sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
43,375 Commits 1 Branch 0 Tags 291 MiB
e269b5fa28
Commit Graph

43375 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
David Sidrane
e269b5fa28 Revert "stm32h7 sdmmc: set SDMMC_CK pin to high speed (50 MHz) mode. When it was in slow speed mode (by default), the output SDMMC_CK clock rise and fall times were about 13 ns each, that were very slow and prevented some SDIO devices from working." 
This reverts commit 0aecfe8691.
 2021-12-19 01:40:35 -06:00
chao.an
c1c1882783 sim/usrsock: Reuse all addresses to avoid bind fail 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2021-12-18 13:15:46 -06:00
raiden00pl
87a8b1bed9 nrf52/Kconfig: NRF52_SDC_LE_CODED_PHY not available for nrf52832 2021-12-18 12:27:59 -06:00
raiden00pl
f3fdd5a019 arch/arm/src/nrf52/Kconfig: select IRQPRIO for SoftDevice 2021-12-18 09:13:36 -06:00
raiden00pl
a6c64795f4 arch/arm/src/nrf52/nrf52_sdc.c: raise error if BT device not selected 2021-12-18 09:13:36 -06:00
Ryan Abel
fd9ef2f6a2 fix: Correct issues with userled support on the Nucleo F4x1RE. 
Remove space following left parenthesis.

Add space after comment.

Update stm32_bringup.c
 2021-12-18 09:11:44 -06:00
raiden00pl
5ac469441e wireless/bluetooth/bt_hcicore.c: allocated recv buffer must reserve BLUETOOTH_H4_HDRLEN for head 
This was broken since 6c69b12000.
The first byte in io_data buffer must be the BT H4 packet type.
Without this change an assertion in bt_netdev.c:535 is always raised and nimble host layer crash.
 2021-12-18 09:11:29 -06:00
Diego Herranz
34c7bec0dc drivers/sensors/hdc1008: fix formatting after decimal point 
Modulo operation used to calculate digits after decimal point,
but if that result is <10, a leading zero wasn't added, giving a
wrong value.
 2021-12-17 23:36:38 -06:00
Diego Herranz
1fe41381d5 drivers/sensors/hdc1008: include signal.h 
Fix implicit declaration warning of nxsig_usleep.
 2021-12-17 23:36:38 -06:00
Jiuzhu Dong
9fb130cdea mm/circbuf: add sanity check for resize 
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
 2021-12-17 23:36:07 -06:00
Jiuzhu Dong
153254a496 sensor: reset interval,latency and circbuf when sensor is closed 
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
 2021-12-17 23:36:07 -06:00
raiden00pl
cf2dae8d79 arch/arm/src/nrf52/nrf52_sdc.c: nxstyle fixes 2021-12-17 12:35:17 -06:00
raiden00pl
af143c96fc arch/arm/src/nrf52/nrf52_sdc.c: public device address and static device address support 2021-12-17 12:35:17 -06:00
raiden00pl
c7f6ac63b0 arch/arm/src/nrf52/nrf52_sdc.c: add option to register UART H4 device 2021-12-17 12:35:17 -06:00
raiden00pl
23ef3ea64c arch/arm/src/nrf52/nrf52_sdc.c: remove nedless new lines 2021-12-17 12:35:17 -06:00
raiden00pl
26951f5018 arch/arm/src/nrf52/nrf52_sdc.c: print HCI opcode as hex 2021-12-17 12:35:17 -06:00
raiden00pl
07c9204fd6 arch/arm/src/nrf52/nrf52_sdc.c: fix status byte offset 2021-12-17 12:35:17 -06:00
raiden00pl
ab66800e13 arch/arm/src/nrf52/Kconfig: fix typos 2021-12-17 12:35:17 -06:00
raiden00pl
ba6e8696b2 arch/arm/src/nrf52/hardware/nrf52_ficr.h: add device address types 2021-12-17 12:35:17 -06:00
Jiuzhu Dong
f35c6d7ef1 syslog/rpmsg: using up_putc to force flush syslog_rpmsg buffer 
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
 2021-12-17 11:43:08 -06:00
Jiuzhu Dong
5a22d33475 up_putc: do up_putc when enable CONFIG_ARCH_LOWPUTC 
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
 2021-12-17 11:43:08 -06:00
anjiahao
9a53601ba9 sched:add holder in sem_trywait 
Avoid priority rollover

Signed-off-by: anjiahao <anjiahao@xiaomi.com>
 2021-12-17 11:28:27 -06:00
chao.an
b10dcf7c0d net/udp: fix the invaild udp destination address 
If the udp socket not connected, it is possible to have
multi-different destination address in each iob entry,
update the remote address every time to avoid sent to the
incorrect destination.

Signed-off-by: chao.an <anchao@xiaomi.com>
 2021-12-17 11:25:06 -06:00
raiden00pl
26c7ec5087 boards/arm/nrf52/nrf52832-dk: add sdc support 2021-12-17 11:24:48 -06:00
raiden00pl
4812f9f390 boards/arm/nrf52/nrf52840-dk: add sdc support 2021-12-17 11:24:48 -06:00
raiden00pl
2bb01b25bd boards/arm/nrf52/nrf52832-dk: add procfs support 2021-12-17 11:24:48 -06:00
raiden00pl
ff25063c62 boards/arm/nrf52/nrf52840-dk: add procfs support 2021-12-17 11:24:48 -06:00
Gustavo Henrique Nihei
3eec9fcb9b ci: Use GitHub Actions concurrency for cancelling duplicate jobs 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-12-17 11:24:08 -06:00
raiden00pl
07d295b8db add 5-Clause Nordic License barrier for Nordic SoftDevice Controller 2021-12-17 11:22:39 -06:00
Jiuzhu Dong
f04ca25f9d tmpfs: support fsync always successful 
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
 2021-12-17 13:27:21 -03:00
raiden00pl
e2c9f612c9 sched/init/nx_start.c: fix compile break when CONIFG_TASK_NAME_SIZE=0 2021-12-17 10:29:00 +01:00
xiewenxiang
b1d051b651 riscv/esp32c3: Initialize the BLE Mac 2021-12-16 22:31:02 -03:00
Alexander Lunev
12c128ae43 boards/emw3162: enabled internal pull-up resistors on SDIO bus 
in STM32F205 chip as there are not external pull-up resistors on SDIO bus on EMW3162 module.
 2021-12-16 07:16:49 -06:00
zhanghu6
f56aefaa41 sched_note: change uint32_t nbi_module into uint8_t array, because variables keep the same style that use uint8_t array 
sched_note: add note dump module tag definitions

NOTE_MODULE(a, b, c, d)

example:
define TEST_MODULE NOTE_MODULE('t', 'e', 's', 't')
sched_note_dump(TEST_MODULE, event, data, len);

define AUDIO_MODULE NOTE_MODULE('a', 'u', 'd', 'i')
sched_note_dump(AUDIO_MODULE, event, data, len);
 2021-12-16 04:18:17 -06:00
Gerson Fernando Budke
24c0e8bc75 boards/arm/samv7/samv71-xult: Add MCUboot support 
Refactor to use common sam_progmem implementation and enable MCUboot
support.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
 2021-12-16 06:56:42 -03:00
Gerson Fernando Budke
a6fc88740c boards/arm/samv7: Move MCUboot to common folder 
Move MCUboot bootloader implementation to samv7 common folder. This drop
all duplicated code and unify implementation.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
 2021-12-16 06:56:42 -03:00
Gerson Fernando Budke
b5868aed6f boards/arm/samv7: Introduce common folder 
This introduce common folder structre and rework scripts & tools
files. The linker scripts were reorganized to use best the current
infrastructure which uses a template to create a final samv7.ld
file based in the current SoC memories and bootloader definitions.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
 2021-12-16 06:56:42 -03:00
Gerson Fernando Budke
463fbfe975 boards/arm/samv7: Unify linker scripts 
After define memory sizes for samv7 it is possible unify linker scripts.
This add necessary changes to perform such operation.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
 2021-12-16 06:56:42 -03:00
Gerson Fernando Budke
2dd5578d50 arch/arm/src/samv7/Kconfig: Define mem sizes 
Current samv7 platform does not define SoC memories sizes. This define
both internal flash and sram memories sizes and update all defconfig
files.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
 2021-12-16 06:56:42 -03:00
zhuyanlin
5df041ca55 ioe-rpmsg: bind server to diffent ept struture 
N/A

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
 2021-12-16 01:29:24 -06:00
zhuyanlin
e75bcde0d6 driver:ioe_rpmsg: set_option add regval parameter 
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
 2021-12-16 01:29:24 -06:00
zhuyanlin
e43e1423d6 driver/ioexpander: add ioe_rpmsg server and client 
N/A

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
 2021-12-16 01:29:24 -06:00
chao.an
0ee7400fdf net/tcp: fix send deadlock if disconnect 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2021-12-16 01:29:10 -06:00
Alexander Lunev
0aecfe8691 stm32h7 sdmmc: set SDMMC_CK pin to high speed (50 MHz) mode. 
When it was in slow speed mode (by default), the output SDMMC_CK clock rise and
fall times were about 13 ns each, that were very slow and
prevented some SDIO devices from working.
 2021-12-16 01:28:05 -06:00
Takumi Ando
d0dd2684ce libc/unistd: getopt: Use argc to end parsing 
It should end parsing with argc even the argv are remaining
or it may access to invalid address.

Signed-off-by: Takumi Ando <t-ando@advaly.co.jp>
 2021-12-15 12:02:59 -06:00
chao.an
b11833cbba arch/assert: flush the syslog before stack dump 
flush the syslog before stack dump to avoid buffer overwrite

Signed-off-by: chao.an <anchao@xiaomi.com>
 2021-12-15 12:00:35 -06:00
Xiang Xiao
ed1e4ddfa7 libc: Add getprogname function 
defined here:
https://www.freebsd.org/cgi/man.cgi?query=getprogname&sektion=3

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-12-15 10:47:56 -06:00
zhanghu6
d05b9a9c79 note dump: add CONFIG_SCHED_INSTRUMENTATION_SWITCH 
1. If CONFIG_SCHED_INSTRUMENTATION_SWITCH is enabled, then these additional interfaces are expected:
        sched_note_suspend
        sched_note_resume
at the same time，If CONFIG_SMP is enabled，then expected：
        sched_note_cpu_pause
        sched_note_cpu_paused
        sched_note_cpu_resume
        sched_note_cpu_resumed
2. other board if enable SCHED_INSTRUMENTATION，SCHED_INSTRUMENTATION_SWITCH to defconfig.
 2021-12-15 07:07:00 -06:00
Petro Karashchenko
6c255f2d07 drivers/analog: add mcp48xx dac support 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2021-12-15 07:02:56 -06:00
chao.an
56ef1419dd arch/xtensa: set the current reg before print syslog 
ensure the semantics of the up_interrupt_context() works as expected

Signed-off-by: chao.an <anchao@xiaomi.com>
 2021-12-14 21:40:03 -06:00