Gregory Nutt
7b298a828d up_pminitialize() needs to be called from instances of up_initialize() 2016-07-15 13:11:28 -06:00
Gregory Nutt
d3b3c71d97 All architectures: Add logic to automatically register /dev/ptmx a boot time 2016-07-15 11:54:41 -06:00
Gregory Nutt
5118264e6c Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG 2016-06-21 09:35:51 -06:00
Gregory Nutt
62d8f839c7 SYSLOG: Now a two phase initialization. Some SYSLOG channels cannot be initialized until later in the bringup 2016-06-21 07:52:24 -06:00
Gregory Nutt
7f16548f57 Replaces last three commits. Does the same thing, but does it in a way that does not change the usage model. 2016-06-21 05:26:08 -06:00
Gregory Nutt
c05da80a27 Eliminate a warning 2016-06-20 22:54:58 -06:00
Gregory Nutt
505ca542e8 Remove some last traces of lowvsyslog that were missed; Add a SYSLOG emergency channel for handling assertion output more cleanly 2016-06-20 16:11:50 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72 Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn(). 2016-06-20 09:37:08 -06:00
Gregory Nutt
2b445ddccc Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces. 2016-06-20 08:57:08 -06:00
Gregory Nutt
0f18f3bd15 Move RAMLOG initialize from up_initialilize.c files to syslog_initialize(). up_initialize.c files now call syslog_initialize() unconditionally 2016-06-19 09:39:21 -06:00
Gregory Nutt
ac18dc27ca Common/Calypso/C5471: Convert *err() to either *info() or add ERROR:, depending on if an error is reported 2016-06-17 15:22:48 -06:00
Gregory Nutt
b39e53391d Add underscore at beginning of alert() as well 2016-06-16 12:38:05 -06:00