The source directory contents of the OpenSBI directory lib/sbi may be
listed with a one-line wildcard. This makes the Make.defs file look
simpler. The rest of the files need to be picked one at a time.
Co-authored-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
OpenSBI may be compiled as an external library. OpenSBI commit d249d65
(Dec. 11, 2021) needs to be reverted as it causes memcpy / memcmp to
end up in the wrong section. That issue has yet no known workaround.
OpenSBI may be lauched from the hart0 (e51). It will start the U-Boot
and eventually the Linux kernel on harts 1-4.
OpenSBI, once initialized properly, will trap and handle illegal
instructions (for example, CSR time) and unaligned address accesses
among other things.
Due to size size limitations for the mpfs eNVM area where the NuttX
is located, we actually set up the OpenSBI on its own section which
is in the bottom of the DDR memory. Special care must be taken so that
the kernel doesn't override the OpenSBI. For example, the Linux device
tree may reserve some space from the beginning:
opensbi_reserved: opensbi@80000000 {
reg = <0x80000000 0x200000>;
label = "opensbi-reserved";
};
The resulting nuttx.bin file is very large, but objcopy is used to
create the final binary images for the regions (eNVM and DDR) using
the nuttx elf file.
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Assign ways to L2 zerodevice. L2 zero device is used for
the scratchpad functionality. The area may be used for the
harts communicating to each other.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
For FAT the same buffer is used for read and writes, there
is a possibility a cache line is dirty. But the fs is
not dirty and will not write the sector to disk. This can
be seen https://github.com/PX4/NuttX/pull/175
When the system is busy that cache line can be evicted after the
RX DMA has completed and overwrite the data in memory. The solution
is to invalidate before the DMA to prevent an evection causing an
overwite, and after the DMA it to insure coherency.
According to Make documentation:
- "Commas and unmatched parentheses or braces cannot appear in the text
of an argument as written";
- "Leading spaces cannot appear in the text of the first argument as
written".
Although in the current state it was not resulting in parsing issues, it
is better to fix it.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Current samv7 platform does not define SoC memories sizes. This define
both internal flash and sram memories sizes and update all defconfig
files.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
When it was in slow speed mode (by default), the output SDMMC_CK clock rise and
fall times were about 13 ns each, that were very slow and
prevented some SDIO devices from working.
This commit enables the MCAN driver to function with both rev A and rev B
version of the chip. The version of the chip is selected automtically from
SAM_CHIPID_CIDR register so there is no need to predefined it in the
configuration.
The functonality was tested on rev B version of the chip. The rev A was
not tested since I do not have the functional board but the code remains
the same as in the previous NuttX version so it should not cause any
additional troubles.
The code is co-authored by Miloš Pokorný who wrote the initial transition
to rev B of the chip.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Co-authored-by: Miloš Pokorný <milos.pokorny@seznam.cz>
Summary:
- This commit replaces the critical section with spinlock
- The logic is the same as cxd56_serial.c
Impact:
- None
Testing:
- Tested with lc823450-xgevk:bt
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2.fix some files to fix compile warning
3.remove blueteeth header files, which are not used in nuttx core.
4.fix configs and add lost files
5.update defconfig, remove useless items
6.fix compile warning for nuttx phyplus
7.delete useless: ble, h4, zblue defconfig files form phyplus configure folder
8.fix file format check error on phyplus source code
9.fix phyplus kconfig param error
10.update configure file for nuttx
The Atmel samv7 implements progmem functionality. However, there is
missing ARCH_HAVE_PROGMEM Kconfig symbol. This add missing symbol.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit adds DMA and TC support to SAMV7 AFEC driver. The AFEC (ADC)
can now be triggered by Timer/counter at chosen frewuency and samples can
be transfered via DMA with configurable number of samples. Timer/counter
trigger is now set as a default option with the possibility to change it
to software generated trigger.
DMA is inspired by SAMA5 driver and also uses ping pong buffers.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Just a minor change fixing some compile warnings and errros, does not have
any impact on functionality.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
we have many different hostfs implementation now, so it's better
to select the implementation explicitly, just like what we have
done for arm(FS_HOSTFS vs. ARM_SEMIHOSTING_HOSTFS).
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
The FAT was not coherent. Resulting in a write failed
with errno:28 No space left on device.
It is unclear how the memory is acesses prior to the DMA
completion. But this restructuring ensures the data
is coherent.
This issue was not detected on the stm32h7
- Add defconfig and board specific files
- Create mpfs/common for code which is shared between MPFS boards.
- Add support for GPIO driven EMMCSD mux.
- Move DDR Libero definitions from arch to boards.
Signed-off-by: Jani Paalijarvi <jani.paalijarvi@unikie.com>
When waiting for a response to a sent command, the command
complete bit (MPFS_EMMCSD_SRS12_CC) should always guarantee
the completion of that particular command. There's no need
to have some combinations skipping the check of the command
complete bit. Thus, remove the 'waitbits' parameter as it's
unnecessary.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Gregory Nutt has submitted the SGA
Haltian Ltd has submitted the SGA
Uros Platise has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
script.
These functions are strongly declared and thus will be used instead of
any other implementation. Furthermore, necessary Kconfig options are
selected to avoid building those function from NuttX's C library.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Currently configuring the uart3/4 as the serial console
doesn't work. Apply proper changes in mpfs_config.h that
enables the following configuration options:
- CONFIG_UART3_SERIAL_CONSOLE
- CONFIG_UART4_SERIAL_CONSOLE
Also, fix a typo in mpfs_lowputc.c that gives a compile
error if defined.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
When enable DEBUG_TCBINFO config, a global struct will
provide, then debuggers can aware nuttx task infomation.
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
This commit adds microcontroller support for Analog Front End driver to
samv7 MCUs. Only software trigger via IOCTL is currently supported,
averaging can be set by configuration option CONFIG_SAMV7_AFECn_RES.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
cppcheck reports the following:
arch/risc-v/src/mpfs/mpfs_emmcsd.c:2375:22: error: Uninitialized variable: waitbits [uninitvar]
while (!(status & (waitbits | MPFS_EMMCSD_SRS12_EINT))
The finding is positive and this patch initializes it to
zero properly.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Strongly-Ordered requires aligned access unless
caching is enabled.
Normal memory
Accesses to normal memory region are idempotent...
- unaligned accesses can be supported
With CONFIG_ARMV7M_DCACHE the cache maintenance operation
are not present. Or if CONFIG_ARMV7M_DCACHE_WRITETHROUGH
is on then buffering operations are no-ops.
This change enables MPU_RASR_C and MPU_RASR_B if
CONFIG_ARMV7M_DCACHE is only set.
if CONFIG_ARMV7M_DCACHE_WRITETHROUGH is set then only
MPU_RASR_C is enabled.
N.B When caching is disalbed unaligned access may cause hard faults
so add -mno-unaligned-access
It is always safe to enable Buffering in FLASH to achive unaligned
access leniency, as it is not written to.
1. Wi-Fi and BLE use common PHY functions.
2. Fix Wi-Fi & BLE coexist adapter error.
3. Update esp-wireless-drivers-3rdparty, provide coexist protection for connection.
