Gregory Nutt
1299160d1d
SAMV71-XULT: Add call to can_txready() to MCAN driver. This is part of a fix to a CAN hang problem
2015-11-03 10:47:37 -06:00
Gregory Nutt
ed3d6fc7a0
SAMV7 QSPI: Delays need to be in units of nsec, not usec. Default delays should be 0 nsec
2015-09-01 11:16:09 -06:00
Gregory Nutt
b6515bbd4d
SAMV71 QSPI: Changes resulting removing of clocking
2015-08-29 18:53:27 -06:00
Gregory Nutt
b887d39d2e
SAMV7 QSPI: Add DMA transfer support
2015-08-29 10:02:59 -06:00
Gregory Nutt
4e347080e6
Update comments in Kconfig file
2015-08-21 18:15:09 -06:00
Gregory Nutt
5196a4183c
SAMV7 USBHS device: Fix how we send data on control endpoints; fix how we select USB address
2015-08-19 11:36:38 -06:00
Gregory Nutt
4b96605f93
SAMV7 MAN: Add support for bit timing IOCTL commands
2015-08-18 11:20:22 -06:00
Gregory Nutt
b7d6720a23
All CAN drivers: Set the new error indication to zero in the CAN message report
2015-08-18 07:24:12 -06:00
Gregory Nutt
4f122d5290
SAMV71 MCAN: Default clock source should be MCK, not MAIN
2015-08-17 11:03:15 -06:00
Gregory Nutt
ff38abf580
SAMV7 MCAN: Should support standard CAN IDs in extended ID mode
2015-08-17 10:52:58 -06:00
Gregory Nutt
a44a208ff6
SAMV71 MCAN: Change Kconfig so that zero is no longer the default value for the size of RXFIFO0, RXFIFO1, and TXFIFIQ. In fact, zero is not an illegal value
2015-08-13 08:13:49 -06:00
Gregory Nutt
1fbd5351ff
Fix typo in a Kconfig file
2015-08-09 15:50:04 -06:00
Gregory Nutt
c7eaa00ed4
SAMV7 SPI slave: Add output queuing and interrupt handling
2015-08-09 15:42:32 -06:00
Gregory Nutt
7e7150899a
SAMV7: Add configuration options to select SPI slave (slave driver not yet committed)
2015-08-09 09:47:06 -06:00
Gregory Nutt
a7a52252a8
SAMV7 MCAN: Fix DCACHE configuration dependency; Mkae sure DMA buffers are aligned to the cache line size at the end, Make RX FIFO1 the high priority FIFO and it it preference for RX input
2015-08-07 12:31:01 -06:00
Gregory Nutt
983df071c3
STM32V7 MCAN: CAN FD mode depends on support from the upper half driver, so it is now global CAN configuration
2015-08-05 13:55:20 -06:00
Gregory Nutt
92f5bf01c3
SAMV7 MCAN: Correct some compile errors when only MCAN1 is enabled
2015-08-05 08:07:25 -06:00
Gregory Nutt
c30cfe2025
SAMV7 MCAN driver is code complete (with some missing functionality)
2015-08-05 07:09:29 -06:00
Gregory Nutt
62a9aed53a
SAMV7 MCAN: Add logic to send messages usign the TX FIFOQ
2015-08-04 11:41:38 -06:00
Gregory Nutt
e89d8c4a5f
SAMV7 MCAN: Remove SAMA5 kruft; beginning of some interrupt logic
2015-08-03 13:50:02 -06:00
Gregory Nutt
cabe75a51d
SAMV71 MCAN: Add some mode-related initialization logic
2015-08-02 14:51:01 -06:00
Gregory Nutt
fe211d1b88
SAMV7 MCAN: remove old AUTOBAUD option; add a local LOOPBACK option
2015-08-02 11:18:51 -06:00
Gregory Nutt
a3ec0a1414
SAMV7: Complete MCAN configuration options
2015-08-01 12:40:18 -06:00
Gregory Nutt
6c9e8b5092
SAMV7 MCAN: Add some definitions for the PCK5 clock source and prescaler
2015-07-31 11:24:29 -06:00
Gregory Nutt
1638d61389
SAMV7 MCAN Driver. Initial commit is just the SAMA5 CAN driver with naming changes. It should not even compile yet
2015-07-31 10:11:01 -06:00
Gregory Nutt
fb926e7283
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
5dab61f434
SAMV7 USB device: Finish option to force full speed mdoe
2015-04-06 10:07:12 -06:00
Gregory Nutt
d3beea967d
Cortex-M7: Add support for enabled the D-Cache in write only mode.
...
SAMV7 Ethernet: I- and D-Cache are now enabled in the netnsh/ configuration. D-Cache is enabled in write-though mode. This mode is necessary because the DMA descriptors are each 8-bytes in size but the D-Cache cache line is 32-bits in size. So it is impossible make coherency for every 8-byte DMA descriptor without write-through.
2015-03-29 14:42:03 -06:00
Gregory Nutt
ae0b0ca3fd
SAMV7/Cortex-M7: Add support for write through D-Cache. SAMV7 Ethernet look like it needs this
2015-03-29 13:09:22 -06:00
Gregory Nutt
948531c352
SAMV7: Add configuration logic and clock setup for USB device
2015-03-21 07:28:59 -06:00
Gregory Nutt
a590bdc737
SAMV7: Quick'n'dirty port of the SAMA5D4 Ethernet MAC driver to the SAMV7. Still some unresovled issues with DCache handling
2015-03-16 13:51:37 -06:00
Gregory Nutt
b24ad6ae63
SAMV7: More SDRAM logic. It does still does not work
2015-03-14 13:27:00 -06:00
Gregory Nutt
cbfe1c7699
SAMV7: Fix some cloning errors. SAMA5->SAM7
2015-03-13 10:38:10 -06:00
Gregory Nutt
8f59fc8f64
SAMV7: Quick'n'dirty port of the SAMA5 HSMCI driver to the SAMV7
2015-03-12 18:03:41 -06:00
Gregory Nutt
0d79e315fd
SAMV71: Quick'n'dirty port of the SAMA5 SSC driver to the SAM7. The IP is compatible but there are still some DMA- and Cache-related issues that need to be worked out.
2015-03-12 16:00:38 -06:00
Gregory Nutt
9b6c7661a4
SAMV7: Add TWI/I2C driver (untested)
2015-03-12 10:58:11 -06:00
Gregory Nutt
ca48fbfc4a
SAMV7: Add SPI header files and driver
2015-03-12 09:12:37 -06:00
Gregory Nutt
9e10f868eb
SAMV7: Update floating point and TCM configuration options. Update TODO list. Update comments. Refresh a configuration
2015-03-10 07:50:32 -06:00
Gregory Nutt
29dbba1693
Cortex-M7: Add cache operations
2015-03-09 15:41:48 -06:00
Gregory Nutt
aa22bec093
SAMV7: Leverage XDMAC driver from the SAMA5D4.
2015-03-09 10:11:12 -06:00
Gregory Nutt
9d32caaa2c
SAMV7: Add serial driver
2015-03-08 10:15:42 -06:00
Gregory Nutt
89fd098a20
SAMV7: Add SAMV71 peripheral IDs and interrupt vector definitions
2015-03-05 16:34:22 -06:00
Gregory Nutt
f4ec5efe3a
SAMV71: Add memory map header file
2015-03-05 15:47:29 -06:00
Gregory Nutt
67c21e6817
SAMV7 Kconfig: Add peripheral selections
2015-03-05 13:51:39 -06:00
Gregory Nutt
02e613b277
Add basic build directories and configuration logic for the SAMV7 family
2015-03-05 10:00:24 -06:00
