the number of members in the group is zero.
Repetition step:
If using waitpid() to wait a task has exited, the waitpid will use
nxsing_kill with signal number 0 to determine if that task is still
alive, and will call group_signal to dispatch signal for each member
of the group and perform signal handing checks, it will assert at
sched/group/group_signal.c:261.
Change-Id: I75ef015a261101277436d742897ce68fed44b5da
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
Summary:
- This commit fixes the signest_test issue with lc823450-xgevk
Impact:
- SMP with CONFIG_SCHED_CHILD_STATUS=y
Testing:
- Tested with ostest with lc82345-xgevk:rndis
- NOTE: need to revert the commit 65274d5fdf
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- SP_SECTION was introduced to allocate spinlock in non-cachable
region mainly for Cortex-A to stabilize the NuttX SMP kernel
- However, all spinlocks are now allocated in cachable area and
works without any problems
- So SP_SECTION should be removed to simplify the kernel code
Impact:
- None
Testing:
- Build test only
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Pros:
* Reduce code differences
* Smaller allocations for !CONFIG_ARCH_USE_MODULE_TEXT
Cons:
* Likely to use more memory for !CONFIG_ARCH_USE_MODULE_TEXT in total
Tested with:
* sim:module on macOS
* esp32-devkit:nsh + CONFIG_MODULE on qemu
* lm3s6965-ek:qemu-protected + CONFIG_EXAMPLES_SOTEST on qemu
Summary:
- The CONFIG_SMP_IDLETHREAD_STACKSIZE was introduced to optimize
the idle stack size for other than CPU0
- However, there are no big differences between the idle stacks.
- This commit removes the config to simplify the kernel code
Impact:
- All SMP configurations
Testing:
- Tested with ostest with the following configs
- spresense:smp, spresense:rndis_smp
- esp32-devkitc:smp (QEMU), maix-bit:smp (QEMU)
- sabre-6quad:smp (QEMU), sabre-6quad:netnsh_smp (QEMU)
- raspberrypi-pico:smp, sim:smp (x86_64)
Signed-off-by: Masayuki Ishikawa <asayuki.Ishikawa@jp.sony.com>
arch: Allocate the space from the beginning in up_stack_frame
and modify the affected portion:
1.Correct the stack dump and check
2.Allocate tls_info_s by up_stack_frame too
3.Move the stack fork allocation from arch to sched
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
I've seen a module with 16 bytes .rodata alignment for xmm operations.
It was getting SEGV on sim/Linux because of the alignment issue.
The same module binary seems working fine after applying this patch.
Also, tested on sim/macOS and esp32 on qemu,
using a module with an artificially large alignment. (64 bytes)
Summary:
- I noticed that getopt() test in ostest wailed with
esp32-devkitc:smp and spresense:smp
- Finally, I found that the task-specific data is not
initialized.
- This commit fixes this issue
Impact:
- None
Testing:
- Tested with ostest esp32-devkitc:smp and spresense:smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
getopt() in the FLAT build environment is not thread safe. This is because global variables that are process-specific in Unix are truly global in the FLAT build. Moving the getopt() variables into TLS resolves this issue.
No side-effects are expected other than to getopt()
Tested with sim:nsh
since other subsystem doesn't need call these function anymore
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Idfb217c412db62d9f17f427310b75bb78785dc50
Fix missing semicolon at the end of a DEBUGASSERT statement:
sched/sched_sporadic.c: In function 'sporadic_budget_expire':
sched/sched_sporadic.c:512:15: error: expected ';' before 'period'
512 | period = (sporadic->repl_period >> 1) - unrealized;
| ^~~~~~
sched/sched_sporadic.c: In function 'nxsched_resume_sporadic':
sched/sched_sporadic.c:1078:19: error: expected ';' before 'period'
1078 | period = (sporadic->repl_period >> 1) - unrealized;
| ^~~~~~
Fix use of uninitialized variable in DEBUGASSERT statement:
sched/sched_sporadic.c:466:27: warning: 'sporadic' may be used uninitialized in this function [-Wmaybe-uninitialized]
466 | sporadic->nrepls > 0);
Also fixes some typos.
There should be no unexpected side-effects of this changed.
Tested with the stm32f4discovery:sporadic configuration (see PR #3097
Summary:
- This commit removes a redundant critical section in nxsem_tickkwait()
Impact:
- None
Testing:
- Tested with ping with the following configs
- spresense:rndis, spresense:rndis_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
it is wrong to define a new grpid_t, but not reuse pid_t,
because it make getpid(parent) == getppid(child) impossible.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
since there are situation which send singal to idle thread already,
CONFIG_SCHED_CHILD_STATUS=y
CONFIG_SCHED_HAVE_PARENT=y
Signo SIGCHLD will send to parent group, when child exit
Change-Id: Iceb2ac41948c1c3418839a3b5de70985d48c75d1
Signed-off-by: ligd <liguiding1@xiaomi.com>
Summary:
- During investigating critical section with semaphores, I noticed
that nxtask_flushstreams() is called with a critical section.
- The function calls lib_flushall() which handles a semaphore
in userspace.
- So it should be done without a critical section
Impact:
- SMP only
Testing:
- Tested with ostest the following configs
- esp32-devkitc:smp (QEMU), sabre-6quad:smp (QEMU)
- maix-bit:smp (QEMU), sim:smp
- spresense:smp
- Tested with nxplayer and stress test with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Otherwise, long-sleeping system calls using nxsig_timedwait
are not actually interrupted.
Tested with "ntpcstop" using lm3s6965-ek:qemu-protected config.
Summary:
- This commit changes spinlock APIs (spin_lock_irqsave/spin_unlock_irqrestore)
- In the previous implementation, the global spinlock (i.e. g_irq_spin) was used.
- This commit allows to use caller specific spinlock but also supports to use
g_irq_spin for backword compatibility (In this case, NULL must be specified)
Impact:
- None
Testing:
- Tested with the following configurations
- spresnse:wifi, spresense:wifi_smp
- esp32-devkitc:smp (QEMU), sabre6-quad:smp (QEMU)
- maxi-bit:smp (QEMU), sim:smp
- stm32f4discovery:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- During testing iperf -s with lc823450-xgevk:rndis,
I noticed that hard fault happens
- Finally, I found that group_kill_children() is not
not protected by a critical section
- This commit fixes this issue
Impact:
- SMP only
Testing:
- Tested with iperf with the following configurations
- lc823450-xgevk:rndis, spresense:rndis_smp
- Tested with ostest with the following configurations
- lc823450-xgevk:rndis, esp32-devkitc:smp (QEMU)
- sabre-6quad:smp (QEMU), maix-bit:smp (QEMU)
- spresense:rndis_smp, sim:smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit fixes comments and label in nxtask_assign_pid()
Impact:
- None
Testing:
- Built with spresense:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- During reviewing sched_lock() in nxtask_assign_pid(),
I noticed that g_pidhash is not protected by a critical section
- Because g_pidhash is accessed in an interrupt context,
it should be protected by a critical section.
- Actually, nxsched_foreach(), nxsched_get_tcb() and so on
use a critical section.
Impact:
- No impact
Testing:
- Tested with spresense:wifi (non-SMP) and spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Because this_task() and nxsched_get_tcb() are protected inside the funtcions
- Also, enter_critical_section() is used in nxsched_set_affinity()
Impact:
- No impact
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
let's call either nx_dup/nx_dup2 or file_dup/file_dup2
instead just like other fs api: xxx->nx_xxx->file_xxx
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I1aacfb9e25dc7b3fcb0345ff7b269b1953a01e5b
1. remove descript management in mqueue, save code size
2. use i_ops instead of i_mqueue to remove the dup logic
Change-Id: Ie88960e50ddcae9c87977c9ad65a45297c663291
Signed-off-by: ligd <liguiding1@xiaomi.com>
Summary:
- Calling sched_lock()/unlock() is unnecessary for SMP
because we've been using the critical section API
Impact:
- SMP only
Testing:
- Tested with smp and ostest with the following configurations
- sabre-6quad:smp (QEMU, dev board)
- spresense:smp, spresense:wifi_smp
- sim:smp, sim:ostest
- maix-bit:smp (QEMU)
- esp32-devkitc:smp (QEMU)
- lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
use the default testset implement on single core platform
that does not support test-and-set, more flexibility for
SMP drivers(using spinlock) if configured in a single-core mode.
Signed-off-by: chao.an <anchao@xiaomi.com>
Summary:
- During repeating ostest with sabre-6quad:smp (QEMU),
I noticed that pthread_rwlock_test sometimes stops
- Finally, I found that nxtask_exit() released a critical
section too early before context switching which resulted in
selecting inappropriate TCB
- This commit fixes this issue by moving nxsched_resume_scheduler()
from nxtask_exit() to up_exit() and also removing
spin_setbit() and spin_clrbit() from nxtask_exit()
because the caller holds a critical section
- To be consistent with non-SMP cases, the above changes
were done for all CPU architectures
Impact:
- This commit affects all CPU architectures regardless of SMP
Testing:
- Tested with ostest with the following configs
- sabre-6quad:smp (QEMU, dev board), sabre-6quad:nsh (QEMU)
- spresense:wifi_smp
- sim:smp, sim:ostest
- maix-bit:smp (QEMU)
- esp32-devkitc:smp (QEMU)
- lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
the action can't be dynamically allocated in any irq handler
so it's important to let the user extend the number as needed
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Id30c5d93003e63514c24f2ca0df2f634c4c63c5f
the message can't be dynamically allocated in any irq handler
so it's important to let the user extend the number as needed
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia26584c3815bac6cf24de4c88be0844ac8e8fba2
Summary:
- I found potential bugs in pthread_condclockwait.c
- Actually, sched_unlock() and wd_cancel() were misplaced.
- This commit fixes this issue
Impact:
- pthread_cond_clockwait() only
Testing:
- Tested with ostest with the following configs
- sabre-6quad:nsh, sabre-6quad:smp, sim:ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit introduces SP_WFE() and SP_SEV() to be used for spinlock
- Also, use wfe/sev instructions for ARMV7-A to reduce power consumption
Impact:
- ARMV7-a SMP only
Testing:
- sabre-6quad:smp (QEMU, dev board)
- maix-bit:smp, esp32-devkitc:smp, spresense:smp sim:smp (compile only)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit fixes global IRQ control logic
- In previous implementation, g_cpu_irqset for a remote CPU was
set in sched_add_readytorun(), sched_remove_readytorun() and
up_schedule_sigaction()
- In this implementation, they are removed.
- Instead, in the pause handler, call enter_critical_setion()
which will call up_cpu_paused() then acquire g_cpu_irqlock
- So if a new task with irqcount > 1 restarts on the remote CPU,
the CPU will only hold a critical section. Thus, the issue such as
'POSSIBLE FOR TWO CPUs TO HOLD A CRITICAL SECTION' could be resolved.
- Fix nxsched_resume_scheduler() so that it does not call spin_clrbit()
if a CPU does not hold a g_cpu_irqset
- Fix nxtask_exit() so that it acquires g_cpu_irqlock
- Update TODO
Impact:
- All SMP implementations
Testing:
- Tested with smp, ostest with the following configurations
- Tested with spresense:wifi_smp (NCPUS=2,4)
- Tested with sabre-6quad:smp (QEMU, dev board)
- Tested with maix-bit:smp (QEMU)
- Tested with esp32-core:smp (QEMU)
- Tested with lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
sched/signal/sig_timedwait.c:
* nxsig_timedwait(): Fix typo in comment:
"is store din" -> "is stored in"
include/nuttx/signal.h:
* Fix same typo in extern declaration of nxsig_timedwait().
Summary:
- I noticed that Cortex-A SGI can be masked
- We thought the SGI is not maskable
- Although I can not remember how I tested it before
- It actually works as expected now
- Also, fixed the number of remaining bugs in TODO
Impact:
- No impact
Testing:
- Tested with sabre-6quad:smp (QEMU and dev board)
- Add the following code in up_idle() before calling asm("WFI");
+ if (0 != up_cpu_index())
+ {
+ up_irq_save();
+ }
- Run the hello app, you can see "Hello, World!!"
- But nsh will freeze soon because arm_pause_handler is not called.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed waitpid_test stops with lc823450-xgevk:rndis
- The condition was CONFIG_DEBUG_ASSERTION=y
- Actually, the child task sent SIGCHILD but the parent couldn't catch the signal
- Then, I found that nx_waitid(), nx_waitpid() use sched_lock()
- However, a parent task and a child task are running on different CPUs
- So, sched_lock() is not enough and need to use a critical section
- Also, signal handling in nxtask_exithook() must be done in a critical section
Impact:
- SMP only
Testing:
- Tested with ostest with the following configurations
- lc823450-xgevk:rndis (CONFIG_DEBUG_ASSERTION=y and n)
- spresense:smp
- spresense:wifi_smp (NCPUS=2 and 4)
- sabre-6quad:smp (QEMU)
- esp32-core:smp (QEMU)
- maix-bit:smp (QEMU)
- sim:smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- sched_tasklistlock.c was introduced to stabilize NuttX SMP
- However, the current SMP implementation is stable by recent fixes
- So I decided to remove the file finally
Impact:
- SMP only
Testing:
- Tested with ostest with the following configurations
- spresense:smp
- spresense:wifi_smp (NCPUS=2 and 4)
- sabre-6quad:smp (QEMU)
- esp32-core:smp (QEMU)
- maix-bit:smp (QEMU)
- sim:smp
- lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed 'pthread_rwlock test' in ostest sometimes stops
- This issue happened with spresense:wifi_smp (NCPUS=4) and sim:smp
- Finally, I found an issue in pthread_join()
- In pthread_join(), sched_lock() is used to avoid pre-emption
- However, this is not enough for SMP
- Because another CPU would continue the pthread and exit sequences
- So we need to protect it with a critical section
Impact:
- Affect SMP only
Testing:
- Tested with ostest with the following configurations
- spresnese:smp
- spresense:wifi_smp (NCPUS=2, NCPUS=4)
- sabre-6quad:smp (QEMU)
- esp32-core:smp (QEMU)
- maix-bit:smp (QEMU)
- sim:smp
- lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Reference here:
https://pubs.opengroup.org/onlinepubs/009695399/functions/timer_create.html
DESCRIPTION
...
Each implementation shall define a set of clocks that can be
used as timing bases for per-process timers. All implementations
shall support a clock_id of CLOCK_REALTIME.
*** If the Monotonic Clock option is supported, implementations shall
support a clock_id of CLOCK_MONOTONIC. ***
...
Change-Id: Ia8e7302ed4a7e9ec11a0059bd68e9674ea942001
Signed-off-by: chao.an <anchao@xiaomi.com>
Summary:
- I noticed that nxsched_merge_pending() is called outside a critical section
- The issue happens if a new rtcb does not hold a critical section
- Actually, global IRQ control is done in nxsched_resume_scheduler() in nxtask_exit()
- However, nxsched_merge_pending() was called after calling nxsched_resume_scheduler()
- This commit fixes the issue by moving nxsched_merge_pending() before the function
- NOTE: the sequence was changed for SMP but works for non-SMP as well
Impact:
- This commit affects both SMP and non-SMP
Testing:
- Tested with ostest with the following configurations
- spresense:wifi_smp (NCPUS=2 and 4)
- spresense:wifi (non SMP)
- sabre-6quad:smp (QEMU)
- esp32-core:smp (QEMU)
- maix-bit:smp (QEMU)
- sim:smp
- lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
In file included from string/lib_strsignal.c:40:0:
string/lib_strsignal.c: In function ‘strsignal’:
string/lib_strsignal.c:142:12: error: ‘CONFIG_SIG_STOP’ undeclared (first use in this function); did you mean ‘CONFIG_SIG_PIPE’?
case SIGSTOP:
^
string/lib_strsignal.c:142:12: note: each undeclared identifier is reported only once for each function it appears in
string/lib_strsignal.c:147:12: error: ‘CONFIG_SIG_STP’ undeclared (first use in this function); did you mean ‘CONFIG_SIG_STOP’?
case SIGSTP:
Esnure all standard signal number is always defined
Change-Id: I3abce86079ebeba7bab038d7c770efc90b9cffd7
Signed-off-by: ligd <liguiding1@xiaomi.com>
Summary:
- I found a deadlock during Wi-Fi audio streaming test plus stress test
- The testing environment was spresense:wifi_smp (NCPUS=4)
- The deadlock happened because two CPUs called up_cpu_pause() almost simultaneously
- This situation should not happen, because up_cpu_pause() is called in a critical section
- Actually, the latter call was from nxsem_post() in an IRQ handler
- And when enter_critical_section() was called, irq_waitlock() detected a deadlock
- Then it called up_cpu_paused() to break the deadlock
- However, this resulted in setting g_cpu_irqset on the CPU
- Even though another CPU had held a g_cpu_irqlock
- This situation violates the critical section and should be avoided
- To avoid the situation, if a CPU sets g_cpu_irqset after calling up_cpu_paused()
- The CPU must release g_cpu_irqlock first
- Then retry irq_waitlock() to acquire g_cpu_irqlock
Impact:
- Affect SMP
Testing:
- Tested with spresense:wifi_smp (NCPUS=2 and 4)
- Tested with spresense:smp
- Tested with sim:smp
- Tested with sabre-6quad:smp (QEMU)
- Tested with maix-bit:smp (QEMU)
- Tested with esp32-core:smp (QEMU)
- Tested with lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Follow the POSIX description.
SIGTSTP should be sent when the Ctrl-Z characters is encountered, not SIGSTP.
Testing:
Built with hifive1-revb:nsh (CONFIG_SERIAL_TERMIOS=y, CONFIG_SIG_DEFAULT=y and CONFIG_TTY_SIGTSTP=y)
Summary:
- I noticed sched_lock() logic is different from sched_unlock()
- I think sched_lock() should use critical section
- Also, the code should be simple like sched_unlock()
- This commit fixes these issues
Impact:
- Affects SMP only
Testing:
- Tested with spresense:wifi_smp (both NCPUS=2 and 3)
- Tested with lc823450-xgevk:rndis
- Tested with maix-bit:smp (QEMU)
- Tested with esp32-core:smp (QEMU)
- Tested with sabre-6quad:smp (QEMU)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed DEBUGASSERT() happens in sched_unlock()
- The test was Wi-Fi audio streaming stress test with spresense 3cores
- Actually, g_cpu_schedlock was locked but g_cpu_lockset was incorrect
- Finally, I found that cpu was obtained before enter_critical_section()
- And the task was moved from one cpu to another cpu
- However, that call should be done within the critical section
- This commit fixes this issue
Impact:
- Affects SMP only
Testing:
- Tested with spresense:wifi_smp (both NCPUS=2 and 3)
- Tested with lc823450-xgevk:rndis
- Tested with maix-bit:smp (QEMU)
- Tested with esp32-core:smp (QEMU)
- Tested with sabre-6quad:smp (QEMU)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
to ensure the basic info(e.g. pid) setup correctly before call arch API
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I851cb0fdf22f45844938dafc5981b3f576100dba
Summary:
- During Wi-Fi audio streaming test, I found a deadlock in nxtask_exit()
- Actually, nxtask_exit() was called and tried to enter critical section
- In enter_critical_section(), there is a deadlock avoidance logic
- However, if switched to a new rtcb with irqcount=0, the logic did not work
- Because the 2nd critical section was treated as if it were the 1st one
- Actually, it tried to run the deadlock avoidance logic
- But nxtask_exit() was called with critical section (i.e. IRQ already disabled)
- So the logic did not work as expected because up_irq_restore() did not enable the IRQ.
- This commit fixes this issue by incrementing irqcount before calling nxtask_terminate()
- Also it adjusts g_cpu_irqlock and g_cpu_lockset
Impact:
- Affects SMP only
Testing:
- Tested with spresense:wifi_smp (smp, ostest, nxplayer, telnetd)
- Tested with sabre-6quad:smp with QEMU (smp, ostest)
- Tested with maix-bit:smp with QEMU (smp, ostest)
- Tested with esp32-core:smp with QEMU (smp, ostest)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
since nxtask_startup will initialize c++ global variables which shouldn't
be done inside the kernel thread
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Move sched/task/task/task_gettid.c to libs/libc/unistd/lib_gettid.c. gettid() is a dumb wrapper around getpid(). It is wasteful of resources to support TWO systme calls, one for getpid() and one for gettid(). Instead, move gettid() in the C library where it calls the single sysgtem call, getpid(). Much cleaner.
1.Reduce the default size of task_group_s(~512B each task)
2.Scale better between simple and complex application
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia872137504fddcf64d89c48d6f0593d76d582710
Summary:
- ARCH_GLOBAL_IRQDISABLE was initially introduced for LC823450 SMP
- At that time, i.MX6 (quad Cortex-A9) did not use this config
- However, this option is now used for all CPUs which support SMP
- So it's good timing for refactoring the code
Impact:
- Should have no impact because the logic is the same for SMP
Testing:
- Tested with board: spresense:smp, spresense:wifi_smp
- Tested with qemu: esp32-core:smp, maix-bit:smp, sabre-6quad:smp
- Build only: lc823450-xgevk:rndis, sam4cmp-db:nsh
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
it is useful to pass the nonempty argument to change the init task behaviour
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I684e9c76b9eac54404d0e4e63ab78e51e039c9a8
to save the preserved space(1KB) and also avoid the heap overhead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I694073f68e1bd63960cedeea1ddec441437be025
Change the preallocated message and descriptor from 32/24 to 4.
The total size is reduce from 1892 to 532
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I79d199465daef678986868f773876289859f42fc
1.Don't preallocate sigaction list since it's used only in the task context
2.Reduce the preserved item which is used only in the task context from 16 to 4
The total memory decrease from 1280B to 480B
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ib5d5a7365c7d443fc0e99c0d3ea943e85f67ca8c
since the maximum number of argument pass to wd_start in the whole
code base is 2 and change CONFIG_MAX_WDOGPARMS in some defconfig
from 1 to 2 oherwise pthread_condclockwait will fail
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ib6cb28b8c0722058849e7be916e164513431d21c
Found by clang-check:
sched/sched_waitpid.c:380:33: warning: Although the value stored to 'ret' is used in the enclosing expression, the value is never actually read from 'ret'
(pid != (pid_t)-1 && (ret = nxsig_kill(pid, 0)) < 0))
^ ~~~~~~~~~~~~~~~~~~
1 warning generated.
because nx_task_idle doesn't call sched_note_start. To avoid the
same error happen again in the furture, nx_task_idle is removed.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Make.dep file should be updated by .config changed after first make.
There are 2 cases affected for this problem:
1) Add source files by config symbol
2) Include header files in #ifdef directive
These 2 cases may not be included in Make.dep and this may prevent the
differential build from working correctly.
