Gregory Nutt
|
c0c455a7c9
|
Nucleo-F4x1RE: Fix some joystick shield logic
|
2014-12-04 09:37:46 -06:00 |
|
Gregory Nutt
|
7180175793
|
Nucleo-F4x1RE: Add support for an analog joystick shield. There are still some ADC issues to be worked through as of the initial commit
|
2014-12-03 16:41:09 -06:00 |
|
Gregory Nutt
|
69fcd1c048
|
SAMA5D3 Xplained: A few fixes for the AJoystick driver (still not working)
|
2014-12-03 14:33:00 -06:00 |
|
Gregory Nutt
|
1f2447502f
|
SAMA5D3 Xplained: Add support for the Itead Joystick shield
|
2014-12-03 12:24:23 -06:00 |
|
Gregory Nutt
|
8c1e954b84
|
All USB MSC-related files under nuttx/configs changed to use the corrected syslog interfaces
|
2014-10-08 14:59:10 -06:00 |
|
Gregory Nutt
|
f40857c04f
|
All NSH-related files under nuttx/configs changed to use the corrected syslog interfaces
|
2014-10-08 14:28:55 -06:00 |
|
Gregory Nutt
|
712d130a13
|
Fix some comments: Remove button description from GPIO interrupt handlers that derive from the button interrupt handler
|
2014-09-29 12:22:31 -06:00 |
|
Gregory Nutt
|
23147c40a5
|
Remove final traces of the 8015 from the NuttX source tree
|
2014-09-01 13:21:15 -06:00 |
|
Gregory Nutt
|
004788d7c0
|
Change the way PHY interrupts work: disable automatically. Then we have to re-subscribe each time after the interrupt fires
|
2014-08-17 16:51:56 -06:00 |
|
Gregory Nutt
|
7cc93b708a
|
SAMA5 PHY: Add more debug instrumentation; Fix logic that would be used to disable PHY interrupts
|
2014-08-17 14:07:53 -06:00 |
|
Gregory Nutt
|
1db9858e9d
|
KSZ80x1 PHY interrupts are active low and should trigger on the falling edge
|
2014-08-17 13:15:59 -06:00 |
|
Gregory Nutt
|
057af36c1d
|
More of the PHY event notification logic change: Fix some compile errors when full feature is enabled; Add some missing ioctol logic
|
2014-08-16 15:04:09 -06:00 |
|
Gregory Nutt
|
ec47914cf8
|
Convert existing board specific PHY interrupt interfaces to use newly defined standard interface
|
2014-08-16 08:35:31 -06:00 |
|
Gregory Nutt
|
1787b3e600
|
SAMA5: Enable the 32.768 crystal if SCHED_TICKLESS is selected
|
2014-08-11 14:29:43 -06:00 |
|
Gregory Nutt
|
7b1b915226
|
SAMA5D4: Add auto-mounter support for HSMCI0
|
2014-07-29 15:34:31 -06:00 |
|
Gregory Nutt
|
695d1d933c
|
Some cosmetic typo fixes
|
2014-07-09 07:12:16 -06:00 |
|
Gregory Nutt
|
befcb1c961
|
Fix some cloned errors in SAM GPIO interrupt setup
|
2014-07-07 15:54:37 -06:00 |
|
Gregory Nutt
|
e0a07125c8
|
SAMA5D3/4: More renaming. Change SAMA5D3 EMAC to EMACA and SAMA5D4 to EMACB so that the configuration and build system can configure them. I might come up with something better later
|
2014-06-10 17:40:25 -06:00 |
|
Gregory Nutt
|
1f64e9c5b9
|
SAMA5: Back out most of commit c37b5b7b97d0644743c04f2c3d9e2b7ef9f5d698. Things are going to have to be done differently
|
2014-06-09 12:16:16 -06:00 |
|
Gregory Nutt
|
da8dfdcb6f
|
Updated SAMA5 SFR header file for the SAMA5D4
|
2014-06-08 07:48:36 -06:00 |
|
Gregory Nutt
|
18224d88b3
|
Update SAMA5D4-EK PIO usage
|
2014-06-07 09:37:17 -06:00 |
|
Gregory Nutt
|
495b190e50
|
SAMA5: Rename most EMAC definitions to EMAC0 to handle the SAMA5D4 which has to EMAC modules and no GMAC
|
2014-06-04 12:04:24 -06:00 |
|
Gregory Nutt
|
bd274dba7f
|
SAMA5: Fix some issues with SDRAM at 528MHz CPU clock
|
2014-04-04 11:37:39 -06:00 |
|
Gregory Nutt
|
0b7ec97370
|
SAMA5 boards: Operation at 528Mhz has been verified
|
2014-04-04 10:36:53 -06:00 |
|
Gregory Nutt
|
a44a4444e2
|
Cosmetic updates to comments and README files
|
2014-03-31 15:10:15 -06:00 |
|
Gregory Nutt
|
8bc70e38ab
|
SAMA5D3 Xplained: Has no NOR flash. Remove all NOR support from board configuration
|
2014-03-29 15:05:09 -06:00 |
|
Gregory Nutt
|
09fb2a1893
|
Add basic board support framework for the Atmel SAMA5D3 Xplained board (not finished)
|
2014-03-28 15:20:26 -06:00 |
|