Philippe Coval
e2274a4194
freedom-k64f/demo: Support Ethernet
...
It was tested using:
nsh> ifconfig
eth0 Link encap:Ethernet HWaddr 52:13:FF:FF:FF:FF at DOWN
inet addr:10.0.0.2 DRaddr:10.0.0.1 Mask:255.255.255.0
All flags are needed to prevent build failures like:
chip/kinetis_enet.c:181:4:\
error: #error "Unrecognized or missing PHY selection"
netlib_setifstatus.c: In function 'netlib_ifup':
netlib_setifstatus.c:83:27: \
error: 'NETLIB_SOCK_TYPE' undeclared (first use in this function);
Change-Id: I9496528ae09f6244d73ab77dbcd307ced95f46fd
Bug: https://github.com/apache/incubator-nuttx/pull/1988
Forwarded: https://github.com/apache/incubator-nuttx/pull/2066
Signed-off-by: Philippe Coval <rzr@users.sf.net>
2020-10-23 00:34:17 +08:00
Philippe Coval
c39e380102
freedom-k64f/demo: Enable EXAMPLES_FXOS8700CQ
...
Depends on other flags that will be enabled automatically by kconfig:
CONFIG_SENSORS=y
CONFIG_SENSORS_FXOS8700CQ=y
Change-Id: Ic9bfbd02cca9f2fd4b1f1fb538100865a1c497ff
Bug: https://github.com/apache/incubator-nuttx/pull/1999
Forwarded: https://github.com/apache/incubator-nuttx/pulls/rzr
Signed-off-by: Philippe Coval <rzr@users.sf.net>
2020-10-22 22:33:35 +08:00
liuhaitao
f2d9f5c43a
configure.sh: update custom board config build
...
If Make.defs not found under boardconfig dir, then try
scripts/Make.defs.
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-10-22 11:12:10 -03:00
Brennan Ashton
23cd1e030e
Docs: Fix broken links and references in docs
...
Also add to the CI a problem matcher to better report issues
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
2020-10-22 10:22:11 -03:00
Brennan Ashton
c412021904
Docs: Bump version of pygments to get new GAS lexer
...
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
2020-10-22 10:22:11 -03:00
dongjiuzhu
8bd163325b
sensor: add wtgahrs2 init and enable config
...
Change-Id: I0521098d6157c59d4e0d463e43a2d202797577b6
Signed-off-by: dongjiuzhu <dongjiuzhu1@xiaomi.com>
2020-10-22 10:17:36 -03:00
dongjiuzhu
a3f978da02
sensor/driver: wtgahrs2 by serial interface follow sensor.c/sensor.h
...
Wtgahrs2 integrates multiple sensor: accel, gyro, mag, baro and gps.
Signed-off-by: dongjiuzhu <dongjiuzhu1@xiaomi.com>
2020-10-22 10:17:36 -03:00
dongjiuzhu
fa09c6a8bc
driver/sensor: add unified management for sensor
...
Signed-off-by: dongjiuzhu <dongjiuzhu1@xiaomi.com>
2020-10-22 10:17:36 -03:00
Masayuki Ishikawa
d1f82ced26
Revert "sched: Call up_[use|create]_stack after nxtask_setup_scheduler"
...
This reverts commit 6eba1ad90a
.
2020-10-22 18:31:31 +09:00
Xiang Xiao
6eba1ad90a
sched: Call up_[use|create]_stack after nxtask_setup_scheduler
...
to ensure the basic info(e.g. pid) setup correctly before call arch API
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I851cb0fdf22f45844938dafc5981b3f576100dba
2020-10-22 15:30:01 +09:00
dongjiuzhu
2b5be56bd0
serial/termios: support custom baud rate setting
...
N/A
Change-Id: I0cc00f6d0fda852533bd4a38ea6fc39e0d0059da
Signed-off-by: dongjiuzhu <dongjiuzhu1@xiaomi.com>
2020-10-21 10:11:21 -07:00
Philippe Coval
d90ef8374b
freedom-k64f: Enable SENSORS_FXOS8700CQ in demo config
...
Testing this flag in the CI pipeline
Change-Id: I46bf0d6f13d1d45e196e69733776f002f080e2ff
Bug: https://github.com/apache/incubator-nuttx/pull/1999
Forwarded: https://github.com/apache/incubator-nuttx/pulls/rzr
Signed-off-by: Philippe Coval <rzr@users.sf.net>
2020-10-22 00:48:24 +08:00
Nathan Hartman
81cfa88fc5
tiva/cc13x2_cc26x2: Fix nxstyle errors
...
arch/arm/src/tiva/hardware/cc13x2_cc26x2/cc13x2_cc26x2_adi4_aux.h,
arch/arm/src/tiva/hardware/cc13x2_cc26x2/cc13x2_cc26x2_aux_smph.h,
arch/arm/src/tiva/hardware/cc13x2_cc26x2/cc13x2_cc26x2_ddi.h,
arch/arm/src/tiva/hardware/cc13x2_cc26x2/cc13x2_cc26x2_memorymap.h,
arch/arm/src/tiva/hardware/cc13x2_cc26x2/cc13x2_cc26x2_smph.h:
* Fix nxstyle errors.
2020-10-22 00:20:42 +08:00
Alexander Vasiljev
d523757d4a
serial: break from read after closing
2020-10-21 09:20:04 -07:00
Philippe Coval
0e431e6bf0
freedom-k64f/demo: Enable CONFIG_SENSORS
...
This change is mostly for testing codebase
Change-Id: I50a024dd80661932bfb06aed5be2b4addbbdee8a
Bug: https://github.com/apache/incubator-nuttx/pull/1999
Forwarded: https://github.com/apache/incubator-nuttx/pulls/rzr
Signed-off-by: Philippe Coval <rzr@users.sf.net>
2020-10-21 21:29:10 +08:00
Diego Herranz
c0719b370d
Documentation/quickstart/debugging: rewrite SWD sentence
...
Original content rather than copy-paste from Wikipedia.
Discussed on https://github.com/apache/incubator-nuttx/pull/2031
2020-10-21 17:09:42 +08:00
Diego Herranz
345f2a7731
Documentation/quickstart/debugging.rst: fix NuttX capitalisation
2020-10-21 13:57:56 +08:00
Diego Herranz
b482cbdd04
Documentation/quickstart/debugging.rst: rewrite JTAG/OpenOCD section
...
- Add mentions to SWD
- Sony's OpenOCD fork no longer needed since Nuttx support was merged upstream
on http://openocd.zylin.com/#/c/4103/ . Recommended to build from source or use
one of the unofficial, more recent builds.
- Amazon link for Olimex adapter was no longer available so removed.
- Reordered and some parts rewritten
2020-10-21 13:57:56 +08:00
Philippe Coval
271016a3ad
kinetis: Make kinetis_i2c_sem_wait_noncancelable optional
...
CONFIG_I2C_RESET is coming from imxrt_lpi2c.c
Change-Id: I8f55eaf793386fe5ac1d4adaf310d6e0f08dcd92
Bug: https://github.com/apache/incubator-nuttx/pull/1999
Forwarded: https://github.com/apache/incubator-nuttx/pulls/rzr
Signed-off-by: Philippe Coval <rzr@users.sf.net>
2020-10-21 13:36:55 +08:00
Philippe Coval
17e624eae4
freedom-k64f: Add I2C to demo image
...
Both flag were selected manualy from menuconfig
Usage:
nsh> ls /dev/i2c0
nsh> i2c bus
BUS EXISTS?
Bus 0: YES
nsh> i2c dev 0 0x7F
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 00 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- 1d -- --
Change-Id: I86c68753609c521af9710190397ef492ae562e38
Bug: https://github.com/apache/incubator-nuttx/pull/1999
Forwarded: # https://github.com/apache/incubator-nuttx/pull/2047
Signed-off-by: Philippe Coval <rzr@users.sf.net>
2020-10-21 13:36:55 +08:00
Masayuki Ishikawa
19f7a243a7
boards: sabre-6quad: Update smp/defconfig
...
Summary:
- Remove CONFIG_HOST_WINDOWS=y
- Add CONFIG_READLINE_CMD_HISTORY=y
- Add CONFIG_STACK_COLORATION=y
Impact:
- Affects sabre-6quad:smp only
Testing:
- Tested with smp, ostest with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-10-21 11:49:45 +08:00
Masayuki Ishikawa
3ef388aefa
boards: lc823450-xgevk: Update rndis/defconfig
...
Summary:
- Add CONFIG_ARCH_STACKDUMP=y
- Add CONFIG_STACK_COLORATION=y
- Remove CONFIG_NSH_DISABLE_MB=y
- Remove CONFIG_NSH_DISABLE_MH=y
Impact:
- Affects lc823450-xgevk:rndis only
Testing:
- Tested with smp, ostest.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-10-21 11:49:45 +08:00
Masayuki Ishikawa
dad5a79bf3
arch: arm: Fix interrupt stack handlings for SMP
...
Summary:
- Modify arm_intstack_base() to return "top" of the IRQ stack for the current CPU
- This change fixes IRQ stack dump information for ARM SMP
- Add arm_intstack_alloc() to return "bottom" of the IRQ stack for the current CPU
- Also, these functions are now implemented in xxx_irq.c (imx/cxd56/lc823450)
- up_color_intstack() and up_check_intstack() now call arm_intstack_alloc()
- These semantics are now consistent with non-SMP case
- up_color_intstack() now initializes whole IRQ stack region for SMP
- Adjust IRQ stack top address for each CPU (e.g. -8)
- Fix setintstack to handle in case of NCPUS=1 (cxd56, lc823450)
- Adjust INTSTACK_SIZE to 8 bytes alignment (cxd56, lc823450)
- Refactor setintstack for lc823450
- Remove old IRQ stack coloring code from up_irqinitialize() (lc823450)
- Introduce g_cpu_intstack_top for lc823450
- Refactor header files
Impact:
- Affects imx6/cxd56xx/lc823450 SMP with interrupt stack enabled
Testing:
- Tested with sabre-6quad:smp (with QEMU, NCPUS=1 and 4)
- Tested with spresense:wifi_smp (NCPUS=1 and 2)
- Tested with lc823450-xgevk:rndis (NCPUS=1 and 2)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-10-21 11:49:45 +08:00
Masayuki Ishikawa
56a081515c
arch: imx6: Fix style warnings in chip.h
...
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-10-21 11:49:45 +08:00
Nakamura, Yuuichi
d8d19911ef
Add SCHED_INSTRUMENTATION_HIRES support
2020-10-21 00:33:10 +08:00
Nakamura, Yuuichi
e1b9c278f8
Update trace command document
2020-10-21 00:31:51 +08:00
Nakamura, Yuuichi
87a7c0317e
Add note_syscall args support
2020-10-21 00:31:51 +08:00
Xiang Xiao
897b61b057
build: Change .external_dummy to dummy
...
to better align with the arch, boards and drivers naming convention
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-20 10:26:17 -03:00
Sara Souza
fde7c2bc19
xtensa/tools: Updated makefile to download the IDF stable version
2020-10-20 13:36:43 +01:00
YAMAMOTO Takashi
89c9855d7b
esp32: Fix a few #endif comments
2020-10-20 18:50:28 +08:00
Xiang Xiao
2956b8516b
Fix nxstyle warning
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-20 01:45:06 -07:00
Xiang Xiao
eb4121ce38
Change all 'Nuttx' to 'NuttX'
...
Unify the naming convention
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-20 01:45:06 -07:00
liuhaitao
d5c6bfe6cf
arch: Add custom arch chip build support
...
Just like custom board build support, add custom arch chip build
support.
Change-Id: I71c87e6b2195501a1b1d728b71d7cbe344951057
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-10-20 14:48:16 +08:00
Brennan Ashton
5e8bcaa360
serial: nxstyle fixes
...
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
2020-10-20 14:43:19 +08:00
Juha Niskanen
94f0f55911
arch: serial: fix all TCGETS retrieving zero baud rate
...
cfsetispeed() now stores baud rate to c_cflag member of
struct termios, so it must not be overridden later on.
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2020-10-20 14:43:19 +08:00
Xiang Xiao
9928088868
libc: Don't fclose and fopen file in freopen
...
to avoid FILE pointer change after this commit:
commit b0797263ca
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Thu Aug 13 18:17:29 2020 +0800
libc/stdio: Allocate file_struct dynamically
1.Reduce the default size of task_group_s(~512B each task)
2.Scale better between simple and complex application
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-19 21:31:31 -07:00
Philippe Coval
bc14716d03
freedom-k64f: Regenerate demo/defconfig
...
With default settings,
it has been verified using:
./tools/refresh.sh --silent freedom-k64f/demo
Change-Id: I3cb96b82a392ac169d7887f5afda37a8b5daf992
Bug: https://github.com/apache/incubator-nuttx/issues/1988
Forwarded: https://github.com/apache/incubator-nuttx/pull/2037
Signed-off-by: Philippe Coval <rzr@users.sf.net>
2020-10-19 21:19:00 -07:00
Philippe Coval
bce251a791
freedom-k64f: Add demo configuration
...
Minimal configuration.
Each feature will added one after one
to track configuration flags.
Change-Id: Iab8aff1d489a518b6050ecba0f0b950a8b27745b
Bug: https://github.com/apache/incubator-nuttx/issues/1988
Forwarded: https://github.com/apache/incubator-nuttx/pull/2037
Signed-off-by: Philippe Coval <rzr@users.sf.net>
2020-10-19 21:19:00 -07:00
YAMAMOTO Takashi
60a6d9cfe5
arch/xtensa/src/esp32/esp32_wlan.c: Fix an unused var warning
...
chip/esp32_wlan.c: In function 'esp_ioctl':
chip/esp32_wlan.c:1262:30: warning: unused variable 'req' [-Wunused-variable]
struct mii_ioctl_notify_s *req;
^~~
2020-10-19 21:06:07 -07:00
Nathan Hartman
f8a3736b5c
tiva/cc13x0: Fix nxstyle errors
...
arch/arm/src/tiva/hardware/cc13x0/cc13x0_adi4_aux.h,
arch/arm/src/tiva/hardware/cc13x0/cc13x0_aux_smph.h,
arch/arm/src/tiva/hardware/cc13x0/cc13x0_ccfg.h,
arch/arm/src/tiva/hardware/cc13x0/cc13x0_ddi.h,
arch/arm/src/tiva/hardware/cc13x0/cc13x0_memorymap.h,
arch/arm/src/tiva/hardware/cc13x0/cc13x0_smph.h:
* Fix nxstyle errors.
2020-10-19 16:50:48 +01:00
Xiang Xiao
525f6da1c0
arch/armv7-a: Fix the wrong idle stack setup for SMP case
...
1.Get the stack pointer from sp instead of .Lstkinit's field
2.Make g_idle_topstack point to the end of the idle stack
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-19 09:43:58 +09:00
Philippe Coval
80be4a5d3c
freedom-k64f: Fix k64_buttons.c
...
Change-Id: I0c9f8903513fdbce05e9dc03a3b6c772f6920002
Bug: https://github.com/apache/incubator-nuttx/pull/1999
Signed-off-by: Philippe Coval <rzr@users.sf.net>
2020-10-18 19:23:56 -04:00
Xiang Xiao
a49a3eae51
tools: Remove the special handle for Ubuntu under Windows 10
...
since the Native Linux support could be reused for this case:
https://lists.apache.org/thread.html/r315682ed20bbeb2f1403cf592f892ef009274423189ffc5b3841a6a9%40%3Cdev.nuttx.apache.org%3E
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-18 11:48:19 -07:00
Xiang Xiao
e53779065e
Documentation: Fix the broken link in introduction/
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-18 11:46:20 -07:00
Xiang Xiao
652241a411
Documentation: Format introduction/supported_platforms.rst
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-18 11:46:20 -07:00
Xiang Xiao
8a7982bec0
Documentation: Change 32bit arch to 64bit arch
...
since NuttX support at least 64bit x86 and riscv now
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-18 11:46:20 -07:00
Xiang Xiao
4f1f25b516
Documentation: Remove the wrong comment about 64bit sim
...
64bit sim is fully supported now
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-18 11:46:20 -07:00
Xiang Xiao
55aff276ee
Documentation: Reorder Documentation/index.rst
...
1.Move quickstart to first
2.Move boards after introduction
3.Move reference after guides
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-18 11:45:05 -07:00
Xiang Xiao
81465f659d
Documentation: Move nsh/ to applications/
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-18 11:45:05 -07:00
Xiang Xiao
9abe505726
Documentation: Move syslog.rst to components/drivers/special/
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-18 11:45:05 -07:00