Gregory Nutt
|
e1769b22f1
|
Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures
|
2014-08-08 18:39:28 -06:00 |
|
Gregory Nutt
|
d798dd37a7
|
Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h
|
2014-08-08 17:53:55 -06:00 |
|
Gregory Nutt
|
23a334c066
|
Move task control files from sched/ to sched/task
|
2014-08-08 16:44:08 -06:00 |
|
Gregory Nutt
|
d4b56eb3cc
|
Move clock functions from sched/ to sched/clock
|
2014-08-08 14:43:02 -06:00 |
|
Gregory Nutt
|
85e8117062
|
Move interrupt dispatch logic from sched/ to sched/irq
|
2014-08-08 14:31:15 -06:00 |
|
Gregory Nutt
|
c9661ad5a7
|
Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors
|
2014-08-07 18:00:38 -06:00 |
|
Gregory Nutt
|
0aa7209765
|
Change CONFIG_MSEC_PER_TICK to CONFIG_USEC_PER_TICK. This gives more options for system timers in general, but more importantly, let's us realize higher resolution for the case of CONFIG_SCHED_TICKLESS=y -- of course, at the risk of some new interger overvflow problems
|
2014-08-07 13:42:47 -06:00 |
|
Gregory Nutt
|
520a51a3e1
|
Implements the tickless OS
|
2014-08-07 11:39:16 -06:00 |
|
Gregory Nutt
|
dc48bec019
|
Add support for a simulated interval timer support verification of the tickless OS.
|
2014-08-06 18:29:29 -06:00 |
|
Gregory Nutt
|
cc7cb0f031
|
Don't build in sched_processtimer.c if CONFIG_SCHED_TICKLESS is selected.
|
2014-08-06 18:27:10 -06:00 |
|
Gregory Nutt
|
0452b1555b
|
if CONFIG_SCHED_TICKLESS is defined, then the global variable g_system_timer does not exist
|
2014-08-06 18:26:16 -06:00 |
|
Gregory Nutt
|
736d3c169a
|
Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined.
|
2014-08-06 16:26:01 -06:00 |
|
Gregory Nutt
|
7b9c44101d
|
SAMA5D3 HSMCI: TX DMA is again disabled
|
2014-08-05 07:07:39 -06:00 |
|
Gregory Nutt
|
159bcc255d
|
SAMA5 PCK: Add Main clock as an option for the PCK clock source
|
2014-08-03 10:17:50 -06:00 |
|
Gregory Nutt
|
c75bf6d741
|
SAMA5 SSC: Verify that the requested bit width is supported. Correct some alignment tests that depend upon the data bit width.
|
2014-08-02 14:26:49 -06:00 |
|
Gregory Nutt
|
83dab03576
|
SAMA5 WM8904: Fix errors in programmable clock output configuration
|
2014-08-01 15:18:58 -06:00 |
|
Gregory Nutt
|
805a02965c
|
SAMA5 SSC: Start Delay is now configurable
|
2014-08-01 14:10:37 -06:00 |
|
Gregory Nutt
|
50bd2ba46c
|
SAMA5 SSC: Frame Synch Delay is now configurable
|
2014-08-01 12:25:31 -06:00 |
|
Gregory Nutt
|
0b4090df0d
|
SAMA5D SSC: Needs to account for data offset in audio buffer.
|
2014-07-31 19:14:24 -06:00 |
|
Gregory Nutt
|
c657139b30
|
SAMA5D3X-EK: Add support for the WM8904 audio CODEC
|
2014-07-31 11:14:57 -06:00 |
|
Gregory Nutt
|
24af676c05
|
SAMA5: Changes needed for a clean SAMA5D3 build after all of the recent SAMA5D4 changes.
|
2014-07-31 11:09:56 -06:00 |
|
Gregory Nutt
|
276cc44878
|
SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller.
|
2014-07-30 11:20:06 -06:00 |
|
Gregory Nutt
|
4df0fbec04
|
SAMA5D HSMCI: Fix a problem on card insertion/removal callback handling. Interrupts were being disable so that the callbacks occurred with interrupts disabled. This resulted in loss of some interrupts and some not-so-good behaviors. The solution is to perform all callbacks on the work thread unconditionally (2014-7-29).
|
2014-07-30 10:19:41 -06:00 |
|
Gregory Nutt
|
70be3bae16
|
SAMA5D HSMCI: Add method to do RX transfer without DMA. The 8-byte SCR transfer was failing silently with the DMA transfer, leaving the SD card in single bit mode
|
2014-07-29 21:13:28 -06:00 |
|
Gregory Nutt
|
2861636015
|
Cosmetic changes to comments
|
2014-07-29 07:17:01 -06:00 |
|
Gregory Nutt
|
53930d5531
|
SAMA5D-EK: Correct system timer frequency. Input clock is MCK/2, not MCK
|
2014-07-29 07:12:36 -06:00 |
|
Gregory Nutt
|
1b6eec572d
|
Cosmetic changes to comments
|
2014-07-29 07:11:16 -06:00 |
|
Gregory Nutt
|
8c2b458d75
|
Fixes to last SAMA5 PMIC checkin
|
2014-07-28 17:09:37 -06:00 |
|
Gregory Nutt
|
d450993f2e
|
LPC17xx: DC updates from Max. Also fixes some syntax errors that I introduced in the last commit.
|
2014-07-28 07:23:49 -06:00 |
|
Gregory Nutt
|
100bba42be
|
ARM: Move L2 cache initialization to much later in the sequence
|
2014-07-27 10:03:33 -06:00 |
|
Gregory Nutt
|
c523abdc62
|
ARMv7-A L2 Cache currently depends on EXPERIMENTAL because it does not yet work properly
|
2014-07-26 18:48:54 -06:00 |
|
Gregory Nutt
|
4446d6e98d
|
ARMv7 L2 Cache: Minor bugfixes/improvements
|
2014-07-26 18:48:26 -06:00 |
|
Gregory Nutt
|
0519118de2
|
Enables cache early in boot-up sequence
|
2014-07-26 18:48:00 -06:00 |
|
Gregory Nutt
|
d09ee81320
|
Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled
|
2014-07-26 18:47:33 -06:00 |
|
Gregory Nutt
|
0d83d198de
|
New cache.h file. Renames cp15_XYZ_cache() to arch_XYZ_cache() and addes L2 cache support if L2 cache is enabled
|
2014-07-26 18:46:52 -06:00 |
|
Gregory Nutt
|
ca3776a7ec
|
Rename ARMv7-A cache.h to cp15_cache.h. Things will be broken on this commit until I get the new cache.h in place.
|
2014-07-26 16:54:19 -06:00 |
|
Gregory Nutt
|
ec70cfe44c
|
arch/arm/src/armv7-a/arm_l2cc_pl310.c, l2cc.h, l2cc_pl310.h, Kconfig: Add initiali support for the ARM L2CC-PL310 L2 cache.
|
2014-07-26 16:50:08 -06:00 |
|
Gregory Nutt
|
be198337f7
|
ARMv7-A: L2CC PL310 address filtering is an optional feature
|
2014-07-25 19:46:09 -06:00 |
|
Gregory Nutt
|
ef5bfd72a6
|
ARMv7-A: Add missing L2CC PL310 bit definitions
|
2014-07-25 19:41:35 -06:00 |
|
Gregory Nutt
|
597c9839cc
|
rch/arm/armv7-a/l2cc_pl310.h: Move arch/arm/sama5/chip/sam_l2cc.h to arch/arm/armv7-a/l2cc_pl310.h. Adjust the two corresponding Kconfig files as well.
|
2014-07-25 17:25:17 -06:00 |
|
Gregory Nutt
|
47752a35c1
|
3rd time is a charm. Max is right, the initial priority setting should be NVIC_SYSH_PRIORITY_MIN
|
2014-07-24 16:51:07 -06:00 |
|
Gregory Nutt
|
8718dad9c8
|
Oops, should have been NVIC_SYSH_PRIORITY_DEFAULT
|
2014-07-24 16:42:15 -06:00 |
|
Gregory Nutt
|
7f5b88dbcd
|
LPC17 Ethernet: Added option to use the kernel worker thread to do most of the workload with CONFIG_NET_WORKER_THREAD option in Kconfig. Eliminated a problem with PHY DP83848C : it doesn't need a specific initialization on mbed. Critical bufix: From time to time (after some hours) the Ethernet receiver would lose one receive interrupt and the IP stack never recover because there is no receive watchdog as the transmit watchdog. From Max
|
2014-07-24 16:39:18 -06:00 |
|
Gregory Nutt
|
fdff663e57
|
Added burstmode ADC conversion mode, with CONFIG_ADC_BURSTMODE option in Kconfig. From Max
|
2014-07-24 16:23:31 -06:00 |
|
Gregory Nutt
|
ab572091c5
|
Mostly cosmetic changes from Max
|
2014-07-24 16:00:21 -06:00 |
|
Gregory Nutt
|
ad3626e61a
|
Eliminate warnings. From Max
|
2014-07-24 15:50:37 -06:00 |
|
Gregory Nutt
|
6dcb524d16
|
Correct the initial value of the BASEPRI register. This was apparently never being initialized. From Max
|
2014-07-24 15:37:13 -06:00 |
|
Gregory Nutt
|
0fcc0adaa2
|
Fix a recently introduced typo that was being masked by some bad conditional compilation
|
2014-07-22 11:45:14 -06:00 |
|
Gregory Nutt
|
17abe05357
|
Update ChangeLog
|
2014-07-22 07:25:01 -06:00 |
|
Gregory Nutt
|
3bb6a877fd
|
STM32 OTGFS device: Various changes to try to reduce that amount of time in interrupts handles and with interrupts disbled. Needs verification on other platforms. From Petteri Aimonen
|
2014-07-22 07:23:17 -06:00 |
|