sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
42,759 Commits 1 Branch 0 Tags
Commit Graph

18141 Commits

Author SHA1 Message Date
Gustavo Henrique Nihei
e13dd7dab9 arch/xtensa: Remove FAR qualifier for Xtensa-specific files 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-22 08:16:01 -03:00
Gustavo Henrique Nihei
58f87ef443 xtensa/esp32: Fix wrong position for ++ operator on I2C driver 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-22 08:16:01 -03:00
Jari van Ewijk
e5f17f6604 S32K1XX: Add FlexIO registers 2021-09-22 03:15:42 -07:00
David Sidrane
a9ff808dd1 stm32xx:sdmmc/sdio remove redundant GPIO config 
The stm32_gpiosetevent calls stm32_configgpio. So
   the pin is infact restored to the SDMMC/SDIO D0.

   The seconday init, dropped interrupts in a debug
   build with HW stack checking on after the GPIO glich
   fixes and that was how it was detected.
 2021-09-21 18:25:16 -07:00
David Sidrane
a8d5f21f81 stm32H7:Etablish device before enabling outputs 
This prevents gliches on changing to an output mode.
   If not the ALT mux can be selecting a IP block that
   is drving the line to say 0. Then the output is connected
   to that source, then swithced to the correct source.
 2021-09-21 18:25:16 -07:00
David Sidrane
5e19ebb818 stm32F7:Etablish device before enabling outputs 
This prevents gliches on changing to an output mode.
   If not the ALT mux can be selecting a IP block that
   is drving the line to say 0. Then the output is connected
   to that source, then swithced to the correct source.
 2021-09-21 18:25:16 -07:00
David Sidrane
d5e306e6f3 stm32:Etablish device before enabling outputs 
This prevents gliches on changing to an output mode.
   If not the ALT mux can be selecting a IP block that
   is drving the line to say 0. Then the output is connected
   to that source, then swithced to the correct source. This
   produced a 430 nS glich on a F4 @168 Mhz. It was a enough
   to corrupt an I2C device with a bus monitor.
 2021-09-21 18:25:16 -07:00
Sara Souza
fc12d6888b risc-v/esp32-c3: Group static variables into a struct and prevent an unitialized thread to be deleted 2021-09-21 15:45:59 +02:00
P.Brier
35824b449a Added CONFIG_ETH0_PHY_DP83825I to imxrt_enet: make driver compile for teensy 4.1 (link detection needs more checks to see if it works as expected) 2021-09-21 10:27:33 -03:00
P.Brier
f9850cf433 Fixed imxrt flexcan driver compilation error due to incorrect scope of variable 2021-09-21 10:00:12 -03:00
Abdelatif Guettouche
9f4d7e4767 xtensa_dumpstate.c: Fix the name of the TCB variable when dumping the 
backtrace.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-09-21 09:22:28 -03:00
Eero Nurkkala
812f504c16 mpfs: emmcsd: add Kconfig/Makefile and board files 
Add necessary Kconfig, Make.defs, Makefile and board
file changes.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-09-18 12:18:09 -03:00
Eero Nurkkala
772432e7c3 mpfs: add emmcsd driver 
This adds the emmcsd driver for the Polarfire Icicle kit.
The driver has been tested with several SD-cards, such as:

 - Kingston 32 GB SDS2 Canvas Select Plus
 - Kingston MicroSD Canvas Select Plus
 - Sandisk Extreme PRO 32 GB
 - Transcend 8 GB MicroSD

The internal eMMC hasn't been tested comprehensively.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-09-18 12:18:09 -03:00
Xiang Xiao
75a119ac1c arch: Compile up_puts in all Make.defs 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-09-18 07:33:44 -03:00
Xiang Xiao
71c61b11d9 arch/riscv: Rename riscv_puts to up_puts 
since it's a common API defined in include/nuttx/arch.h

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-09-18 07:33:44 -03:00
Xiang Xiao
0625f9888c arch/z16: Implement up_puts function 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-09-18 07:33:44 -03:00
Xiang Xiao
5b75df2203 arch/sim: Implement up_puts function 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-09-18 07:33:44 -03:00
jsun
f4b6bb281c Update bl602 MTU_SIZE and TX_BUF_SIZE 
N/A

Signed-off-by: jsun <jsun@bouffalolab.com>
 2021-09-17 22:11:30 -05:00
jsun
d489392d08 Add bl602 os adapter layer 
N/A

Signed-off-by: jsun <jsun@bouffalolab.com>
 2021-09-17 22:11:30 -05:00
Abdelatif Guettouche
15b68b9abb esp32_spiflash.c: Correctly disable APP's CPU cache. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-09-17 17:43:45 -03:00
Masayuki Ishikawa
204d88bcf3 arch: cxd56xx: Replace the critical section with spinlock in cxd56_serial.c 
Summary:
- This commit replaces the critical section with spinlock in cxd56_serial.c

Impact:
- None

Testing:
- Tested with spresense:rndis_smp, spresense:rndis
  and spresense:rndis_wifi

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2021-09-16 21:56:40 -05:00
Alin Jerpelea
48f92e6f1d author: Bill Gatliff : update licenses to Apache 
Gregory Nutt has submitted the SGA
Bill Gatliff has submitted the ICLA

as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-09-16 21:56:08 -05:00
Gustavo Henrique Nihei
52cea558af risc-v/esp32c3: Make the semaphore timeout on I2C configurable 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-16 14:07:26 -03:00
Gustavo Henrique Nihei
b33ccd01cf xtensa/esp32: Make the semaphore timeout on I2C configurable 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-16 14:07:26 -03:00
zhuyanlin
7947e50f06 xtensa:backtrace: flush to stack when in interrupt 
The registers may be in window during interrupt.
Flush window stack to stack first.
And fix warning in build.

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
 2021-09-16 10:53:35 -05:00
Peter Bee
2a8b076b38 risc-v/esp32c3: fix pwm driver bug 
Wrong offset sign and pwm multichan fix

Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
 2021-09-16 08:38:49 -03:00
zhuyanlin
cdb441cc3f arch:xtensa:dumpstate: use sched_dumpstack 
Use sched_dumpstack instead. The backtrace infomation like

xtensa_user_panic: User Exception: EXCCAUSE=0009 task: hello
xtensa_registerdump:    PC: 202b32b8    PS: 00060030
xtensa_registerdump:    A0: a02acb87    A1: 20998d10    A2: ffffaaaa    A3: 12345678
xtensa_registerdump:    A4: a02ba26c    A5: 209949c0    A6: 20990994    A7: 00000258
xtensa_registerdump:    A8: a02b32af    A9: 20998cb0   A10: 0000000f   A11: 209949a0
xtensa_registerdump:   A12: a02be95c   A13: 20994980   A14: 00000003   A15: 209949d0
xtensa_registerdump:   SAR: 00000000 CAUSE: 00000009 VADDR: ffffaaaa
xtensa_registerdump:  LBEG: 00000000  LEND: 00000000  LCNT: 00000000
xtensa_registerdump:  TMP0: 202b1512  TMP1: 20998af0
sched_dumpstack: [BackTrace| 3|0]:  0x202acbae 0x202b232e 0x202b1912 0x202b19f5 0x202b24f1 0x202b152f    0x40023 0x202b32b0
sched_dumpstack: [BackTrace| 3|1]:  0x202acb87 0x202a86a4

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
 2021-09-16 10:32:38 +08:00
zhuyanlin
6e0f84dc88 arch:xtensa: add up_backtrace support 
Up_backtrace can be backtrace from task or interrupt.

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
 2021-09-16 10:32:38 +08:00
zhuyanlin
3acdbef60d xtensa:arch: force up_getsp to inline 
Up_getsp may be not inline in gcc, thus get the sp
is up_getsp function's sp, not the caller function.

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
 2021-09-16 10:32:38 +08:00
zhuyanlin
583dce0b98 arch:xtensa: remove WSBITS/WBBITS to core.h 
Remove WSBITS/WBBITS macro to core.h as may be used by
arch common code.

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
 2021-09-16 10:32:38 +08:00
Cis van Mierlo
b316c679c1 S32K1xx: added PM support 2021-09-15 12:20:23 -03:00
SPRESENSE
74df4b70b3 drivers: video: Rearchitect video driver 
Rearchitect video driver:
- Define two video I/F(struct imgsensor_ops_s and struct imgdata_ops_s),
  and support them.
- CISIF driver supports new video I/F struct imgdata_ops_s.
- ISX012 driver supports new video I/F struct imgsensor_ops_s.
- Move ISX012 driver to general driver directory.
 2021-09-15 07:06:35 +02:00
Juha Niskanen
4487b352c0 arch/arm/src/stm32l4: fix baud rate setting for LPUART 
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
 2021-09-14 08:57:25 -07:00
Harri Luhtala
7e3c813346 arch/arm/src/stm32l4: LPUART1 support 
Signed-off-by: Harri Luhtala <harri.luhtala@haltian.com>
 2021-09-14 08:57:25 -07:00
Abdelatif Guettouche
198c30eaa6 stm32*7/stm32_serial.c: Don't fake an interrupt when interrupts are not 
suppressed.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-09-14 22:50:43 +08:00
chao.an
ba9b829372 arch/arm: correct the function name from arm_getsp() to up_getsp() 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2021-09-14 22:48:47 +08:00
Cis van Mierlo
91c945a2e8 s32k1xx: added way to get the reset cause in proc fs 2021-09-14 08:35:41 +02:00
Sara Souza
83a9c2b24b xtensa/irq.h: Fixes the routine that clears the processor interrupt 2021-09-13 17:01:49 -03:00
Alin Jerpelea
bb54ed4227 author: OffCode Ltd : update licenses to Apache 
OffCode Ltd has submitted the SGA

as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-09-13 22:43:36 +08:00
zhuyanlin
8e6fbe700e xtensa:dcache_clean: use DCACHE_LINZESIZE instead of DCACHE_SIZE 
Clean_dcache use DCACHE_LINZESIZE instead of DCACHE_SIZE in addr loop

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
 2021-09-13 14:38:57 +08:00
Xiang Xiao
850367d5bb arch/arm: Add ARCH_CORTEXM55 Kconfig for cortex-m55 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-09-12 09:09:42 -03:00
Jukka Laitinen
3654db3517 mpfs: Modify IRQ handling to support also HART0 on PF 
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-09-11 23:33:01 +08:00
Janne Rosberg
8b560e7894 mpfs/i2c: fix bus initialize for i2c1 2021-09-11 23:33:01 +08:00
Janne Rosberg
1e3919e55a mpfs/corepwm: remove wrong header include 2021-09-11 23:33:01 +08:00
Janne Rosberg
7db3456824 risc-v/mpfs: serial: add termios support and init device clocks 2021-09-11 23:33:01 +08:00
Janne Rosberg
aa057e25f2 mpfs/i2c: adapt to sysreg define changes 2021-09-11 23:33:01 +08:00
Janne Rosberg
dc54ba924e mpfs/spi: adapt to sysreg define changes 2021-09-11 23:33:01 +08:00
Janne Rosberg
3e6b19dfc5 risc-v/mpfs: add more sysreg defines and fix clock and reset defines 2021-09-11 23:33:01 +08:00
Abdelatif Guettouche
31aa616bf2 stm32_serial.c: Don't fake a TX interrupt when interrupts are not 
suppressed.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-09-10 15:15:44 -07:00
David Sidrane
41e1696b27 stm32f4:USB otgdev Ensure proper EP state 
Repeated automated sercon, serdis on VBUS proved to fail
   for CDCACM DATA IN (device Serial TX). The root cause was
   that the EP was left active after disconnect. This resulted
   in the first serial write falling to kick-off the EP IN request.
   That should restart the EP ISR.
 2021-09-09 14:27:41 -04:00