Specify -mcmodel=large only on 64-bit case. (x86-64)
The code model is not available for 32-bit.
This fixes the following error:
MODULECC: chardev.c
cc1: error: code model 'large' not supported in the 32 bit mode
Makefile:79: recipe for target 'chardev.o' failed
since cxx initialization is controlled by CONFIG_HAVE_CXXINITIALIZE now
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I39438dc3006d0a0b810052ecef50cd3c92f09d83
On Linux, we (ab)use the host compiler to compile binaries for NuttX.
Explicitly disable features which might be default on the host while
not available on NuttX.
On macOS, this is not necessary because we use a cross compiler,
which has safer defaults for our purpose, to build binaries to
run on NuttX. But this doesn't hurt either.
Namely, always use -mcmodel=large.
NuttX modules are loaded into the NuttX heap, which can be out of
range for 32-bit relocations generated with -mcmodel=small.
A possible alternative would be to use MAP_32BIT to allocate sim heap.
But I prefer this approach because it's very convenient for me to
be able to share modules between Linux and macOS sim.
Documentation/NuttX.html:
Documentation/README.html:
README.txt:
boards/README.txt:
Document initial support for the STM32G474 MCU and
B-G474E-DPOW1 Discovery kit was added in NuttX-9.1.
The video stream driver must be intialized from the board to comply with NuttX
NOTE:
Please remove the initalization from any camera example
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
so the lower half driver don't need include the specific board.h
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Icf6638a6865bac42150b5957376e55909f041d40
so the lower half driver don't need include the specific board.h
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I2ff5c30049a5c5e8ee90baea56e9f4cb1a8a4f87
stm32_i2sdev_initialize to stm32_i2sbus_initiliaze, to be consistent
with the way other buses are initialized.
The stm32_i2sdev_initiliaze (similar to stm32_spidev_initialize for
example) is a board specific function that does any necessary
initialization that's board depedent.
This file is already included by most board's Makefile,
remove it to avoid override the board's specific CFLAGS
etc.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Restore OUTPUT_FORMAT and OUTPUT_ARCH for mips link scripts to fix Nightly build break logs:
p32-ld: pic32mx_head.o: compiled for a little endian system and target is big endian
p32-ld: pic32mx_head.o: endianness incompatible with that of the selected emulation
p32-ld: failed to merge target specific data of file pic32mx_head.o
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
let toolchain decide the correct value base on the command line
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I342db6a88e4a161a322a8fea48a59e6ca7617ae6
Only Make.defs files tht followed the same pattern as the ARM Make.defs were modified. This excludes some of the sim and renesas Make.defs files and all of the z80 Make.defs files.
This is a change suggested by Xiao Xiang in an email thread. Some make variables with depend on forking and shell and running a script to get the value of the variable. Using := we can force the calculation to occur only once. This leads to a small but consistent improvement in build performance.
This change really applies to ALL Make.defs files but is applied only to one here so that it can be thoroughly verified and possbily leveraged to other Make.defs files in the future.
boards/arm/stm32/b-g474e-dpow1/scripts/Make.defs:
* Apply the recent build script changes introduced in the
following git commits:
- 7e5b0f81e9 and
- e83c1400b6
to this board. Namely, factor the definitions of ARCHINCLUDES
and ARCHXXINCLUDES out of CONFIG_CYGWIN_WINTOOL conditional,
and use new build variable BOARD_DIR to simplify ARCHSCRIPT.
Add support for the STM32G474 family of microcontrollers and the
B-G474E-DPOW1 Discovery Board, which features a STM32G474RET6.
This is a major pull request as it adds support for an entirely
new family of STM32. This support is implemented in
arch/arm/src/stm32 and shares implementation with other STM32
families supported by that code, such as the 'L15xx, 'F10xx,
'F20xx, 'F3xxx, and 'F4xxx.
boards/Kconfig:
* Make NuttX recognize the existence of b-g474e-dpow1,
the B-G474E-DPOW1 Discovery Board.
boards/arm/stm32/b-g474e-dpow1/Kconfig:
boards/arm/stm32/b-g474e-dpow1/README.txt:
boards/arm/stm32/b-g474e-dpow1/configs/nsh/defconfig:
boards/arm/stm32/b-g474e-dpow1/include/board.h:
boards/arm/stm32/b-g474e-dpow1/scripts/Make.defs:
boards/arm/stm32/b-g474e-dpow1/scripts/ld.script:
boards/arm/stm32/b-g474e-dpow1/src/.gitignore:
boards/arm/stm32/b-g474e-dpow1/src/Make.defs:
boards/arm/stm32/b-g474e-dpow1/src/b-g474e-dpow1.h:
boards/arm/stm32/b-g474e-dpow1/src/stm32_appinit.c:
boards/arm/stm32/b-g474e-dpow1/src/stm32_autoleds.c:
boards/arm/stm32/b-g474e-dpow1/src/stm32_boot.c:
boards/arm/stm32/b-g474e-dpow1/src/stm32_userleds.c:
* Add minimal support for the B-G474E-DPOW1 Discovery
Board. The board boots successfully through to the
NSH prompt. NSH runs and is responsive.
With big thanks for detailed code review and suggestions:
David Sidrane (davids5)
Mateusz Szafoni (raiden00)
Abdelatif Guettouche (Ouss4)
- Remove old toolchain and buildroot support
- Enable builtin and add hello and renew commands
- Enable procfs and change name size to 24
- Enable stack coloration
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>>
